Dr. Janne-Wha Wu received the B.S. degree and M.S. degree from the Department of Mechanical Engineering, National Cheng Kung University, Tainan, Taiwan, in 1988 and 1990, respectively. Ph.D. degree was received from the Institute of Electronics, National Chiao Tung University, Shinchu, Taiwan, in 1995.

He worked on the RF power device characterization and RF power amplifier module in Hexawave, Inc. from 1997 to 1999. He joined Advanced Wireless Semiconductor Company in charge of GaAs HBT modeling and reliability analysis from 1999 to 2001. After Advanced Wireless Semiconductor Company, he was responsible for the development and production of handset power amplifier in the component business group of Delta Electronics, Inc. from 2001 to 2005. In 2005, he joins in National Chung Cheng University. Current interests lie within the area of electromagnetic applications and semiconductor technology. The research areas focus on 5G beamformer, UWB radar system, RF/mm-wave CMOS circuits, energy harvesting, device physics and large signal modeling, electromagnetic compatibility and signal integrity of high-speed circuits.

He is a Member of IEEE Microwave Theory and Techniques Society since 2000 and served as chapter chair of IEEE MTT-S Tainan Chapter from 2019 to 2021.

Dr. Yuan-Yao Li received his Ph.D. degree from the Department of Chemical Engineering, University of Bath, UK, in 1998. He was a postdoctoral research associate at the Institute of Industrial Science, University of Tokyo, Japan, from 1998 to 2001.

He joined the Department of Chemical Engineering, National Chung Cheng University (CCU), Taiwan in 2001 as an assistant professor and he is currently a distinguished professor at CCU. In 2018-2019, he was a visiting scholar in the Department of Chemistry at Stanford University, USA. His research interests include carbon nanomaterials, electrocatalysts, metal-ion batteries, metal-air batteries and fuel cell technology.

In his academic years, he published more than 100 SCI papers including the papers in Nature, Nature Communications, Advanced Materials, JACS, PNAS, Chemical Engineering Journal, and so on. He was the associate editor in Journal of the Taiwan Institute of Chemical Engineers in 2013-2018. (2021 Impact Factor: 5.876, Q1 in Chemical Engineering). He received CCU Young Scholar Research Award in 2008, CCU Excellent Research Award in 2015, CCU Best Teaching Award in 2018, CCU Industry-University Collaboration Award in 2017-2019, CCU Outstanding Paper Award in 2021 and CCU Distinguished Professor Award in 2022.

Dr. Yi-Chuang Wu received the B.S. degree from the Department of Mechanical Engineering, National Taiwan University, Taipei, Taiwan, in 2007, the M.S. degree from the Department of Mechanical Engineering, National Taiwan University, Taipei, Taiwan, in 2009, and the Ph.D. degree from the Department of Mechanical Engineering, National Taiwan University, Taipei, Taiwan, in 2018.

He was a Postdoctoral Researcher with National Taiwan University from 2018 to 2019, and then joined the Department of Mechanical Engineering, National Chung Cheng University, Chiayi, Taiwan, where he is currently an Assistant Professor. His current research interests include linear elasticity, solid mechanics, wave propagation, non-destructive testing, piezoelectric materials and piezoelectricity, vibration analysis, theory of plate and shells, composite material, optical measurement.

He was a recipient of the; First Prize award of student’s paper competition of the STAM (Society of Theoretical and Applied Mechanics) of R.O.C. (Taiwan), in 2011, 2013 and 2015; the ; Second Prize award of student’s paper competition of the STAM (Society of Theoretical and Applied Mechanics) of R.O.C. (Taiwan), in 2017; the Best Paper Award of the AASRC (Aeronautical and Astronautical Society of the Republic of China), Taiwan, 2018; First Prize of the doctoral dissertation competition of the STAM (Society of Theoretical and Applied Mechanics) of R.O.C. (Taiwan), 2018.

Dr. Hang-Suin Yang received the B.S. degree from the Department of Aeronautics and Astronautics, National Cheng Kung University, Tainan, Taiwan, in 2009, the M.S. degree from the Department of Aeronautics and Astronautics, National Cheng Kung University, Tainan, Taiwan, in 2001, and the Ph.D. degree from the Department of Aeronautics and Astronautics, National Cheng Kung University, Tainan, Taiwan, in 2015.

He was a Postdoctoral Researcher with National Cheng Kung University from 2015 to 2019, and then joined the Department of Mechanical Engineering, Chung Yuan Christian University, Taoyuan, Taiwan.

In 2019, he joined the Department of Mechanical Engineering, National Chung Cheng University, Chiayi, Taiwan, where he is currently an Assistant Professor. His current research interests include Stirling engine/cryocooler/heat pump, concentrating solar power system, portable cryogenic system, thermoacoustic engine/cryocooler, and application of thermal energy.

