How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want a wired, zero-latency way to switch headphones, speakers or a mic-equipped headset between two devices, choose Sonshine Electronics Two channel Audio; if you need one wireless headset to actually listen on — with a boom mic and long battery life for PS5, PC, Switch or mobile — choose SKAPENDY Gaming Headset. They share a keyword and almost nothing else: one is a passive switch box, the other is a complete gaming headset.
• Sonshine Electronics Two channel Audio — biggest strength: a dual-channel A/B switch that toggles between two audio sources or two outputs over 3.5mm, with full TRS and TRRS support and a mute position in the middle.
• Sonshine Electronics Two channel Audio — biggest trade-off: it makes no sound of its own and ships without cables, so you have to supply your own 3.5mm cables and the gear on both ends.
• SKAPENDY Gaming Headset — biggest strength: a complete wireless headset with 2.4GHz and Bluetooth, 50mm drivers, an ENC boom mic and up to 50 hours of playtime.
• SKAPENDY Gaming Headset — biggest trade-off: it is wireless-only with no 3.5mm jack, so it cannot plug into a wired switch box, an older controller or a plain aux port.
• Who each pick is for: the Sonshine box suits desk setups juggling multiple sources or outputs; the SKAPENDY suits players who want one headset for gaming, chat and music across several devices.
This is not a headset. It is a small black ABS box — roughly 50mm x 35mm x 24mm and 24 grams — with a metal switch and 3.5mm jacks. Its whole job is routing: take one input and send it to either of two outputs, or flip it around and choose which of two inputs reaches your single output. The middle position mutes everything, which is a genuinely handy detail when you want to kill audio without unplugging anything.
What it does best is solve the "too many things, one set of speakers" problem. Run your PC into it and switch between desktop speakers and a headset. Or run two sources — a console and a laptop — and pick which one hits your speakers. Because it works with any 3.5mm plug carrying two, three or four contacts, it handles plain stereo headphones and TRRS headsets with a mic. The jacks use brass contacts to resist corrosion, and it needs no power at all, so there is no battery to charge and no delay when you flip the switch.
Who should buy it: desk workers, streamers, gamers and work-from-home folks who own good headphones or speakers already and just want to move audio around without crawling behind a PC. Who should skip it: anyone who wants a headset with a microphone and drivers — this box has neither, and the audio cables are not included, so budget for those separately.
SKAPENDY Gaming Headset: Who It's For
The SKAPENDY VK81 is the opposite kind of product: a self-contained over-ear wireless headset that makes the sound itself. It runs on a 1200mAh battery rated for up to 50 hours of active play, connects over either 2.4GHz or Bluetooth 5, and covers PS5, PS4, PC, Switch, Mac and mobile. There is no 3.5mm jack — it is wireless only — so everything happens through that dongle or a Bluetooth pairing.
The headline spec for competitive players is the sub-20ms latency in its 2.4GHz game mode. The sheet frames that against the 40ms-plus delay typical of plain Bluetooth headsets, and in fast FPS titles that gap is the difference between hearing a footstep as it happens and hearing it a beat late. The 50mm titanium-coated drivers and 3D surround processing are tuned to push directional cues forward, which matters more in shooters than in music.
The mic is the other half of the story. The dual-beamforming ENC array is designed to strip out background noise like keyboard clatter, and the boom is both 360-degree rotatable and detachable — so it disappears when you just want headphones for music or a commute. Comfort is handled with a suspension-style headband and breathable memory-foam earcups at about 12oz, and the sheet specifically calls out glasses wearers, since the suspension design spreads weight instead of clamping.
Who should buy it: players who want one headset for squad chat, solo campaigns and music across multiple devices, especially if they wear glasses or sit through long sessions. Who should skip it: anyone who needs a wired connection, a passive switch, or a headset that will work with a device that only offers an aux jack.
• Best for switching between two sources or outputs → Sonshine Electronics Two channel Audio. That is literally its entire function.
• Best for battery life → SKAPENDY Gaming Headset, rated for up to 50 hours, versus the Sonshine box needing no power at all.
• Best for gaming voice chat → SKAPENDY Gaming Headset with its detachable ENC boom mic.
• Best for fixing ground-loop hum → Sonshine Electronics Two channel Audio, thanks to its ground-isolating switch.
• Best for a silent mute button → Sonshine Electronics Two channel Audio, which mutes in the middle switch position with no software involved.
• Best for competitive FPS timing → SKAPENDY Gaming Headset and its sub-20ms 2.4GHz mode.
• Best for using your own existing headphones or speakers → Sonshine Electronics Two channel Audio, since it works with any standard 3.5mm gear.
• Best for long sessions and glasses wearers → SKAPENDY Gaming Headset, with its suspension headband and memory-foam earcups.
• Best for a wired-only or offline setup → Sonshine Electronics Two channel Audio, which never needs charging or pairing.
In my opinion, these two should not actually be competing for the same slot in your cart — but if I had to pick one, I would buy the Sonshine Electronics Two channel Audio switch. It is the more useful object for the money in a typical desk setup: it fixes a real, recurring annoyance, needs no charging, and works with gear you already own. I would only flip that recommendation if you do not own a decent headset yet. In that case the SKAPENDY Gaming Headset is the smarter single purchase, because it gives you the drivers, the mic and the wireless freedom in one box — just check the current price on Amazon before deciding, since value is the one thing specs cannot tell you.
FAQ
Neither product has a left/right channel swap feature. The Sonshine box switches between two channels of audio — meaning two sources or outputs — not between your left and right ears. On the SKAPENDY, left and right are fixed by the over-ear design.
This is a Windows setting, not a hardware one. Open Settings, then System, then Sound, and choose your output device from the list. If you are using the Sonshine box, Windows will see whichever device is routed through the switch; if you are using the SKAPENDY, select it as the output and input once it is paired.
The Sonshine Electronics Two channel Audio switch is built for exactly this: plug your computer into the input and your speakers and headphones into the two outputs, then flip between them — or use the middle position to mute both. Windows can also switch outputs in software, but the box does it without touching a menu.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: Sony WH-CH720 vs Avantree Resolve -3.5mm, Binineew Earbuds vs Gennice Hi-Fi: HIFI Stereo Earbuds, ZOHAN EM030 vs TECKNET Trucker: Noise Cancelling Headphones, LORELEI B-C6 vs YOCOWOCO Adapter