Team Syndicators - Components

MEGA 2560

BDT 1,995

Features :

1. High Endurance Non-volatile Memory Segments.

2. Write/Erase Cycles: 10,000 Flash.

3. Atmel QTouch library support.

4. JTAG (IEEE std. 1149.1 compliant) interface.

5. Real-time Counter with Separate Oscillator.

6. Programmable Watchdog Timer with Separate On-chip Oscillator.

7. On-chip Analog Comparator.

8. Interrupt and Wake-up on Pin Charge.

9. Power-on Reset and Programmable Brown-out Detection.

10. Internal Calibrated Oscillator.

11. External and Internal Interrupt Sources.

12. Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby, and Extended Standby.

4WD Smart Robot Chassis Kit

BDT 1,035

Features :

1. Very handy and simple in assembling/disassembling.

2. Strong components to withstand extreme terrain conditions.

3. Transparent Car Chassis.

4. Attractive design.

5. Double-layer structure, much of mounting holes, enough space

6. Easy to install a variety of control panels, sensors.

7. Educational toys, Ideal for the DIY platform.

ESP32-CAM WiFi + Bluetooth Camera Module Development Board ESP32 With Camera Module OV2640

BDT 848

Features :

1. The smallest 802.11b/g/n Wi-Fi BT SoC module.

2. Low power 32-bit CPU, can also serve the application processor.

3. Up to 160MHz clock speed, summary computing power up to 600 DMIPS.

4. Built-in 520 KB SRAM, external 4MPSRAM.

5. Supports UART/SPI/I2C/PWM/ADC/DAC.

6. Support OV2640 and OV7670 cameras, built-in flash lamp.

7. Support image WiFI upload.

8. Supports TF card.

9. Supports multiple sleep modes.

10. Embedded Lwip and FreeRTOS.

11. Supports STA/AP/STA+AP operation mode.

12. Support Smart Config/AirKiss technology.

13. Support for serial port local and remote firmware upgrades (FOTA).

433Mhz Wireless Serial Transceiver Module - 1 Kilometer

BDT 999

Features :

1. Long-distance wireless transmission (1,000m in open space/baud rate 5,000bps in the air).

2. Working frequency range (433.4-473.0MHz, up to 100 communication channels).

3. Maximum 100mW (20dBm) transmitting power (8 gears of power can be set).

4. Three working modes, adapting to different application situations

5. Built-in MCU, performing communication with an external device through a serial port.

6. The number of bytes transmitted unlimited to one time.

U-Blox NEO-6M GPS Module

BDT 606

Features :

1. 5Hz position update rate.

2. Operating temperature range: -40 TO 85°CUART TTL socket.

3. EEPROM to save configuration settings.

4. Rechargeable battery for Backup.

5. The cold start time of 38 s and the Hot start time of 1 s.

6. Supply voltage: 3.3 V.

7. Configurable from 4800 Baud to 115200 Baud rates. (default 9600).

8. SuperSense ® Indoor GPS: -162 dBm tracking sensitivity.

9. Support SBAS (WAAS, EGNOS, MSAS, GAGAN).

10. Separated 18X18mm GPS antenna.

L293D

BDT 999

Features :

1. 600ma Output Current Capability Per Channel.

2. 1.2a Peak Output Current (Non-Repetitive) Per Channel Enable Facility.

3. Overtemperature Protection.

4. Logical “0” Input Voltage Up To 1.5 V (High Noise Immunity).

5. Internal Clamp Diodes.

6. Featuring Unit rode L293 and L293D.

7. Wide Supply-Voltage Range: 4.5 V to 36 V.

8. Separate Input-Logic Supply.

9. Internal ESD Protection.

10. Thermal Shutdown.

11. High-Noise-Immunity Inputs.

12. Functional Replacements for SGS L293 and,

13. SGS L293D.

14. Output Current 1 A Per Channel.

Motor Shield L293D

BDT 210

Features :

1. 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer.

2. 4 H-Bridges: The L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection and internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC.

3. Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution).

4. Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.

5. Pull-down resistors keep motors disabled during power-up.

6. Big terminal block connectors to easily hook up wires (18-26AWG) and power.

7. Arduino reset button brought up top.

8. 2-pin terminal block and jumper to connect external power, for separate logic/motor supplies.

9. Tested compatible with Arduino Mega 1280 & 2560, Diecimila, Duemilanove, and UNO.

10. Download the easy-to-use Arduino software library, check out the examples and you’re ready to go!

Mini Servo SG90

BDT 149

Features :

1. High resolution.

2. Accurate positioning.

3. Fast control response.

4. Constant torque throughout the servo travel range.

5. Excellent holding power.

Mechanical Buzzer with LED Indicator AD16-22SM

BDT 155

Features :

1. Buzzer compatible with 22 mm diameter holes.

2. Voltage of 220 VAC. Intensity less than 20 mA.

3. Acoustic signal with the red viewfinder, mounted on a plastic structure with a metal thread.

4. Interior size (high x diameter): 50 x 20 mm.

5. Outside size (height x diameter): 15 x 30 mm.

JoyStick 5Pin Breakout Module For Arduino

BDT 95

Features :

1. 2.54mm pin interface leads.

2. Long service life and stable performance.

3. Standard interface and electronic building blocks.

4. Widely use in Arduino DIY projects.

5. Cross the rocker as a two-way 10K resistor, with the rocker in a different direction.

Breadboard (Medium Size)

BDT 85

Features :

1. 400 tie points.

2. 1 Double strip, Total of 300 tie points.

3. 2 Power lanes, a Total of 100 tie points in power lanes.

4. Perfect for Arduino shield prototyping and testing.

5. Plastic housing, and metal contact clips.

Jumper Wire 40 Pcs Set (Male to Male)

BDT 95

Features :

1. Compatible with 2.54mm spacing pin headers

2. 40pcs chromatic color jump wire

3. High quality and in good working condition

4. Durable and reusable

5. Easy to install and use

6. A popular choice for construction or repair

7. Be used for the electronic project and Genuine Arduino product

8. Flexible Breadboard Jumper Cable Wire allows you to plug and unplug easily for prototyping.

Resistor 100,1k,10k ohm

BDT 5

Battery Holder 6xAA

BDT 75

Features :

1. Cell Quantity: 6.

2. Battery type: AA.

3. Storage temperature: 25ºC.

4. Max Operate temperature: 80ºC.

5. Wire Length: 120 mm.

6. Distance between mounting holes: 76mm.

7. Mounting holes diameter: 3mm.

8. Color: Black.