Project

Fiber Characterization

This project involves the extraction and characterization of novel natural fibers from different plant sources, focusing on their physical, mechanical, and chemical properties. The study aims to evaluate the suitability of these fibers as reinforcement materials in composite development. Based on the observed performance, potential applications are proposed for use in engineering, industrial, and sustainable material fields.

Hossain, S., Saeed, M.A., Islam, T. et al. Characterization of novel Annona reticulata fiber as a potential reinforcement for composite applications. Scientific Reports, 15, 31052 (2025). https://doi.org/10.1038/s41598-025-15601-9
Hossain, S., Saeed, M. A., Islam, T., Jalil, M. A., Islam, S., Mahmud, R. U., Das, S. C. (2026). Characterization of raw and alkaline-treated novel lignocellulosic fibers from Mimusops elengi leaves for potential composite reinforcements. Journal of Natural Fibers, 23(1). https://doi.org/10.1080/15440478.2025.2609489
Hossain, Shahin, Jalil, M. A., Islam, T., & Rahman, M. M. (2022). A low-density cellulose rich new natural fiber extracted from the bark of jack tree branches and its characterizations. Heliyon, 8(11), e11667. https://doi.org/10.1016/j.heliyon.2022.e11667

Composites

The development of fiber-reinforced composite materials using bamboo, jute, coir, jackfruit, and glass fibers focuses on creating strong, lightweight, and sustainable alternatives to conventional materials. By combining natural and synthetic fibers, these composites are engineered to enhance mechanical performance while reducing environmental impact. The resulting materials are suitable for a wide range of structural, industrial, and engineering applications.

Md. Ariful Islam, T., Islam, M., & Islam, M. S. (2025). Enhanced properties of bamboo short fiber-reinforced polymer composites with alkali and graphene oxide. Materials Advances, 6, 4738-4754. https://doi.org/10.1039/D5MA00158G
Hossain, M. M., Singha, P. K., Sadia, H. T., Rahman, H., Islam, T., & Das, A. K. (2025). Mechanical properties of raw jute and coir fiber-reinforced polyester composites through fiber orientation: A study on tensile, impact, and hardness characteristics. Mechanics of Composite Materials, 61, 53–66 (2025). https://doi.org/10.1007/s11029-025-10261-2
Das, S. C., Das, S. C., Rahman, M. M., Sayeed, M. A., Khan, M. M., Jahan, M. S., & Islam, T. (2025). Analysis of mechanical and thermal properties of hybrid FRP composites with short jute, coir and glass fibers—effects of different fiber loading and waste valorization. Materials Circular Economy, 7(1), 42. https://doi.org/10.1007/s42824-025-00197-2
Mahmud, S. H., Das, S. C., Saha, A., Islam, T., Paul, D., Akram, M. W., Jahan, M. S., Mollah, M. Z. I., Gafur, M. A., & Khan, R. A. (2025). Effect of glass fiber hybridization and radiation treatment to improve the performance of sustainable natural fiber-based hybrid (jute/glass) composites. Next Sustainability, 6(100104), 100104. https://doi.org/10.1016/j.nxsust.2025.100104

Nanoparticles

This research focuses on the eco-friendly synthesis and application of functional nanoparticles for advanced textile and material applications. Bio-derived nanoparticles, including silk fibroin, silver, and chitosan nanoparticles, are developed to enhance antibacterial, antistatic, and functional properties of textile substrates. These nanomaterial-based treatments demonstrate significant potential for use in smart, protective, and high-performance textile systems.

Pranto, M. A. M., Kabir, M., Haque, M. A., Hasan, M. S., Saha, J., Rahman, M., & Islam, T. (2025). Synthesis of silk fibroin and silver nanoparticles for enhanced functionality in cellulosic textiles. Scientific Reports, 15(1), 38559. https://doi.org/10.1038/s41598-025-22602-1
Mia, M., Alim, M., Mishfa, K.F. et al. An innovative approach for antibacterial and anti-static nylon woven fabric through eco-friendly synthesized chitosan nanoparticles. Discover Applied Sciences, 7, 289 (2025). https://doi.org/10.1007/s42452-025-06660-8

Packaging Materials

This research focuses on the development of sustainable and bio-based packaging materials derived from natural and recycled fibers. Emphasis is placed on jute-based hybrid nonwoven fabrics, post-consumer cotton textiles, and jute waste to create eco-friendly packaging solutions with improved mechanical strength and environmental performance. The outcomes demonstrate the potential of these materials as viable alternatives to conventional synthetic packaging for sustainable and circular economy applications.

