How to Block USB Drives and Removable Media using Group Policy

When connecting a new USB device to the computer, Windows automatically detects the device and installs an appropriate driver, which means that the user can almost immediately use a connected USB drive or device. In some organizations, the use of USB-devices (flash drives, USB HDDs, SD cards and so on) is blocked for security reasons to prevent security leakage of confidential data and the penetration of viruses into the internal corporate network. This article describes how to use the Group Policy (GPO) to disable external removable USB-drives, them from data writing or running executable files.

Contents:

·         Configuring GPO to Block USB drives and other External Storage Devices

·         GPO to Disable USB Drives for Certain Users

·         Blocking USB and Removable Devices via Registry and Group Policy Preferences

In Windows, starting from Windows 7 / Vista, you can flexibly manage access to external drives (USB, CD / DVD, floppy, tape etc.) using Group Policies. You can programmatically block the use of USB drives, without affecting such USB devices as a mouse, keyboard, printer, etc.

The USB device blocking policy will work if the infrastructure of your AD domain meets the following requirements:

1.   Active Directory schema version — Windows Server 2008 or higher.

Note. The set of policies allows to control the installation and use of removable media on Windows appeared only in this AD version (version 44).

2.   Desktop OSs – Windows Vista, Windows 7 or higher.

Tip. In Windows XP Group Policies you can’t restrict access to external USB devices: to block access to external media, administrators had to use third-party tools, or to prevent certain device drivers (UsbStor, Cdrom, Flpydisk, Sfloppy) from running (using the value 0 of the parameter Start in the registry key HKLMSYSTEMCurrentControlSetServices). However, since 2014, Windows XP support has ended, and today it is quite rare in corporate networks.

Configuring GPO to Block USB drives and other External Storage Devices

We are going to restrict the use of USB-drives for all computers in a certain AD container (OU). You can apply the USB block policy to the entire domain, but this will affect the servers and other technological devices. Let’s assume that we want to apply the policy to OU named Workstations. To do it, open the GPO management console (gpmc.msc), right-click on OU Workstations and create a new policy (Create a GPO in this domain and Link it here.)

Tip. In case of stand-alone computer, the USB-device restriction policy can be edited using a Local Group Policy Editor – gpedit.msc. In the Windows Home editions local group editor is missing, but you can install it like this: 

How to enable gpedit.msc on Windows 10 Home

Name the policy “Disable USB Access”.

After that, edit its settings (Edit).

External storage devices blocking settings are located in the user and computer sections of the GPO:

1.   User Configuration -> Policies -> Administrative Templates -> System -> Removable Storage Access.

2.   Computer Configuration -> Policies -> Administrative Templates -> System -> Removable Storage Access.

In the Removable Storage Access section, there are several policies allowing you to disable the use of different types of storage classes — CD/DVDs, FDD, USB-devices, tapes, etc.

·         CD and DVD: Deny execute access.

·         CD and DVD: Deny read access.

·         CD and DVD: Deny write access.

·         Custom Classes: Deny read access.

·         Custom Classes: Deny write access.

·         Floppy Drives: Deny execute access.

·         Floppy Drives: Deny read access.

·         Floppy Drives: Deny write access.

·         Removable Disks: Deny execute access.

·         Removable Disks: Deny read access.

·         Removable Disks: Deny write access.

·         All Removable Storage classes: Deny all access.

·         All Removable Storage: Allow direct access in remote sessions.

·         Tape Drives: Deny execute access.

·         Tape Drives: Deny read access.

·         Tape Drives: Deny write access.

·         Windows Portable Device – this class includes smartphones, tablets, players, etc.

·         WPD Devices: Deny write access.

As you can see, you can deny the launch of executable files for each device class (protect computers against viruses), prohibit reading data and writing / editing files on external media.

The “strongest” restrict policy — All Removable Storage Classes: Deny All Access – allows to deny the access to all types of external storage devices. To turn on the policy, open it and check Enable.

After enabling and updating the policy on client computers (gpupdate /force), the system detects the connected external devices (not only USB devices, but also any external drives) being connected and returns the following error message when user tries to open them:

Location is not available

Drive is not accessible. Access is denied

Tip. The same restriction can be set using the registry by creating DWORD parameter Deny_All with the value 00000001 in the registry key HKEY_CURRENT_USERSoftwarePoliciesMicrosoftWindowsRemovableStorageDevices.

