Completed Work:

• The second whaler has been installed.

• Temporary power has been installed.

• Installed concrete waler.

• Drove sheeting inside the excavation.

• Excavation of the sheeted hole.

• Backfilled to elevation -11.50

• Installation of Rebar for Wet Well & Channel Grinder Walls

• Form and Pour Slab & Walls for Channel Grinder

• Form and Pour Slab & Walls for Wet Well

• Dewater Wet Well

• Removal of Third Steel Whaler (Bottom)

• Striping Forms

• Installation of the Manhole inside Sheeting

• Testing of Structures

• Back Filling

• Pulled Sheeting

• Top Slab Decking & Rebar Installation

• Installed Vent Piping & Hatches – Wet Well

• Installed Influent Top Slab

• Form & Pour Concrete Slab - Electrical Building

• De-Mob Large Crane

• Excavated & Set Precast Valve Vault

• Excavated & Set Precast Meter Vault

• Form & Pour Baffle Wall

• Installed Slide Gates Inside Influent Structure

• Excavated & Set Two Precast Electrical Handhole Boxes

• Abandonment of Existing Well

• Set Channel Grinder

• Installation of Interior Piping in Wet Well

• Set Precast Electrical Building

• Form & Pour Concrete Pads for Pump Bases

• Set Pumps Inside Wet Well Structure

• Layout / Form / Pour Transformer Pad

• Installation of Misc. Metals (Railings, etc.)

• Re-established Existing Berm (New Trees, Topsoil, Seeding)

• Installation of Vent Piping

• Layout / Form / Pour Generator Pad

• Installation of Interior Valve Vault Piping

• Installed 8" Service Drain Piping

• Installed 16" Force Main (Diesel Bypass) Piping

• Installed Partial 12" Force Main (Diesel Bypass) Piping

• Installed Partial 20" Force Main (Effluent) Piping up to Tie-In Location

• Completed Interior Meter Vault Piping

• Installed 16" Force Main (Influent) Piping up to Tie-In Location

• Pressure Test Installed Yard & Vault Piping 

• Bore 2" PVC Water Service Under Road

• Began Installing 2" PVC Water Service Throughout Site

• Tie-In 10" DIP Discharge Piping (Valve Vault to Wet Well)

• Installed 1/2" Injection Quill for Odor Control up to Tie-In Point

• 2" Water Service & Install Yard Hydrant

• Finished Grout Filling / Fillets

• Pipe Coatings in Meter & Valve Vaults

• Injection Quill for Odor Control

• Completed Concrete and Steel Pipe Supports 

• Began Installing 36" PVC Pipe

• Install Ultrasonic & Float Tree inside Wet Well

• Receive and Set the New 1000kw Generator onto Concrete Pad

• Form/Rebar/Pour Concrete Bypass Pump Pad

• Set Bypass Diesel Pump 

• Tie-In 16" SST Suction Pipe to Diesel Bypass Pump

• Complete Interior Coatings - Wet Well Concrete Structure

• Set-Up & Begin Running Temporary Bypassing

• Installation of MH #2

• Tie-In Existing 24" Sewer to New MH #2

• Installation of Remaining 36" & 16" PVC Pipe

• Installation of Remaining 12" DIP Force Main & Tie Into Diesel Bypass Pump 

• Completed Tie-In to Existing 20" Sewer Line

• Testing of New MH, 36", 16" & 12" Sewer Lines

Work scheduled for the month of April:

• Final Electrical Connection (within Site & inside Electrical Building)

• Continue Monitoring of Temporary Bypassing

• Continuation of New Pump Station Start-Up Testing

• Removal of Temporary Bypass Pumping

• Demolition of Existing Pump Station

• Site Grading & New Asphalt

• Punch List Items

Completed Work:

• The second whaler has been installed.

• Temporary power has been installed.

• Installed concrete waler.

• Drove sheeting inside the excavation.

• Excavation of the sheeted hole.

