A clean engine undoubtedly makes repair and maintenance far easier. It is for this reason we recommend that once in a while you must clean your engine before washing your car to ensure that all the dirt and grease get rinsed from the engine as well. Therefore, in this post, we have compiled a step-by-step procedure for giving your car engine a proper clean.
Step1- Prepare the Dirty Engine
Before you even begin cleaning your engine, always remember to remove all the dirty twigs, leaves and other debris from the engine bay. This is because debris can potentially ignite a fire if left on the engine long enough.
Step 2- Disconnect the Battery
First things first, always loosen the bolt on the negative terminal on the battery in a bid to disconnect the battery. This step is specifically important as spraying water directly into the engine can cause the electrical components to blow thus leading to severe damages.
Step 3- Degrease the Engine
In conditions involving p0402 ford, it is usually recommended to degrease the engine. This can be done by spraying the degreaser on the engine from the bottom up. Now, let the degreaser sit on the engine for close to 3-5 minutes before rinsing.
Step 4- Scrub the Stuck Grime
Use a stiff-bristled or steel-toothed brush to scrub away any large deposits of grease, burned oil or grime. However, be cautious of wearing proper eyewear to avoid the grime from getting in your eyes.
Step 5- Rinse the Engine Properly
By now, your degreaser would have loosened up all the stuck grime or dirt. So, wash the complete engine properly but make sure to disconnect all the wires and cover the rest of the electrical components properly to avoid any damages.
Lastly, wash your entire car to prevent any leftover engine degreaser from making any significant damages. So, next time to avoid conditions like p0402 ford, try giving your engine a good wash every few days.