In this policy section, more flexible restriction to use external USB-drives can be configured.

For example, to prevent writing data to USB flash drives and other types of USB drives, you should enable the policy Removable Disk: Deny write access.

In this case, users will be able to read the data stored on a USB flash drive, but when they attempt to write information to it, they will receive an access error:

Destination Folder Access Denied

You need permission to perform this action

You can deny to run executable and script files stored on USB-drives using Removable Disks: Deny execute access policy.

Note. In some cases, after updating policies on the client with the gpupdate /force command, access to removable USB devices is not immediately blocked. To apply USB blocking policies, you must restart the computer, enable the policy “Set time (in seconds) to force reboot” in the same GPO section. The computer will then force reboot.

GPO to Disable USB Drives for Certain Users

Quite often it is necessary to block USB drives for all users in the domain (except administrators).

The easiest way to do this is through the use of Security Filtering in the GPO. For example, to prevent the USB block policy from being applied to the Domain Admins group:

1.   In the Group Policy Management console, select your Disable USB Access policy.

2.   In the Security Filtering section, add the Domain Admins group.

3.   Go to the Delegation tab and click the Advanced in the security settings editor, specify that the Domain Admins group is not allowed to apply this GPO (Apply group policy – Deny).

If the task is different: you need to allow USB drives to be used by all but a certain group of users, you need to add your user group in the security settings of the policy with read and apply GPO permissions, and leave only the read permissions for the Authenticated Users or Domain Computers groups (uncheck the Apply group policy option).

Blocking USB and Removable Devices via Registry and Group Policy Preferences

You can more flexibly control access to external devices by configuring the registry settings that are set by the policies discussed above through the Group Policy Preferences (GPP). All the above policies correspond to certain registry keys in the HKLM (or HKCU) SOFTWAREPoliciesMicrosoftWindowsRemovableStorageDevices (by default this registry key is missing).

To enable one of these policies, you must create a new subkey in the specified key with the name of the device class you want to block access to (column 2) and REG_DWORD parameter with constraint type (Deny_Read or Deny_Write). If the value of this parameter is equal to 1, the restriction is active, if 0 – the prohibition of using this class of devices doesn’t work.

Policy name Device Class GUID Registry parameter name

Floppy Drives:
Deny read access {53f56311-b6bf-11d0-94f2-00a0c91efb8b} Deny_Read

Floppy Drives:
Deny write access {53f56311-b6bf-11d0-94f2-00a0c91efb8b} Deny_Write

CD and DVD:
Deny read access {53f56308-b6bf-11d0-94f2-00a0c91efb8b} Deny_Read

CD and DVD:
Deny write access {53f56308-b6bf-11d0-94f2-00a0c91efb8b} Deny_Write

Removable Disks:
Deny read access {53f5630d-b6bf-11d0-94f2-00a0c91efb8b} Deny_Read

Removable Disks:
Deny write access {53f5630d-b6bf-11d0-94f2-00a0c91efb8b} Deny_Write

Tape Drives:
Deny read access {53f5630b-b6bf-11d0-94f2-00a0c91efb8b} Deny_Read

Tape Drives:
Deny write access {53f5630b-b6bf-11d0-94f2-00a0c91efb8b} Deny_Write

WPD Devices:
Deny read access {6AC27878-A6FA-4155-BA85-F98F491D4F33} Deny_Read

  {F33FDC04-D1AC-4E8E-9A30-19BBD4B108AE}    

WPD Devices:
Deny write access {6AC27878-A6FA-4155-BA85-F98F491D4F33} Deny_Write
      {F33FDC04-D1AC-4E8E-9A30-19BBD4B108AE}

Thus, with the help of these registry keys and the ability to target GPP policies with Item-level targeting, you can flexibly apply policies that restrict the use of external storage devices to certain AD security groups, sites, OS versions, OUs and other computer characteristics (you can use even WMI queries). In this way, you can make sure that USB block policies are applied only to computers (users) that are included (or not included) to a certain AD group.

Note.

Similarly, you can create your own policies for device classes that are not listed in this list. You can find the device class ID in the driver properties in the value of the Device Class GUID attribute.