• Backfilled to elevation -11.50

• Installation of Rebar for Wet Well & Channel Grinder Walls

• Form and Pour Slab & Walls for Channel Grinder

• Form and Pour Slab & Walls for Wet Well

• Dewater Wet Well

• Removal of Third Steel Whaler (Bottom)

• Striping Forms

• Installation of the Manhole inside Sheeting

• Testing of Structures

• Back Filling

• Pulled Sheeting

• Top Slab Decking & Rebar Installation

• Installed Vent Piping & Hatches – Wet Well

• Installed Influent Top Slab

• Form & Pour Concrete Slab - Electrical Building

• De-Mob Large Crane

• Excavated & Set Precast Valve Vault

• Excavated & Set Precast Meter Vault

• Form & Pour Baffle Wall

• Installed Slide Gates Inside Influent Structure

• Excavated & Set Two Precast Electrical Handhole Boxes

• Abandonment of Existing Well

• Set Channel Grinder

• Installation of Interior Piping in Wet Well

• Set Precast Electrical Building

• Form & Pour Concrete Pads for Pump Bases

• Set Pumps Inside Wet Well Structure

• Layout / Form / Pour Transformer Pad

• Installation of Misc. Metals (Railings, etc.)

• Re-established Existing Berm (New Trees, Topsoil, Seeding)

• Installation of Vent Piping

• Layout / Form / Pour Generator Pad

• Installation of Interior Valve Vault Piping

• Installed 8" Service Drain Piping

• Installed 16" Force Main (Diesel Bypass) Piping

• Installed Partial 12" Force Main (Diesel Bypass) Piping

• Installed Partial 20" Force Main (Effluent) Piping up to Tie-In Location

• Completed Interior Meter Vault Piping

• Installed 16" Force Main (Influent) Piping up to Tie-In Location

• Pressure Test Installed Yard & Vault Piping 

• Bore 2" PVC Water Service Under Road

• Began Installing 2" PVC Water Service Throughout Site

• Tie-In 10" DIP Discharge Piping (Valve Vault to Wet Well)

• Installed 1/2" Injection Quill for Odor Control up to Tie-In Point

• 2" Water Service & Install Yard Hydrant

• Finished Grout Filling / Fillets

• Pipe Coatings in Meter & Valve Vaults

• Injection Quill for Odor Control

• Completed Concrete and Steel Pipe Supports 

• Began Installing 36" PVC Pipe

• Install Ultrasonic & Float Tree inside Wet Well

• Receive and Set the New 1000kw Generator onto Concrete Pad

• Form/Rebar/Pour Concrete Bypass Pump Pad

• Set Bypass Diesel Pump 

• Tie-In 16" SST Suction Pipe to Diesel Bypass Pump

Work scheduled for the month of February:

• Continue Electrical Work (within Site & inside Electrical Building)

• Complete Interior Coatings - Wet Well Concrete Structure

• Set-Up & Begin Running Temporary Bypassing

• Install Remaining 36" & 16" PVC Pipe

• Install MH #2

• Install Remaining 12" DIP Force Main (Diesel Bypass) 

• Make Tie-Ins to Existing Sewer Lines

• Prep for New Pump Station Start-Up

Completed Work:

• The second whaler has been installed.

• Temporary power has been installed.

• Installed concrete waler.

• Drove sheeting inside the excavation.

• Excavation of the sheeted hole.

• Backfilled to elevation -11.50

• Installation of Rebar for Wet Well & Channel Grinder Walls

• Form and Pour Slab & Walls for Channel Grinder

• Form and Pour Slab & Walls for Wet Well

• Dewater Wet Well

• Removal of Third Steel Whaler (Bottom)

• Striping Forms

• Installation of the Manhole inside Sheeting

• Testing of Structures

• Back Filling

• Pulled Sheeting

• Top Slab Decking & Rebar Installation

• Installed Vent Piping & Hatches – Wet Well

• Installed Influent Top Slab

• Form & Pour Concrete Slab - Electrical Building

• De-Mob Large Crane

• Excavated & Set Precast Valve Vault

• Excavated & Set Precast Meter Vault

• Form & Pour Baffle Wall

• Installed Slide Gates Inside Influent Structure

• Excavated & Set Two Precast Electrical Handhole Boxes

• Abandonment of Existing Well

• Set Channel Grinder

• Installation of Interior Piping in Wet Well

• Set Precast Electrical Building

• Form & Pour Concrete Pads for Pump Bases

• Set Pumps Inside Wet Well Structure

• Layout / Form / Pour Transformer Pad

• Installation of Misc. Metals (Railings, etc.)

