If you want wireless earbuds for everyday listening and vlogging, choose JLab Go Air Pop+; if you need a way to send audio from a 3.5 mm jack to Bluetooth headphones, choose Sudio Flyg.
JLab Go Air Pop+ vs Sudio Flyg at a Glance
• JLab Go Air Pop+ strength: Up to 35+ hours of combined playtime, three EQ options, and a microphone in each earbud. Trade-off: It is an in-ear listening product, not a transmitter for wired audio equipment.
• Sudio Flyg strength: Converts audio from a 3.5 mm headphone jack or dual flight-audio socket into a Bluetooth signal. Trade-off: It is an adapter, not a pair of headphones, and its battery life is up to 12 hours.
• Choose JLab if you want earbuds for calls, music, commuting, or listening while filming with a compatible Bluetooth device.
• Choose Sudio if you already own Bluetooth headphones and need them to work with a device that has a headphone jack but no Bluetooth.
JLab Go Air Pop+ is the straightforward choice if you want actual wireless earbuds. The pair connects over Bluetooth 5.3 and includes MEMS microphones in both earbuds. You can use both together or use either one independently, a practical option for a call when you want one ear free. The case adds charging capacity, bringing the stated combined playtime to 35+ hours: 9+ hours per earbud and 26+ hours from the case.
For vlogging, the built-in microphones make JLab more directly relevant than Flyg if you want earbuds that can handle calls or voice communication with a compatible phone or computer. The spec sheet does not establish how the microphones perform when recording a vlog, though, so I would not treat these as a dedicated creator microphone. Their more grounded appeal is convenience: Bluetooth listening, voice-assistant access, touch controls, and three EQ choices—Signature, Bass Boost, and Balanced. The JLab app can be used to adjust EQ and manage touch controls.
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-10-17 · 7 min read · Independent comparison
The earbuds are 15% smaller than the previous generation and come with three sizes of gel tips. That gives you options for finding a fit, while the IPX4 rating covers sweat and light rain. It is a sensible combination for commutes and workouts, but not a promise of waterproofing. The included case has an integrated USB-C charging cable, and a 10-minute charge is stated to provide an hour of playtime.
Who should skip it: Skip JLab if your main need is to transmit sound from an airplane’s dual 3.5 mm socket or another wired audio source to your existing Bluetooth headphones.
Sudio Flyg is not an earbud set. It is a small Bluetooth audio transmitter, weighing 24 g, that plugs into an audio source with a 3.5 mm headphone jack or a dual 3.5 mm flight-audio socket. It then sends that source’s audio wirelessly to Bluetooth headphones or earbuds you already have. For airline entertainment, portable gaming devices, televisions, computers, and other listed equipment, that solves a different problem from the one JLab solves.
That makes Flyg useful when you want to use your own wireless headphones with a device that only offers a wired output. Its stated Bluetooth range is 10 m, and its battery life is up to 12 hours. It can also be used while charging, which may help on a long trip if you have a suitable charging connection available. The adapter supports stereo or mono audio output, and its setup uses a multifunction button and status indicators.
For vlogging, Flyg is a more specialized choice. It can help send audio from a compatible device’s 3.5 mm output to Bluetooth headphones, but it has no earbuds of its own and the supplied information does not list a microphone. It therefore is not a direct substitute for JLab when you want a pair of earbuds with microphones for calls. Think of it as a bridge between wired audio equipment and wireless headphones—not as a listening set in its own right.
Who should skip it: Skip Flyg if you want a complete pair of earbuds for everyday listening, calls, or recording-related communication.
• Best for a ready-to-use pair of wireless earbuds → JLab Go Air Pop+. It includes two in-ear earbuds, microphones, touch controls, and a charging case.
• Best for turning a headphone jack into Bluetooth audio → Sudio Flyg. It accepts a 3.5 mm input or a dual 3.5 mm flight-audio socket and transmits the sound to compatible Bluetooth headphones.
• Best for longer stated listening time between case charging → JLab Go Air Pop+. Its stated total is 35+ hours, including 9+ hours per earbud and 26+ hours from the case. Flyg’s battery life is up to 12 hours.
• Best for choosing a sound signature → JLab Go Air Pop+. Its EQ3 options are Signature, Bass Boost, and Balanced; Flyg is a transmitter rather than an earbud set with selectable EQ listed in the supplied details.
• Best for keeping one ear free during a call → JLab Go Air Pop+. Either earbud can be used independently, and each has a MEMS microphone.
• Best for airplane seat audio systems → Sudio Flyg. Its dual 3.5 mm flight-audio input is designed for that kind of wired source.
• Best for sweat and light-rain resistance → JLab Go Air Pop+. It has an IPX4 rating; no comparable resistance rating is provided for Flyg.
• Best for a vlogging setup that needs wireless earbuds with microphones → JLab Go Air Pop+. For a setup that only needs to route wired audio to existing Bluetooth headphones, Flyg is the relevant tool instead.
I would choose JLab Go Air Pop+ for most people comparing these products, especially if the goal is everyday listening or a simple vlogging companion with earbuds and built-in microphones. Its battery case, independent-earbud use, EQ options, and IPX4 rating make it the more complete personal-audio option. For vlogging, I would still avoid assuming its earbuds replace a dedicated recording microphone. I would pick Sudio Flyg only when I specifically needed to connect my own Bluetooth headphones to a wired audio source.
Before choosing, check what you need the product to connect to. JLab Go Air Pop+ pairs with Bluetooth devices, including iOS, Android, and PC, while Flyg needs an audio source with a 3.5 mm headphone jack or dual 3.5 mm flight socket and separate Bluetooth headphones to receive the sound. They are not direct substitutes.
Also consider what “for vlogging” means in your setup. If you want earbuds for listening or calls, JLab is the product here with built-in MEMS microphones. The provided details do not describe either product as a dedicated vlog-recording microphone, so don’t infer recording quality from the presence of JLab’s call microphones. If your challenge is monitoring audio from a wired camera, screen, or other source, first confirm that the device has a compatible 3.5 mm output; Flyg’s stated inputs do not establish compatibility with every camera.
Fit and exposure matter, too. JLab includes three gel-tip sizes and has an IPX4 rating for sweat and light rain, which supports workouts or commutes. Flyg has no stated sweat-resistance rating, so I would not choose it as a wearable substitute for earbuds during exercise. If a child will use either product, consider the intended use and fit rather than assuming one is designed specifically for kids; the provided specifications do not give a child-specific fit or safety claim.
If the decision comes down to value, compare what each actually provides rather than treating them as competing earbud models. JLab is the complete listening product. Flyg is an accessory for someone who already owns Bluetooth headphones and needs a wired-to-wireless connection. Check the current price on Amazon before buying, then weigh it against the function you need.
No. JLab Go Air Pop+ is a pair of Bluetooth earbuds with microphones and a charging case. Sudio Flyg is a Bluetooth transmitter that sends audio from a compatible wired source to headphones you supply.
Which is better for vlogging?
Flyg has an input for a dual 3.5 mm flight-audio socket, as well as a standard 3.5 mm headphone jack. It transmits audio to compatible Bluetooth headphones; it does not include headphones.
The earbuds have an IPX4 rating for sweat and light rain resistance. That supports use in those conditions, but it does not mean they are waterproof.
• Behringer POWERPLAY HA8000 vs PreSonus HP60
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.