He was a recipient of the Outstanding Paper Award from National Chung Cheng University in 2021.

Dr. Yu-Pei Liang is currently an assistant professor at the Department of Computer Science and Information Engineering, National Chung Cheng University since Feb 2022. She received her M.S. and Ph.D. degree in Computer Science from National Tsing Hua University in 2017 and 2020 respectively. Previously, she received her B.S. degree in Computer Science and Information Engineering from National Central University in June 2015. Dr. Liang had been the postdoctoral fellow at the Institute of Information Science at Academia Sinica from June 2020 to Jan 2022, and she was a recipient of Postdoctoral Researcher Academic Research Award from Ministry of Science and Technology (MOST) in 2021.

In the past few years, Dr. Liang has focused on contributing to the performance, reliability, and energy-savings of the storage systems with different types of emerging non-volatile storage mediums, e.g., Phase-change Memory, Flash memory, and Shingled Magnetic Recording Drives. With such fundamental storage system designs, Dr. Liang’s research area later covers design issues of applications, e.g., databases, on top of storage systems. So far, Dr. Liang has published more than ten research papers in IEEE/ACM international conferences and journals. Among these published papers, her journal papers were mainly published (accepted) in the highly-reputable international journals such as IEEE TC, IEEE TCAD, and ACM TECS. Moreover, her conference papers were published in the prestige conferences (e.g., ACM/IEEE DAC, IEEE/ACM ISLPED)

Dr. Boonchana Purahong obtained the B.B.A. degree, M. Eng. degree, and Ph.D. degree from King Mongkut’s Institute of Technology Ladkrabang in 1994, 2006, and 2021.

His academic disciplines with special expertise are Microcontroller, Microprocessor, and Embedded System. He was Head of the research project using income from the Faculty of Engineering for the year 2011 on the application of three-axis sensor technology to exercise. He participated in the research project System, equipment, tools to help measure and evaluate teaching and learning results, source of funds, state budget for the year 2011, and the research project on generating electricity from walking behavior and turning on and off Human Gates, Funding Sources, National Budget, Year 2012.

Dr. Boonchana Purahong is current Chairman of the Information Engineering Program of Department of Computer Engineering, School of Engineering at KMITL.

Dr. Mek Srilomsak obtained Bachelor’s degree in Mechanical Engineering from King Mongkut’s Institute of Technology Ladkrabang, Bangkok (KMITL), Thailand in 2013, Master’s degree in Automotive Engineering from KMITL in 2015 and Mechanical and Control Engineering from Tokyo Institute of Technology (Tokyo Tech), Tokyo, Japan in 2017. In 2020, he obtained Ph.D. degree in Mechanical Engineering from Tokyo Tech.

His research interests include Aerosol emission, Alternative fuel, Automotive technologies, Carbon micro/nanostructures, Diesel/Gasoline Particulate Filter (DPF/GPF) , Engine exhaust emission, Material characterizations, Particulate Matter (PM10 and PM2.5), and Particulate Matter oxidation.

He was a postdoctoral fellow in Tokyo Tech during Oct. 2020 and Feb. 2021 and he is currently a lecturer at the Department of Mechanical Engineering, King Mongkut’s Institute of Technology Ladkrabang, Bangkok, Thailand.

Dr. Napasool Wongvanich obtained B.E. and Ph.D. degree in Electrical and Electronics Engineering from University of Canterbury, Christchurch, New Zealand in 2008 and 2016. After receiving his Ph.D. degree, he came back to Thailand and became a lecturer in King Mongkut’s Institute of Technology Ladkrabang (KMITL), Bangkok. He is currently Assistant Professor at the Department of Instrumentation and Control Engineering in KMITL.

His research and project areas include robotic system and control, process control applications, structural health monitoring, and biomedical and epidemiological systems.

Dr. Santi Wattananusorn obtained B.S. in Chemistry from Kasetsart Universiyt, Thailand in 1991, M. Eng. in Chemical Engineering from Chulalongkorn University, Thailand in 1997. He received the doctorate in 2007 with great honor magna cum laude ( 1.0 ) from the Faculty of Mechanical Engineering, Ruhr-University Bochum, Germany.

His research interests focus in fluid mechanics and transport phenomena.

He is current Assistant professor at Department of Chemical Engineering, School of Engineering, King Mongkut's Institute of Technology Ladkrabang, Thailand.

Dr. Eakarach Bumrungthaichaichan received B. Eng. in Chemical Engineering from King Mongkut’s Institute of Technology Ladkrabang, Thailand in 2010, and M. Eng. from Chulalongkorn University, Thailand in 2012, and D. Eng. from King Mongkut’s Institute of Technology Ladkrabang, Thailand in 2019.

He is Ordinary member in Council of Engineers Thailand. Starting 2014, he is a researcher at Department of Chemical Engineering, School of Engineering, King Mongkut’s Institute of Technology Ladkrabang.