• Re-established Existing Berm (New Trees, Topsoil, Seeding)

• Installation of Vent Piping

• Layout / Form / Pour Generator Pad

• Installation of Interior Valve Vault Piping

• Installed 8" Service Drain Piping

• Installed 16" Force Main (Diesel Bypass) Piping

• Installed Partial 12" Force Main (Diesel Bypass) Piping

• Installed Partial 20" Force Main (Effluent) Piping up to Tie-In Location

• Completed Interior Meter Vault Piping

• Installed 16" Force Main (Influent) Piping up to Tie-In Location

• Pressure Test Installed Yard & Vault Piping 

• Bore 2" PVC Water Service Under Road

• Began Installing 2" PVC Water Service Throughout Site

• Tie-In 10" DIP Discharge Piping (Valve Vault to Wet Well)

• Installed 1/2" Injection Quill for Odor Control up to Tie-In Point

• 2" Water Service & Install Yard Hydrant

• Finished Grout Filling / Fillets

• Pipe Coatings in Meter & Valve Vaults

• Injection Quill for Odor Control

• Completed Concrete and Steel Pipe Supports 

• Began Installing 36" PVC Pipe

• Install Ultrasonic & Float Tree inside Wet Well

• Receive and Set the New 1000kw Generator onto Concrete Pad

Work scheduled for the month of January:

• Continue Electrical Work (within Site & inside Electrical Building)

• Complete Interior Coatings - Wet Well Concrete Structure

• Continue Installing 36" PVC Pipe

• Begin Forming/Rebar/Pouring Concrete Bypass Pump Pad

• Install Bypass Diesel Pump 

• Install Remaining 12" DIP Force Main (Diesel Bypass) 

• Make Tie-Ins to Existing Sewer Lines

Completed Work:

• The second whaler has been installed.

• Temporary power has been installed.

• Installed concrete waler.

• Drove sheeting inside the excavation.

• Excavation of the sheeted hole.

• Backfilled to elevation -11.50

• Installation of Rebar for Wet Well & Channel Grinder Walls

• Form and Pour Slab & Walls for Channel Grinder

• Form and Pour Slab & Walls for Wet Well

• Dewater Wet Well

• Removal of Third Steel Whaler (Bottom)

• Striping Forms

• Installation of the Manhole inside Sheeting

• Testing of Structures

• Back Filling

• Pulled Sheeting

• Top Slab Decking & Rebar Installation

• Installed Vent Piping & Hatches – Wet Well

• Installed Influent Top Slab

• Form & Pour Concrete Slab - Electrical Building

• De-Mob Large Crane

• Excavated & Set Precast Valve Vault

• Excavated & Set Precast Meter Vault

• Form & Pour Baffle Wall

• Installed Slide Gates Inside Influent Structure

• Excavated & Set Two Precast Electrical Handhole Boxes

• Abandonment of Existing Well

• Set Channel Grinder

• Installation of Interior Piping in Wet Well

• Set Precast Electrical Building

• Form & Pour Concrete Pads for Pump Bases

• Set Pumps Inside Wet Well Structure

• Layout / Form / Pour Transformer Pad

• Installation of Misc. Metals (Railings, etc.)

• Re-established Existing Berm (New Trees, Topsoil, Seeding)

• Installation of Vent Piping

• Layout / Form / Pour Generator Pad

• Installation of Interior Valve Vault Piping

• Installed 8" Service Drain Piping

• Installed 16" Force Main (Diesel Bypass) Piping

• Installed Partial 12" Force Main (Diesel Bypass) Piping

• Installed Partial 20" Force Main (Effluent) Piping up to Tie-In Location

• Completed Interior Meter Vault Piping

• Installed 16" Force Main (Influent) Piping up to Tie-In Location

• Pressure Test Installed Yard & Vault Piping 

• Bore 2" PVC Water Service Under Road

• Began Installing 2" PVC Water Service Throughout Site

• Tie-In 10" DIP Discharge Piping (Valve Vault to Wet Well)

• Installed 1/2" Injection Quill for Odor Control up to Tie-In Point

• 2" Water Service & Install Yard Hydrant

• Finished Grout Filling / Fillets

• Pipe Coatings in Meter & Valve Vaults

• Injection Quill for Odor Control

Work scheduled for the month of December:

• Continue Electrical Work (within Site & inside Electrical Building)

• Complete Concrete and Steel Pipe Supports 

• Complete Interior Coatings - Wet Well Concrete Structure

• Begin Installing 36" PVC Pipe

• Begin Forming/Rebar/Pouring Concrete Bypass Pump Pad

• Install Ultrasonic & Float Tree inside Wet Well

Completed Work:

• The second whaler has been installed.

• Temporary power has been installed.

• Installed concrete waler.

• Drove sheeting inside the excavation.

• Excavation of the sheeted hole.

