If you want a simple, foldable headset for playing Switch in a quiet room, choose JLab Neon Folding On-Ear; if you need compact wired earbuds for Switch with a USB-C connector, choose Sudio V3. Both avoid charging, but they suit different ways of listening: JLab gives you padded on-ear cups and a 3.5 mm plug, while Sudio puts lightweight in-ear buds on a cable.
JLab Neon Folding On-Ear vs Sudio V3 at a Glance
• JLab Neon Folding On-Ear: Foldable cups, a 3.5 mm plug, and an in-line mic; trade-off: it is a wired on-ear headset rather than a compact pair of earbuds.
• Sudio V3: Compact USB-C earbuds with a braided cable and IPX4 splash resistance; trade-off: the USB-C connection may not suit a device or setup that needs a 3.5 mm plug.
• JLab’s fit: On-ear cushions, an adjustable headband, and 80-degree rotating cups give it a more substantial headset shape.
• Sudio’s fit: In-ear tips and a 14 g listed weight make it the smaller, lighter-style choice.
• Choose JLab if you want foldable on-ear headphones with a 3.5 mm connection and headset controls.
• Choose Sudio if you want wired earbuds with USB-C, sound isolation, and splash resistance.
The JLab Neon is a wired, on-ear headphone with 40 mm dynamic drivers, a 3.5 mm jack, and a braided nylon cord with an in-line microphone. Its ear cups rotate 80 degrees and fold, so the design can pack down for a bag instead of staying in its full listening shape. A sliding adjustable headband and plush circular cushions offer a more padded fit than an in-ear bud.
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-10-22 · 6 min read · Independent comparison
For Switch, the 3.5 mm plug is the main detail to consider. If your setup accepts that connection, the JLab keeps things simple: plug in, wear the headband, and use the headset’s push-button controls for volume, track changes, or calls. The included mic and controls can also be useful when switching between handheld listening and other compatible devices, though the available facts do not specify every control’s behavior with a Switch.
This is the pick for someone who prefers headphones that sit over the ears, wants folding cups for carrying, or would rather avoid earbuds inside the ear canal. Skip it if you specifically need USB-C earbuds, a splash-resistant design, or the smallest possible listening setup. Its cable also means it is not a wireless option.
Sudio V3 is a wired in-ear pair with a USB-C connector, a built-in microphone, and tactile physical buttons. The earbuds use 10 mm dynamic drivers and an insulating in-ear design intended to reduce sound leakage. At a listed 14 g, they have a much smaller form than a headband-style headset.
The USB-C connector is the first thing to check for a Switch setup. If USB-C is the connection you want to use, these earbuds offer a direct wired format without charging. If your intended setup calls for a 3.5 mm headphone plug instead, the V3’s connector is a mismatch. The product information gives its connection type, but does not establish compatibility across every Switch model or accessory arrangement, so check the port on the device you plan to use.
The V3 fits someone who values a compact in-ear shape, a braided tangle-resistant cable, and IPX4 splash resistance for everyday use. It may be the more practical choice for commuting or carrying in a pocket. Skip it if you dislike in-ear earbuds, want padded on-ear cups, or need a 3.5 mm connection. Although both products have microphones, the Sudio’s call microphone does not make it a wireless gaming headset.
Side-by-Side: Which Should You Choose?
• Best for a 3.5 mm wired connection → JLab Neon Folding On-Ear. It has a 3.5 mm jack; the Sudio uses USB-C.
• Best for a USB-C wired connection → Sudio V3. Its connector is USB-C, so confirm that matches the device and setup you intend to use.
• Best for a small in-ear format → Sudio V3. It is an in-ear design with a listed weight of 14 g.
• Best for splash resistance → Sudio V3. It is specified as IPX4 splash resistant; no corresponding water-resistance rating is provided for the JLab.
• Best for padded on-ear listening → JLab Neon Folding On-Ear. Its plush circular cushions and adjustable band are the appeal if earbuds feel uncomfortable.
• Best for reducing sound leakage through an insulating in-ear fit → Sudio V3. Its design is described as insulating; that is not the same as a stated active noise-cancellation feature.
• Best for a Switch setup where the 3.5 mm port is the intended connection → JLab Neon Folding On-Ear. For a USB-C setup, consider the Sudio only after checking device compatibility.
Neither product is wireless. That matters if your search is for wireless earbuds for Switch: the Sudio V3 is wired despite its compact earbud shape, and the JLab is wired despite its portability. If going cable-free is essential, neither matches that requirement.
Sound specifications alone do not settle the choice. Both list a frequency range of 20 Hz to 20 kHz and use dynamic drivers, but they differ in driver size, fit, and connection. JLab lists 40 mm drivers; Sudio lists 10 mm drivers. Those figures describe different designs, but do not by themselves establish which one will sound better to a particular listener.
The control layouts are also worth weighing. JLab describes headset buttons for volume, skipping tracks, and answering calls, with an in-line mic on the cable. Sudio has tactile physical buttons and a built-in microphone. The available product information does not specify identical control functions or guarantee that each control works the same way with Switch, so treat the controls as a convenience for compatible devices rather than a promised console feature.
My Verdict
For a wired Switch setup, I would choose the JLab Neon Folding On-Ear if my device accepts its 3.5 mm plug. Its folding cups, padded on-ear fit, and headset controls make it the more versatile pick for someone who wants a conventional headset rather than earbuds.
No. Both are wired products. The JLab uses a 3.5 mm plug, while the Sudio V3 uses USB-C.
For a Switch setup using a 3.5 mm headphone connection, I’d choose the JLab. Choose the Sudio only if USB-C is the connection you need and your specific device setup supports it.
Neither product is specified as having active noise cancellation. JLab lists sound isolation, while Sudio describes an insulating in-ear fit intended to reduce sound leakage.
The Sudio V3 is specified as IPX4 splash resistant. The JLab product information does not give a water-resistance rating, so I would not assume it offers the same protection.
• SleepPhones AcousticSheep Classic vs CN-Outlet Wholesale Bulk Eearbuds
• Xmenha Cat Ear Kids vs DR·AMIU Headphone Case
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.