His research interests are jet flow, fluid mixing, supersonic flow, cyclone separator, and CFD modeling and simulation.

Associate Professor Petch Jearanaisilawong obtained his bachelor’s degree in Mechanical Engineering from Brown University, USA in 2002; Master and Doctor of Philosophy of Science in Mechanical Engineering in Massachusetts Institute of Technology, USA in 2008. He is currently Associate Dean for administrative affairs of Faculty of Engineering at KMUTNB.

His specializations are Mechanics of composite and fibrous materials, Finite element method, Mechanical design, and Mechanics of solids at high rate of deformation.

Associate Professor Suwimol Wongsakulphasatch received B.Eng. degree in Chemical Engineering from Khon Kaen University, Thailand, and Ph.D. degree in Chemical Engineering & Analytical Science from The University of Manchester in 2010.

He was a lecture and Assistant Professor at the Department of Chemical Engineering, Silpakorn University, Thailand. Currently, he is Assistant Professor at the Department of Chemical Engineering, King Mongkut’s University of Technology North Bangkok, Thailand.

His research interests include heavy metal adsorption by porous solids, materials and systems for CO2 capture, hydrogen production, colloid and interface science, and molecular Thermodynamics.

Assistant Professor Nophadon Wiwatcharagoses obtained B. Eng. and M. Eng. degree from King Mongkut’s University of Technology North Bangkok, Thailand. In 2012, he obtained Ph.D. degree from Michigan State University, USA.

During 1994 and 2004, he served in Council of Engineering, Thailand, Thai Takenaka International Co., Burke Construction Co., Patamapong Properties Co., and Thai Konoike Construction Co.

He is currently the Chairperson of the Department of Electrical and Computer Engineering, Faculty of Engineering, King Mongkut’s University of Technology North Bangkok.

Dr. Yuenyong Nilsiam is a university lecturer who is interested in open source software & hardware for business and renewable energy, and cloud computing. He is working on projects about smart factory and smart charging station for electric vehicles. He had been working on low-cost open source gas metal arc welding (GMAW) based metal 3-D printing, especially on a slicer and an optimization for steel 3-D printing.

He received his BEng in Computer Enginering from Mahidol University, Thailand, and MECo from Chulalongkorn University, Thailand, and MS in Computer Engineering from Michigan Technological University, USA. In 2017, he obtained Ph.D. degree in Computer Engineering from Michigan Technological University, USA.

Asst.Prof.Dr. Srawouth Chandhaket obtained his bachelor’s degree in Electronic Engineering from Kobe University, Japan in 1995; Master of Science in Electrical Engineering from Virginia Polytechnic Institute and State University, USA in 1998. He came back to Thailand to be a lecturer in Walailak University since then and got a scholarship to pursue his PhD in System Engineering from Yamaguchi University, Japan and fished the degree in 2005.

His research interests are Power Electronics and Control System.

Krit Funsian received the B.Eng. (Second class honor) degree from the Department of Computer Engineering, Prince of Songkla University, Thailand, and M.Eng. degree from the Department of Electrical Engineering, Kasetsart University, Thailand.

He was in Seagate Technology in Thailand and China. He was a lecturer in Walailak University, in Department of Electrical Engineering. After that He moved to be a lecturer in Department of Mechatronics engineering Thaksin University. Three year later, He joined Walailak University for lecturer in Mechanical and Robotic engineering.

He specially interests in signal processing, control system, AI, image processing researching.

Assistant Professor Dr. Anurak Thungtong received his Bachelor's degree in electrical engineering from Walailak University (Thailand) in 2004, M.S. (in 2008) and PhD. (in 2013) in System and Control Engineering from Case Weatern Reserve University (USA). He joined Computer engineering program at Walailak University in 2013 and was appointed as a program chair between 2017-2018. Currently, he is a director of Science and Technology Park responsible for bridging frontier research outputs from academic sector to be implemented in industrial sector.

According to his teaching experience for almost 10 years, he achieved an FHEA Fellowship from Advanced HE (UKPSF) in 2019.

His current research interests is in digital signal processing including physiological and other time series analysis and also system development for signal processing in medical research.

Dr. Attaso Khamwichit received his Bachelor's degree in chemical engineering from Chulalongkorn University (Thailand), an M.S. degree from Michigan Technological University (USA), and a Ph.D. degree in Chemical Engineering from the University of Texas at Austin (USA). He joined the chemical engineering program at Walailak University in 2003. Currently, he is an associate professor in the program.

He was a former head of the chemical engineering department. His teaching experience for over 15 years, both at the undergrad and graduate levels, has continuously contributed to the quality enhancement of education in the chemical engineering program at Walailak University. He has achieved an FHEA Fellowship from Advanced HE (UKPSF) in 2019.

His current research interests include biofuels from biomass, biosorbent, and biomembrane from agricultural and palm oil process wastes.