• Backfilled to elevation -11.50

• Installation of Rebar for Wet Well & Channel Grinder Walls

• Form and Pour Slab & Walls for Channel Grinder

• Form and Pour Slab & Walls for Wet Well

• Dewater Wet Well

• Removal of Third Steel Whaler (Bottom)

• Striping Forms

• Installation of the Manhole inside Sheeting

• Testing of Structures

• Back Filling

• Pulled Sheeting

• Top Slab Decking & Rebar Installation

• Installed Vent Piping & Hatches – Wet Well

• Installed Influent Top Slab

• Form & Pour Concrete Slab - Electrical Building

• De-Mob Large Crane

• Excavated & Set Precast Valve Vault

• Excavated & Set Precast Meter Vault

• Form & Pour Baffle Wall

• Installed Slide Gates Inside Influent Structure

• Excavated & Set Two Precast Electrical Handhole Boxes

• Abandonment of Existing Well

• Set Channel Grinder

• Installation of Interior Piping in Wet Well

• Set Precast Electrical Building

• Form & Pour Concrete Pads for Pump Bases

• Set Pumps Inside Wet Well Structure

• Layout / Form / Pour Transformer Pad

• Installation of Misc. Metals (Railings, etc.)

• Re-established Existing Berm (New Trees, Topsoil, Seeding)

• Installation of Vent Piping

• Layout / Form / Pour Generator Pad

• Installation of Interior Valve Vault Piping

• Installed 8" Service Drain Piping

• Installed 16" Force Main (Diesel Bypass) Piping

• Installed Partial 12" Force Main (Diesel Bypass) Piping

• Installed Partial 20" Force Main (Effluent) Piping up to Tie-In Location

• Completed Interior Meter Vault Piping

• Installed 16" Force Main (Influent) Piping up to Tie-In Location

• Pressure Test Installed Yard & Vault Piping 

• Bore 2" PVC Water Service Under Road

• Began Installing 2" PVC Water Service Throughout Site

• Tie-In 10" DIP Discharge Piping (Valve Vault to Wet Well)

• Installed 1/2" Injection Quill for Odor Control up to Tie-In Point

Work scheduled for the month of November:

• Tie-in 2" Water Service & Install Yard Hydrant

• Continue Electrical Work (within Site & inside Electrical Building)

• Continue with Grout Filling / Fillets

• Continue Concrete and Steel Pipe Supports 

• Continue Interior Coatings - Wet Well/Grinder/Influent Concrete Structure

• Begin Pipe Coatings in Meter & Valve Vaults

• Tie-In Injection Quill for Odor Control

Completed Work:

• The second whaler has been installed.

• Temporary power has been installed.

• Installed concrete waler.

• Drove sheeting inside the excavation.

• Excavation of the sheeted hole.

• Backfilled to elevation -11.50

• Installation of Rebar for Wet Well & Channel Grinder Walls

• Form and Pour Slab & Walls for Channel Grinder

• Form and Pour Slab & Walls for Wet Well

• Dewater Wet Well

• Removal of Third Steel Whaler (Bottom)

• Striping Forms

• Installation of the Manhole inside Sheeting

• Testing of Structures

• Back Filling

• Pulled Sheeting

• Top Slab Decking & Rebar Installation

• Installed Vent Piping & Hatches – Wet Well

• Installed Influent Top Slab

• Form & Pour Concrete Slab - Electrical Building

• De-Mob Large Crane

• Excavated & Set Precast Valve Vault

• Excavated & Set Precast Meter Vault

• Form & Pour Baffle Wall

• Installed Slide Gates Inside Influent Structure

• Excavated & Set Two Precast Electrical Handhole Boxes

• Abandonment of Existing Well

• Set Channel Grinder

• Installation of Interior Piping in Wet Well

• Set Precast Electrical Building

• Form & Pour Concrete Pads for Pump Bases

• Set Pumps Inside Wet Well Structure

• Layout / Form / Pour Transformer Pad

• Installation of Misc. Metals (Railings, etc.)

