Model TPKN 16250
Embedded Files
Needs only 38mm space on the end of shaft to cut new keyway, without dismantling the shaft from assembly. Cutting time for 25 mm wide, 12.5 mm deep & 150 mm long keyway is less than 15 Minutes. M/c makes a Keyway on a Ball Mill Shaft, while the shaft is in assembly. Sealed lubrication permits operation at any position of the machine.
With the "V" type-mounting base, the Keyway Cutter will self-center onto an existing shaft, once the milling machine tool is clamped in place. The Keyway Cutter is capable of cutting keyways.
The TPKN 16250 is widely used by these industries:
Construction
Mining
Power Generation
Ship building
Pulp and paper
Steel and aluminum
Typical Applications:
Key slots on crank shafts
Keyways on tapered shafts
Keyways on pump shafts
Motor and pump repair
Mill radius slots in turbine shafts
Cutting new keyways on paper rolls
Chipper and conveyor repair
Keyways on motors
Shipping Dimensions of wooden box packing 62 x 50 x 35 cm. Net Wt. 40 kg., Gross Wt. 78 kg.
Comes with Metal Container:
Machine is supplied with the listed standard accessories in metal carring
case for ease of handling.
Flat clamp.
Chain clamp.
Stud mounting blocks (2 Nos.)
Chain mounting Block
Cylindrical washer.
6 mm & 8 mm Allen keys.
M 18 Studs (4 Nos.)
M 18 Hex Nuts (3 Nos.)
Split Bush for holding 10 mm Shank slot drills.
Handle
M 10 x 25 Allen Bolts (3 Nos.)
27 mm open spanner.
SPECIAL HIGH HELIX SLOT DRILLS
ranging from 8 mm. to 25 mm. in the steps of 2 mm. & Attachment for cutting keyway on tapper shaft are available at extra cost.
Cutters
Accessories
Accessories
Accessories
Cutters Specifications (in mm)
Google Sites
Report abuse