Embedded Files
Guide for Configure Canon Printer.
Some router and hubs are available Access points. In this router and hub is feature an automatic link Button labelled 'WPS' provides the Wi-Fi Protected Setup.
In this type of router and hub are provide the facilities to connect PIXMA Printer to your network. Without and password required and easily enable it your connecting your device.
you can use this method and connect PIXMA Printer easily. So If your access point has available in your router device use WPS button. You can use this method please select 'WPS Connection Method' flow the given below instruction.
In case of your access point does not Support WPS Please flow another option is given below. you to connect your PIXMA Printer to flow this 'Standard Connection Method' below.
Method to connection WPS
There are some rules you must flow before you start to must be met to use the WPS push button method:
In this router, the access point has to physical WPS push button available. Sure please check your device's in the user manual.
If you do not find the push button please flow the given "Standard Connection method".
You must be using WPA2 security or WPA ('Wi-Fi Protected Access') protocol. Mostly enabled access points to use this protocol.
Step 1: You firstly sure the Printer is turned on.
Please press and hold the (wi-fi) key on the top of the printer until the alarm lamp flashes once.
Step 2: You must be sure in this lamp next to this key starts to blue flash and you go to your access point and press the WPS Key within 2 minutes.
How to access WPS On your access point. please see this details in your user manual.
In the blue wi-fi lamp on the printer will find the network is continuing flashing, its search, and wi-fi and power will flash again and again when connecting to the access point.
and next to, your printer and wifi network made a connection successful. the power lamp and wifi lamp will stop flashing and remain it.
Confirmation your network setting
after that, your printer has successfully connected that your wireless network is able to print. you can take the print out the network settings of your wireless printer.
1. If you first confirm your printer is turned on.
2. Then you confirm the Load the sheets of A4 or your required size of plane paper.
3. You wait for the 15 times alarm lamp flashes to Press and hold the (Cancel/Resume) key. and after that release it. Next to the network information page will be printed.
In the discussion about the printout, you sure check the 'Connection' indicates "Active" and that you can set the SSID Service Set Identifier (name of your wireless network) and Specify the correct name of your wifi network.
This ends the WPS Settings mode.
If you take the highest benefits of software next to makes the most out of your 'PIXMA MG3540'.
If you have no Installation CD avail on this related product. To continue this process you must be download software to continue it.
If you failed WPS wireless in this procedure flowing the guide. please contact us for further assistance for Canon Wireless Printer Setup.
Page updated
Google Sites
Report abuse