• Re-established Existing Berm (New Trees, Topsoil, Seeding)

• Installation of Vent Piping

• Layout / Form / Pour Generator Pad

• Installation of Interior Valve Vault Piping

• Installed 8" Service Drain Piping

• Installed 16" Force Main (Diesel Bypass) Piping

• Installed Partial 12" Force Main (Diesel Bypass) Piping

• Installed Partial 20" Force Main (Effluent) Piping up to Tie-In Location

• Completed Interior Meter Vault Piping

• Continue 16" Force Main (Influent) Piping up to Tie-In Location

• Pressure Test Installed Yard & Vault Piping 

• 
  

Work scheduled for the month of October:

• Begin Installing 2" Water Service

• Tie-In 10" DIP Discharge Piping (Valve Vault to Wet Well)

• Continue Electrical Work

• Continue with Grout Filling / Fillets

• Continue Concrete Pipe Supports 

• Continue Interior Coatings - Wet Well/Grinder/Influent Concrete Structure

• Begin Pipe Coatings in Meter & Valve Vaults

• Install Injection Quill for Odor Control

Completed Work:

• The second whaler has been installed.

• Temporary power has been installed.

• Installed concrete waler.

• Drove sheeting inside the excavation.

• Excavation of the sheeted hole.

• Backfilled to elevation -11.50

• Installation of Rebar for Wet Well & Channel Grinder Walls

• Form and Pour Slab & Walls for Channel Grinder

• Form and Pour Slab & Walls for Wet Well

• Dewater Wet Well

• Removal of Third Steel Whaler (Bottom)

• Striping Forms

• Installation of the Manhole inside Sheeting

• Testing of Structures

• Back Filling

• Pulled Sheeting

• Top Slab Decking & Rebar Installation

• Installed Vent Piping & Hatches – Wet Well

• Installed Influent Top Slab

• Form & Pour Concrete Slab - Electrical Building

• De-Mob Large Crane

• Excavated & Set Precast Valve Vault

• Excavated & Set Precast Meter Vault

• Form & Pour Baffle Wall

• Installed Slide Gates Inside Influent Structure

• Excavated & Set Two Precast Electrical Handhole Boxes

• Abandonment of Existing Well

• Set Channel Grinder

• Installation of Interior Piping in Wet Well

• Set Precast Electrical Building

• Form & Pour Concrete Pads for Pump Bases

• Set Pumps Inside Wet Well Structure

• Layout / Form / Pour Transformer Pad

• Installation of Misc. Metals (Railings, etc.)

• Re-established Existing Berm (New Trees, Topsoil, Seeding)

• Installation of Vent Piping

• Layout / Form / Pour Generator Pad

• Installation of Interior Valve Vault Piping

• Installed 8" Service Drain Piping

• Installed 16" Force Main (Diesel Bypass) Piping

• Installed Partial 12" Force Main (Diesel Bypass) Piping

• Installed Partial 20" Force Main (Effluent) Piping up to Tie-In Location

• Completed Interior Meter Vault Piping

Work scheduled for the month of September:

• Continue 16" Force Main (Influent) Piping up to Tie-In Location

• Pressure Test Installed Yard & Vault Piping 

• Begin Installing 2" Water Service

• Tie-In 10" DIP Discharge Piping (Valve Vault to Wet Well)

• Continue Electrical Work

• Continue with Grout Filling / Fillets

• Continue Concrete Pipe Supports 

• Continue Interior Coatings - Wet Well/Grinder/Influent Concrete Structure

Completed Work:

• The second whaler has been installed.

• Temporary power has been installed.

• Installed concrete waler.

• Drove sheeting inside the excavation.

• Excavation of the sheeted hole.

• Backfilled to elevation -11.50

• Installation of Rebar for Wet Well & Channel Grinder Walls

• Form and Pour Slab & Walls for Channel Grinder

• Form and Pour Slab & Walls for Wet Well

• Dewater Wet Well

• Removal of Third Steel Whaler (Bottom)

• Striping Forms

• Installation of the Manhole inside Sheeting

• Testing of Structures

• Back Filling

• Pulled Sheeting

• Top Slab Decking & Rebar Installation

• Installed Vent Piping & Hatches – Wet Well

• Installed Influent Top Slab

• Form & Pour Concrete Slab - Electrical Building

• De-Mob Large Crane

• Excavated & Set Precast Valve Vault

• Excavated & Set Precast Meter Vault

• Form & Pour Baffle Wall

• Installed Slide Gates Inside Influent Structure

• Excavated & Set Two Precast Electrical Handhole Boxes

• Abandonment of Existing Well

• Set Channel Grinder

• Installation of Interior Piping in Wet Well

• Set Precast Electrical Building

• Form & Pour Concrete Pads for Pump Bases

• Set Pumps Inside Wet Well Structure

• Layout / Form / Pour Transformer Pad

• Installation of Misc. Metals (Railings, etc.)

