Vehicle vibration and NVH analysis for Android
Developed by TallerS
Privacy first
Your vibration measurements and vehicle profiles are processed and stored locally on your device.
Effective date: 28 October 2026
Developer: TallerS
Contact: tallersmk@gmail.com
TallerS respects your privacy. Vibration and NVH Analyzer is designed to perform vehicle vibration and NVH analysis locally on your Android device.
Vibration and NVH Analyzer accesses motion sensor data, including the device accelerometer and/or linear-acceleration sensors, to measure vehicle vibration and calculate vibration frequencies.
This sensor data is processed locally on the device for diagnostic analysis and is not transmitted to TallerS or third parties.
If you grant precise location permission, Guided Analysis uses GPS-derived vehicle speed for rotational-frequency analysis during a user-started diagnostic session.
During an active Guided Analysis session, a foreground service with a visible Android system notification may allow GPS speed measurement and vibration analysis to continue while the application is temporarily minimized or while another application, such as navigation, is displayed.
The active analysis session ends when you press STOP or otherwise end the test.
Vibration and NVH Analyzer does not request Android background-location permission.
Precise location is used only to obtain vehicle speed for analysis. Latitude and longitude are not intentionally stored in diagnostic reports or session logs and are not transmitted to TallerS or third parties.
Location information is processed locally on your device.
You may optionally create vehicle profiles containing technical vehicle information such as:
drivetrain layout
tyre dimensions
final-drive ratios
cylinder count
other technical parameters required for vibration-frequency calculations
Vehicle-profile information is stored locally on your device and is used only for diagnostic calculations and analysis.
When diagnostic sessions are performed or recorded, locally stored information may include:
timestamps
GPS-derived vehicle speed
GPS speed accuracy
sensor sampling information
measured vibration frequencies
vibration amplitudes
diagnostic evidence and analysis scores
calculated rotational frequencies
vehicle-profile information
generated diagnostic reports
Completed Guided Analysis reports may be stored locally on the device so they can be viewed again later.
Raw diagnostic session information may also be stored locally when the relevant recording function is used.
This diagnostic information is not independently transmitted to TallerS or third parties.
Vibration and NVH Analyzer does not require a user account.
The current version of the application contains:
no advertising SDK
no analytics SDK
no cloud account system
no cloud backend
no telemetry system
no third-party tracking system
The application does not request the Android Internet permission and does not independently upload vehicle, diagnostic, sensor or location information to TallerS or third parties.
Purchase processing and application licensing are handled by Google Play.
TallerS does not receive or store your payment card details.
Google may process purchase, payment, account and licensing information independently in accordance with Google's own terms and privacy policies.
This processing is performed by Google Play and is separate from the diagnostic data handled locally by Vibration and NVH Analyzer.
Application settings, vehicle profiles, diagnostic reports and recorded diagnostic information are stored locally on your Android device.
Vibration and NVH Analyzer does not operate a remote server or cloud database for this information.
Android cloud backup is disabled for the application.
Because diagnostic information remains on the device, access to locally stored information is also subject to the security protections of your Android device, including device access controls and Android application-storage protections.
No method of electronic storage can be guaranteed to be completely secure. Users should maintain appropriate security on their device, particularly if diagnostic information is considered sensitive.
Locally stored settings and vehicle profiles remain on the device until they are deleted through application functionality where available, the application's storage is cleared, or the application is uninstalled.
Locally saved reports and diagnostic session data remain on the device until deleted by the user or removed when the application's stored data is cleared or the application is uninstalled, depending on how Android manages the relevant application storage.
TallerS does not maintain a remote copy of this diagnostic information and therefore cannot retrieve or delete locally stored diagnostic data on your behalf.
Depending on the features you choose to use, Vibration and NVH Analyzer may request access to the following device capabilities:
Required to measure vehicle vibration and calculate vibration frequencies.
Used in Guided Analysis to obtain GPS-derived vehicle speed for rotational-frequency analysis.
Location permission is optional for basic vibration measurement and Vibration-only mode.
Features that require correlation between vibration frequency and vehicle speed require GPS access.
Permission can be denied or revoked using Android's application-permission settings. Features requiring that permission may not function while permission is denied.
Vibration and NVH Analyzer does not intentionally transmit or share diagnostic, vehicle-profile, motion-sensor or precise-location information with TallerS or third parties.
The application performs its diagnostic processing locally on the device.
Google Play may independently process information related to purchasing, installation, licensing and operation of the Google Play service according to Google's own privacy policies.
Vibration and NVH Analyzer is an informational diagnostic aid.
Analysis results are based on device sensor measurements, rotational-frequency calculations, GPS-derived speed where applicable, and vehicle information supplied by the user.
A frequency or confidence match does not confirm that a particular vehicle component is defective.
Results can be affected by phone sensors, mounting position, vehicle construction, road conditions, vehicle speed, load and other sources of vibration.
Vehicle inspection, diagnosis and repair should be performed using appropriate procedures, suitable diagnostic equipment and professional judgment.
The application should not be used as the sole basis for deciding that a vehicle is safe to operate or that a particular component requires replacement.
Set up and secure the device before driving.
Do not operate, adjust or read the application while controlling a moving vehicle.
Where interaction with the application is required during a road test, use a passenger or stop the vehicle safely before operating the device.
Do not continue a diagnostic road test if the vehicle exhibits severe vibration, abnormal steering or braking behavior, unusual noise, or any other condition that may make continued operation unsafe.
Always comply with applicable traffic laws and safe-driving practices.
Vibration and NVH Analyzer is a technical automotive diagnostic application and is not designed or specifically directed toward children.
The application does not require user registration and does not intentionally collect personal information from children.
This Privacy Policy may be updated if application functionality, permissions or data-handling practices change.
When significant changes are made, the effective date shown at the top of this policy will be updated.
Users should review this Privacy Policy periodically, particularly after significant application updates.
For privacy questions, application support or other inquiries:
TallerS
Email: tallersmk@gmail.com