How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-10-03 · 6 min read · Independent comparison
• Tatybo's biggest strength: three ways to connect — 2.4GHz wireless via a USB-A/USB-C dongle, Bluetooth 5.3, and a 3.5mm cable — plus virtual 7.1 surround and up to 30 hours of battery.
• Tatybo's biggest trade-off: it's a full over-ear headset with no active noise cancellation, a 3-hour charge time, touch-based volume control, and no wireless support on Xbox (cable only there).
• Audiovance's biggest strength: a wired 1-Tesla dynamic driver tuned for deep bass, rich mids and crisp highs, with sound isolation and a silver-plated, detachable MMCX cable.
• Audiovance's biggest trade-off: it's strictly wired over 3.5mm — no Bluetooth, no dongle — and in-ear fit depends on you getting the right eartip seal.
• Who each is for: Tatybo suits players who want one headset across PlayStation, PC, Switch and mobile; Audiovance suits listeners and gamers who prioritize sound fidelity and don't mind a cable.
The Tatybo WT5 is built around the idea that one headset should follow you across devices. Its core is a 50mm dynamic driver paired with 2.4GHz lossless wireless, which is the low-latency path you want for competitive play. Flip on virtual 7.1 surround and the dynamic range widens, which is exactly what helps you place footsteps and directional cues in FPS titles and sink into the wider soundstage of RPGs and racing games. The 20Hz–20kHz frequency range covers the full audible spread.
Comfort and endurance are clearly the second pillar. Tatybo rates the battery at up to 30 hours per charge (roughly 3 hours to refill), and the ear cups and headband use protein leather over soft loop cushions with an adjustable band. That combination is what makes long sessions bearable — and it's a headset that fits older kids, teens and adults, though Tatybo itself notes it runs a bit big for very young children.
Connectivity is where it earns its keep. A single 2.4GHz dongle covers PC, PS4, PS5, laptop and Switch, and you switch between 2.4GHz and Bluetooth 5.3 with a push of the 2G/BT button. There's also a 3.5mm cable in the box — which is the only way it works on Xbox. The boom mic is soft, so you can angle it close for voice pickup without worrying it'll snap. Buy it if you want wireless freedom, a boom mic and multi-device flexibility. Skip it if you need active noise cancellation or you game mainly on Xbox.
The Vibes 202M is a different animal entirely: a wired in-ear monitor aimed at musicians and audiophiles as much as gamers. Audiovance uses a 1-Tesla dynamic driver with master-tuned acoustics across an 8Hz–23kHz range, and the 16-ohm impedance makes it easy to drive from a laptop, desktop, MP3 player or console controller. The sound signature is described as deep bass, rich mids and crisp highs — a balanced, precise tuning rather than a bass-heavy one.
The cable is a genuine selling point. It's silver-plated and Litz-braided, terminating in gold-plated MMCX and a 3.5mm plug, and it's detachable — so if the cable ever fails, you swap it instead of the whole pair. The shell mixes metal, PC, resin and silicone in a semi-transparent design, and the fit relies on formable earhooks, a 360° rotative MMCX joint and a choice of X/M/L eartips.
That fit is the whole ballgame. Audiovance is explicit that you should try the different eartips and insert the buds snugly to get a secure seal — that seal is what delivers the bass, mids and treble and what makes the passive sound isolation work. Buy it if you want faithful audio, a replaceable cable and isolation that blocks out your surroundings. Skip it if you want wireless convenience, a boom mic or a headset you can wear loosely for hours.
• Best for wireless gaming → Tatybo Gaming Headset. 2.4GHz low-latency plus Bluetooth 5.3, no cable required.
• Best for console coverage → Tatybo Gaming Headset. Works on PS5, PS4, PC, Switch and laptop; Xbox only via the included 3.5mm cable.
• Best for sound fidelity → Audiovance Vibes 202M. A wired 1-Tesla driver with an 8Hz–23kHz range and a silver-plated, detachable MMCX cable.
• Best for long sessions → Tatybo Gaming Headset. Up to 30 hours of battery and over-ear protein-leather cushions.
• Best for noise blocking → Audiovance Vibes 202M. Passive sound isolation comes from a proper in-ear seal, not electronics.
• Best for travel and commuting → Audiovance Vibes 202M. In-ear, pocketable, and it ships with a carrying case and carabiner.
• Best for voice chat flexibility → Tatybo Gaming Headset. A soft, adjustable boom mic you can position close to your mouth.
• Best for cable durability → Audiovance Vibes 202M. The detachable MMCX cable can be replaced on its own.
In my opinion, most people comparing these two should buy the Tatybo Gaming Headset. It does more jobs: wireless 2.4GHz for competitive play, Bluetooth for your phone, a cable for Xbox, a boom mic for chat, and enough battery for a full day. The Audiovance Vibes 202M is the better pick only if you already know you want wired, in-ear, high-fidelity listening and don't need a boom mic or wireless range. If sound quality matters more to you than convenience, choose Audiovance. For everyone else, Tatybo is the safer, more versatile buy. Check the current price on Amazon before you commit.
how to use headphones with mic on pc
With the Tatybo, plug the 2.4GHz USB-A or USB-C dongle into your PC and set it as the default input and output device, or pair over Bluetooth 5.3. With the Audiovance Vibes 202M, plug the 3.5mm jack into your PC's headphone/mic combo port and select it as the input device.
how to connect headphones with mic on pc
The Tatybo switches between 2.4GHz and Bluetooth using the 2G/BT button — push down for 2.4GHz, push up for Bluetooth. The Audiovance is wired only, so it connects the moment you seat the 3.5mm plug; there's no pairing step at all.
how to use headphones with mic on phone
The Tatybo pairs to a phone over Bluetooth 5.3 for wireless use. The Audiovance Vibes 202M works with any phone that has a 3.5mm jack, or through an adapter on phones that don't — its inline remote controls volume.
how to test headphones with mic
Play a track or game audio and confirm both channels are audible, then check the mic by recording a short voice clip and playing it back. On the Audiovance, try the X/M/L eartips and reseat the buds until you get a snug seal — that seal is what verifies you're hearing the intended bass and treble.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: G GVOEARS HS60 vs MOSWAG Earbuds: Noise Isolating Gaming, NALMOPG TRN MT1 vs FiiO EH11, erjigo KZ ZSN Pro vs Matast Earbuds, Turtle Beach Stealth 600 vs DEQIANG Solid Wood Headphone