• Re-established Existing Berm (New Trees, Topsoil, Seeding)

• Installation of Vent Piping

• Layout / Form / Pour Generator Pad

• Installation of Interior Valve Vault Piping

Work scheduled for the month of August:

• Continue Yard Piping

• Continue Interior Meter Vault Piping

• Continue Electrical Work

• Continue with Grout Filling / Fillets

• Continue Concrete Pipe Supports 

• Continue Interior Coatings - Wet Well/Grinder/Influent Concrete Structure

Completed Work:

• The second whaler has been installed.

• Temporary power has been installed.

• Installed concrete waler.

• Drove sheeting inside the excavation.

• Excavation of the sheeted hole.

• Backfilled to elevation -11.50

• Installation of Rebar for Wet Well & Channel Grinder Walls

• Form and Pour Slab & Walls for Channel Grinder

• Form and Pour Slab & Walls for Wet Well

• Dewater Wet Well

• Removal of Third Steel Whaler (Bottom)

• Striping Forms

• Installation of the Manhole inside Sheeting

• Testing of Structures

• Back Filling

• Pulled Sheeting

• Top Slab Decking & Rebar Installation

• Install Vent Piping & Hatches – Wet Well

• Install Influent Top Slab

• Form & Pour Concrete Slab - Electrical Building

• De-Mob Large Crane

• Excavated & Set Precast Valve Vault

• Excavated & Set Precast Meter Vault

• Form & Pour Baffle Wall

• Installed Slide Gates Inside Influent Structure

• Excavated & Set Two Precast Electrical Handhole Boxes

• Abandonment of Existing Well

• Set Channel Grinder

• Continue Installing Interior Piping in Wet Well

• Set Precast Electrical Building

• Form & Pour Concrete Pads for Pump Bases

• Set Pumps Inside Wet Well Structure

• Layout / Form / Pour Transformer Pad

• Installation of Misc. Metals (Railings, etc.)

• Re-established Existing Berm (New Trees, Topsoil, Seeding)

• Installation of Vent Piping

• Layout / Form / Pour Generator Pad

Work scheduled for the month of July:

• Continue Yard Piping

• Continue Interior Valve & Meter Vault Piping

• Continue Electrical Work

• Continue with Grout Filling / Fillets

• Continue Concrete Pipe Supports 

• Begin Interior Coatings - Wet Well/Grinder/Influent Concrete Structure

Completed Work:

• The second whaler has been installed.

• Temporary power has been installed.

• Installed concrete waler.

• Drove sheeting inside the excavation.

• Excavation of the sheeted hole.

• Backfilled to elevation -11.50

• Installation of Rebar for Wet Well & Channel Grinder Walls

• Form and Pour Slab & Walls for Channel Grinder

• Form and Pour Slab & Walls for Wet Well

• Dewater Wet Well

• Removal of Third Steel Whaler (Bottom)

• Striping Forms

• Installation of the Manhole inside Sheeting

• Testing of Structures

• Back Filling

• Pulled Sheeting

• Top Slab Decking & Rebar Installation

• Install Vent Piping & Hatches – Wet Well

• Install Influent Top Slab

• Form & Pour Concrete Slab - Electrical Building

• De-Mob Large Crane

• Excavated & Set Precast Valve Vault

• Excavated & Set Precast Meter Vault

• Form & Pour Baffle Wall

• Installed Slide Gates Inside Influent Structure

• Excavated & Set Two Precast Electrical Handhole Boxes

• Abandonment of Existing Well

• Set Channel Grinder

• Continue Installing Interior Piping in Wet Well

• Set Precast Electrical Building

• Form & Pour Concrete Pads for Pump Bases

• Set Pumps Inside Wet Well Structure

• Layout / Form / Pour Transformer Pad

• Installation of Misc. Metals (Railings, etc.)

• Re-established Existing Berm (New Trees, Topsoil, Seeding)

• Installation of Vent Piping

Work scheduled for the month of June:

• Continue Yard Piping

• Continue Interior Valve & Meter Vault Piping

• Continue Electrical Work

• Continue with Grout Filling / Fillets

• Concrete Pipe Supports 

• Layout / Form / Pour Generator Pad

• Interior Wet Well Coatings

Completed Work:

• The second whaler has been installed.

• Temporary power has been installed.

• Installed concrete waler.

• Drove sheeting inside the excavation.

• Excavation of the sheeted hole.