Shahid, M. A., Habib, M. A., Hossain, I., Limon, M. G. M., Islam, T., & Bhat, G. (2024). Eco-friendly jute-based hybrid nonwoven fabric for packaging applications. ACS Omega, 9(44), 44639–44645. https://doi.org/10.1021/acsomega.4c07255
Shiddique, M. N. A., Islam, K., Islam, T., Hosen, M. D., Islam, M. A., Islam, M. I., & Bhat, G. (2024). Bio‐based packaging materials from post‐consumer cotton textiles. Advances in Polymer Technology, 2024(1). https://doi.org/10.1155/2024/5652311
Islam, K., Islam, T., Shiddique, M. N. A., Roy, M. N., Fahimuzzaman, M., Islam, M. A., Bashar, M. M., & Khan, M. A. (2024). Utilization of jute waste for sustainable Eco-film preparation. ACS Sustainable Resource Management, 1(3), 517–529. https://doi.org/10.1021/acssusresmgt.3c00123

Antimicrobial Textiles

This project explores the development of antimicrobial textiles through sustainable and bio-based functionalization techniques. Natural agents such as plant extracts, essential oils, and bio-derived emulsions are applied to cellulosic and blended fabrics to impart antibacterial and UV-protective properties. The resulting functional textiles demonstrate enhanced durability, safety, and effectiveness, making them suitable for applications in healthcare, protective clothing, and hygienic textile products.

Toki, G. F. I., Alave, R. K. K., Duti, S. F. J., Sharif, N., Md, Mia, R., Dutta, S., & Islam, T. (2024). Sustainable antimicrobial functionalization of cotton with lavender oil and jackfruit latex. Surface Innovations, 1–10. https://doi.org/10.1680/jsuin.24.00058
Hosen, M. I., Pranta, A. D., Hasan, M. M., Islam, M. S., Islam, T., Zohora, F. T., Islam, M. I., Bashar, M. M., & Bhat, G. (2024). Preparation and application of black cumin seed oil emulsion with enhanced stability for antimicrobial treatment of cellulosic fabric. Fibers and Polymers. https://doi.org/10.1007/s12221-024-00601-9
Hossain, S., Jalil, M. A., Islam, T., Mahmud, R. U., Kader, A., & Islam, M. K. (2024). Enhancement of antibacterial and UV protection properties of blended wool/acrylic and silk fabrics by dyeing with the extract of Mimusops elengi leaves and metal salts. Heliyon, e25273, e25273. https://doi.org/10.1016/j.heliyon.2024.e25273
Mollick, S., Islam, T., Miah, M.R., Riad, M.M.H., Chakrabarty, T., Hossen, M.T., & Islam, M.T. (2023). Development of Antibacterial Cotton Fabric Utilizing Microencapsulation Technique from Dragon Fruit Peel Extract, Fibers and Polymers. https://doi.org/10.1007/s12221-023-00353-y

MOF, MXene, Biomaterials

This project explores advanced functional materials including metal–organic frameworks (MOFs), MXenes, and biomaterials for high-performance and biomedical applications. Emphasis is placed on the synthesis and functionalization of nanostructured materials, such as drug-loaded MOFs, to enhance loading efficiency and controlled release behavior. These materials demonstrate strong potential for applications in drug delivery, biomedical engineering, and next-generation functional systems.

Rahman, M., Kabir, M., Islam, T., Wang, Y., Meng, Q., Liu, H., Chen, S., & Wu, S. (2025). Curcumin-loaded ZIF-8 nanomaterials: Exploring drug loading efficiency and biomedical performance. ACS Omega, 10(3), 3067–3079. https://doi.org/10.1021/acsomega.4c09945
Liza, L., Kabir, M. H., Kabir, M., Rafi, M. N., Ruidong, X., Rahman, M. A., & Islam, T. (2025). Flexible fabric-integrated PAAm–LiCl hydrogel pressure sensor for wearable and soft robotics applications. Materials Advances. https://doi.org/10.1039/D5MA00942A

Page updated

Google Sites

Report abuse