How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-10-05 · 8 min read · Independent comparison
• Sonshine Electronics — biggest strength: a genuinely useful dual-channel A/B switch that flips one 3.5mm source between two outputs (or the reverse), with a mute middle position and ground isolation that helps kill ground-loop hum. Passive, no power, no batteries.
• Sonshine Electronics — biggest trade-off: it's a bare switch box with no cables in the box, so you have to buy the right 3.5mm leads yourself, and it only handles 3.5mm audio — no USB, no wireless, no charging.
• Kytok — biggest strength: a no-drill, no-screw wall mount that holds up to four controllers plus a headset and a small remote shelf, in a two-count pack, which clears a real amount of desk clutter.
• Kytok — biggest trade-off: it's storage, not electronics. It does nothing for sound quality, and it depends on a smooth, clean surface for the adhesive to hold.
• Who Sonshine is for: desktop, streaming, console and headphone-switching setups where you want instant toggling with no signal delay and no software.
• Who Kytok is for: gamers and living-room players who want their pads, cans and remotes off the desk and onto the wall in one organised spot.
This is a small black ABS box — roughly two inches wide and under an inch tall, about the weight of a couple of AA batteries — with a metal switch inside and brass contacts on the jacks. Functionally it does one thing very well: it takes one input and sends it to one of two outputs, or, used in reverse, lets you pick which of two inputs reaches your output. There's also a middle position that mutes everything, which is the kind of detail you don't appreciate until you're mid-call and want silence without touching software.
The part that matters most for the "switch headphones" angle is the TRS/TRRS support. Two, three or four contacts on the plug — it doesn't care. That means a plain stereo headphone cable works, and so does a headset cable with a microphone contact. If you've ever tried to move a headset with a mic between a laptop and a console and had the mic die on one side, this is the compatibility gap it closes. It also works with phones, tablets, computers, gaming devices, headphones and speakers, all over standard 1/8-inch jacks.
Who should buy it: anyone with two audio destinations and one source (or the reverse) who's tired of crawling behind a desk. Desktop rigs, streaming setups, work-from-home desks, and yes — riders who want one fixed audio route instead of swapping cables every time they gear up. Who should skip it: if your gear is USB or Bluetooth, or you want volume control, mixing or multiple inputs at once, this isn't that device. And budget for cables — they aren't included, so measure before you order.
Kytok Controller & Headset: Who It's For
Kytok is solving the opposite problem. It's a wall mount, sold as a two-pack, made from lightweight plastic, and it's aimed at people whose gaming area looks like a cable and controller yard sale. The main unit holds up to four controllers — PS5, PS4, Xbox and Switch Pro pads are all listed as compatible — and adds a dedicated headphone stand plus a small shelf for TV or streaming remotes. It also fits most standard headsets.
Installation is the selling point. There's no drill and no screws: you peel the film off the pre-applied adhesive, line the mount up on a smooth surface — smooth wall, wood panel or glass — and press for a few seconds. There's also a detachable hook, which is a nice bit of flexibility if you want to reconfigure the layout later without re-sticking the whole thing.
So what does it actually give you? Desk and shelf space back, fewer tangled cables, and a fixed spot for every accessory so nothing goes missing between sessions. For a living-room console setup where controllers migrate onto the coffee table, or a bedroom desk where the headset always ends up on the floor, that's a real quality-of-life upgrade. It's also pitched as a gift, and honestly it's the kind of thing a gamer won't buy for themselves but will use every day.
Who should skip it: renters who can't risk adhesive on a finished wall, anyone with textured or painted surfaces that won't take a sticky pad, and anyone expecting it to improve audio in any way. It's a hanger. It holds things. That's the job, and it does it without tools or a warranty headache — Kytok backs it with a year.
Side-by-Side: Which Should You Choose?
• Best for a mic-equipped headset → Sonshine Electronics Two channel Audio. Four-contact TRRS plugs are explicitly supported, so the mic path survives the switch.
• Best for killing ground-loop hum → Sonshine Electronics Two channel Audio. It switches and isolates the ground channel, which is the usual culprit.
• Best for zero-latency, zero-power operation → Sonshine Electronics Two channel Audio. Passive design, no batteries, no delay.
• Best for decluttering a gaming space → Kytok Controller & Headset. Four controllers, a headset and remotes, all off the desk.
• Best for renters and tool-free setup → Kytok Controller & Headset. No-drill adhesive mounting with a detachable hook.
• Best for a two-person or multi-console household → Kytok Controller & Headset. It ships as a two-pack, so two walls or two rooms get covered.
• Best if your problem is sound routing, not mess → Sonshine Electronics Two channel Audio. And the reverse is just as true: if your problem is mess, not sound, the switch box won't help you at all.
For the motorcycle use case I'd start with the Sonshine Electronics Two channel Audio. Riders don't need more places to hang things — they need one reliable audio path they can lock in and forget, and a passive switch that flips cleanly between a headset and a speaker without unplugging anything is the more useful tool in a helmet-and-gloves world. In my opinion it's also the smarter first purchase for anyone who's specifically trying to switch headphones between a PC, a console and speakers, because it solves the routing problem permanently and costs you nothing in latency or setup.
The Kytok mount is the better buy only if your actual pain is clutter. If controllers and a headset are living on your desk and it's driving you mad, buy the Kytok. If your pain is "I keep swapping cables," buy the Sonshine. They're not competitors so much as two different answers to two different questions — but if you forced me to pick one for a rider or a headphone-switcher, it's the switch box. Check the current price on Amazon before you commit to either.
how to switch headphones left right
That's a balance/stereo setting inside your device or app, not a hardware job — a two-channel A/B switch like the Sonshine unit routes a whole stereo signal from one output to another, it doesn't split left and right. Use your OS or game audio settings for left/right balance. The Sonshine box is the right tool when you want to move the entire signal to a different destination.
how to switch headphones between devices
With a passive A/B switch, you connect your two devices (or two outputs) to the box and flip the selector — no unplugging, no re-pairing, no software. The Sonshine Electronics unit does exactly this over 3.5mm, and because it supports both TRS and TRRS plugs, a headset with a mic works too. Bluetooth and USB headphones can't be switched this way; those need their own pairing or device menu.
how to switch headphones to headset windows 11
If both are 3.5mm, put them on the two outputs of the switch and toggle between them — Windows 11 keeps seeing the same audio device, so nothing in Settings needs to change. If your headset is USB or wireless, Windows 11 handles it in Settings under System, Sound, where you pick the output device. The passive switch is the cleaner option when you're flipping back and forth constantly.
how to switch headphones to speakers on computer
Route your computer's 3.5mm output into the switch, plug headphones into one output and speakers into the other, then flip between them — or use the middle position to mute both. That's the classic desktop use for a two-channel switcher, and it avoids digging through Windows sound settings every time. Just remember the Sonshine box doesn't include cables, so buy the right lengths for your desk.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: FIFINE Gaming Audio Mixer vs VCOM USB Microphone, LUDOS Clamor vs Yunsailing 10: Small on Ear Headphones, LICAEVEY Retractable vs HiHiniu Earpiece V5.3, how Kinobo Neckband compares to HAOYUYAN Earbuds