• Backfilled to elevation -11.50

• Installation of Rebar for Wet Well & Channel Grinder Walls

• Form and Pour Slab & Walls for Channel Grinder

• Form and Pour Slab & Walls for Wet Well

• Dewater Wet Well

• Removal of Third Steel Whaler (Bottom)

• Striping Forms

• Installation of the Manhole inside Sheeting

• Testing of Structures

• Back Filling

• Pulled Sheeting

• Top Slab Decking & Rebar Installation

• Install Vent Piping & Hatches – Wet Well

• Install Influent Top Slab

• Form & Pour Concrete Slab - Electrical Building

• De-Mob Large Crane

• Excavated & Set Precast Valve Vault

• Excavated & Set Precast Meter Vault

• Form & Pour Baffle Wall

• Installed Slide Gates Inside Influent Structure

• Excavated & Set Two Precast Electrical Handhole Boxes

• Abandonment of Existing Well

• Set Channel Grinder

Work scheduled for the month of May:

• Begin Yard Piping

• Continue Interior Valve & Meter Vault Piping

• Continue Installing Interior Piping in Wet Well

• Install Precast Electrical Building

• Form & Pour Pads for Pump Bases

• Set Pumps Inside Wet Well Structure

• Continue Electrical Work

• Continue with Grout Filling / Fillets

• Layout / Form / Pour Generator Pad

• Layout / Form / Pour Transformer Pad

Completed Work:

• The second whaler has been installed.

• Temporary power has been installed.

• Installed concrete waler.

• Drove sheeting inside the excavation.

• Excavation of the sheeted hole.

• Backfilled to elevation -11.50

• Installation of Rebar for Wet Well & Channel Grinder Walls

• Form and Pour Slab & Walls for Channel Grinder

• Form and Pour Slab & Walls for Wet Well

• Dewater Wet Well

• Removal of Third Steel Whaler (Bottom)

• Striping Forms

• Installation of the Manhole inside Sheeting

• Testing of Structures

• Back Filling

• Pulled Sheeting

• Top Slab Decking & Rebar Installation

• Install Vent Piping & Hatches – Wet Well

• Install Influent Top Slab

• Form & Pour Concrete Slab - Electrical Building

• De-Mob Large Crane

• Excavated & Set Precast Valve Vault

• Excavated & Set Precast Meter Vault

• Form & Pour Baffle Wall

• Installed Slide Gates Inside Influent Structure

• Excavated & Set Two Precast Electrical Handhole Boxes

Work scheduled for the month of April:

• Begin Yard Piping

• Continue Interior Valve & Meter Vault Piping

• Continue Installing Interior Piping in Wet Well

• Install Precast Electrical Building

• Form & Pour Pads for Pump Bases

• Set Pumps Inside Wet Well Structure

• Set Channel Grinder

• Continue Electrical Work

• Abandonment of Existing Well

• Continue with Grout Filling / Fillets

Completed Work:

• The second whaler has been installed.

• Temporary power has been installed.

• Installed concrete waler.

• Drove sheeting inside the excavation.

• Excavation of the sheeted hole.

• Backfilled to elevation -11.50

• Installation of Rebar for Wett Well & Channel Grinder Walls

• Form and Pour Slab & Walls for Channel Grinder

• Form and Pour Slab & Walls for Wet Well

• Dewater Wet Well

• Removal of Third Steel Whaler (Bottom)

•  Striping Forms

• Installation of the Manhole inside Sheeting

• Testing of Structures

• Back Filling

• Pulled Sheeting

Work scheduled for the month of February:

• Continue to Run Dewatering Pumps

• Top Slab Decking & Rebar Installation

• Install Vent Piping & Hatches – Wet Well

• Install Influent Top Slab

• Begin Yard Piping

• Form & Pour Concrete Pads

• De-Mob Large Crane

We have begun pulling sheeting out of the ground! This is a huge milestone as we near the completion of the project.  

Completed Work:

• The second whaler has been installed.

• Temporary power has been installed.

• Installed concrete waler.

• Drove sheeting inside the excavation.

• Excavation of the sheeted hole.

• Backfilled to elevation -11.50

• Installation of Rebar for Wett Well & Channel Grinder Walls

• Form and Pour Slab & Walls for Channel Grinder

• Form and Pour Slab & Walls for Wet Well

• Dewater Wet Well

• Removal of Third Steel Whaler (Bottom)

•  Striping Forms

• Installation of the Manhole inside Sheeting

• Testing of Structures

Work scheduled for the month of January:

• Continue to Run Dewatering Pumps

• Back Filling

• Begin Pulling Sheeting

• Top Slab Decking & Rebar Installation

• Install Vent Piping & Hatches – Wet Well

• Install Influent Top Slab

Completed Work:

• The second whaler has been installed.

• Temporary power has been installed.

• Installed concrete waler.

• Drove sheeting inside the excavation.

• Excavation of the sheeted hole.

• Backfilled to elevation -11.50

• Installation of Rebar for Wett Well & Channel Grinder Walls

• Form and Pour Slab & Walls for Channel Grinder

• Form and Pour Slab & Walls for Wet Well

• Dewater Wet Well

• Removal of Third Steel Whaler (Bottom)

•  Striping Forms

Work scheduled for the month of December:

• Continue to Run Dewatering Pumps

• Installation of the Manhole inside Sheeting

• Testing

• Back Filling

• Begin Pulling Sheeting

Completed Work:

• The second whaler has been installed.

• Temporary power has been installed.

• Installed concrete waler.

• Drove sheeting inside the excavation.

• Excavation of the sheeted hole.

• Backfilled to elevation -11.50

• Installation of Rebar for Wett Well & Channel Grinder Walls

• Form and Pour Slab & Walls for Channel Grinder

• Form and Pour Slab & Walls for Wet Well

• Dewater Wet Well

• Removal of Third Steel Whaler (Bottom)

Work scheduled for the month of November:

• Continue to Run Dewatering Pumps.

• Striping Forms

• Installation of Wet Well Bypass Wall Pipes

• Installation of the Manhole inside Sheeting

• Testing

• Coating

• Back Filling

Completed Work:

• The second whaler has been installed.

• Temporary power has been installed.

• Installed concrete waler.

• Drove sheeting inside the excavation.

• Excavation of the sheeted hole.

• Formed and poured the wet well foundation slab.

• Formed and poured first light of walls for wet well.

• Backfilled to elevation -11.50

• Form and Pour Slab for Channel Grinder

• Form and Pour Second Lift of Wet Well Walls. 

• Dewater Wet Well

• Removal of Third Steel Whaler (Bottom)

Work scheduled for the month of October:

• Continue to Run Dewatering Pumps.

• Installation of Wet Well Bypass Wall Pipes

• Installation of Rebar for Channel Grinder Walls

• Form and Pour First Lift of Wet Well Walls. 

Completed Work:

• The second whaler has been installed.

• Temporary power has been installed.

• Installed concrete waler.

• Drove sheeting inside the excavation.

• Excavation of the sheeted hole.

• Formed and poured the wet well foundation slab.

• Formed and poured first light of walls for wet well.

• Backfilled to elevation -11.50

Work scheduled for the month of September:

• Continue to Run Dewatering Pumps.

• Form and Pour Slab for Channel Grinder

• Form and Pour Second Lift of Wet Well Walls. 

• Dewater Wet Well

• Installation of Pump Discharge Wall Pipes/Sleeves in Wet Well Walls

• Begin Removal of Third Steel Whaler

Completed Work:

• The second whaler has been installed.

• Temporary power has been installed.

• Installed concrete waler.

• Drove sheeting inside the excavation.

Work scheduled for the month of August:

• Continue to excavate the sheeted hole.

• Forming and pouring the foundation slab.

• Forming and pouring walls for pump station wet well.

• Continue to run dewatering pumps

Completed Work:

• The second whaler has been installed.

• Temporary power has been installed. 

Work scheduled for the month of July:

• Installing concrete waler.

• Driving sheeting inside the excavation.

• Excavating the sheeted hole.

• Forming and pouring the foundation slab.

• Forming and pouring walls for pump station wet well.

T. A. Loving Company has finished driving the shoring system and have dug almost 15’ deep inside the cofferdam. A cofferdam is made by driving sheeting in the ground, in this situation the cofferdam is round. Once all the sheeting is in place, we begin excavating the dirt inside the cofferdam and installing whalers. During the next two weeks we will be putting the finishing welds on the braces for the second whaler and excavating the hole to the proper depth for the third whaler. Whalers are used to help support the sheeting as we excavate further into the ground. The first two whalers are made of steel and the third whaler will be made of concrete. We will also be completing the installation of the temporary power with Melton Electric and Duke Energy.  

Please maintain awareness around the site entrance as dump trucks will continue to drive in and out of the site.