Solar Panel Cleaning Service

Solar Cleaning &Maintenance Package

1 Monthtly Package

2 Yearly Package

3 AMC

4 Charge base Service

Our Methods &Techniques for ON-Grid Solar Cleaning , O&M SOP

Water Quality

Water Quality : The quality of water is crucial when cleaning solar modules.High mineral content water may cause mineral deposits on the glass surface, reducing the module's performance.Water must be free from grit and physical contaminants that could damage the panel surface. Use deionized, or reverse osmosis and natural pH water to prevent mineral deposits. If RO is not available, rainwater or tap water with low mineral

Use deionized or distilled Water if possible As hard water leaves Mineral Deposits

Temp, Solar Irradiance Air Mass

Water temperature

The temperature of water used for cleaning should be the same as the ambient temperature at the time of cleaning.

Cleaning should be carried out when the modules are cool, to avoid thermal shock which can potentially cause cracks on the modules.

Tools & Equiment

Use Soft -brisled brushes Sponges Microfiber Cloths Or Specialized Soft-Foam Squeegees

Wet Cleaning: Clean solar panels help ensure solar installations generate optimal electricity. All panels have been designed for easy installation and minimal maintenance, however, dust, pollen, leaves and other contaminants often find their way onto the panel and soil the surface. So we will discuss now in detail how can we clean the module to get the best efficiency.

Pressure Motor & Advance Tool

In this cleaning method, water is used to eliminate dirt from the surface of the solar PV module. The cleaning process is Manual. Manual cleaning uses a soft cloth, brush, detergent (non-abrasive) and clean water

Drying the modules: After rinsing the modules, use a squeegee or a lint-free cloth to remove excess water from the surface. Let the modules air dry completely before reconnecting them

Dusting of other Equipment &Dry Cleaning

Remove loose dirt leaves And debris With A dry Soft Brush Or Cloth

Modules should be dried after rinsing using a soft sponge or rubber wiper with a plastic frame on an extension pole.Wipe the module surface from top to bottom to remove any residual water from the module.

Safety Wear

Safety: Safety Precautions: Before starting any cleaning activity, ensure to take necessary safety precautions to avoid any hazards. Wear protective equipment, such as gloves and safety glasses.

Wear Insulating Gloves And Non Slip Footwear. ater is a powerful polar solvent that removes dirt without damaging surfaces.

Equipment Preparation:

Before cleaning the modules, ensure that all the cleaning equipment, including brushes, sponges, and squeegees, are clean and free of dirt, debris, and other contaminants. Don't use metal objects or harsh abrasive products for removing caked on materials scratching the glass on a solar panel can affect its performance as scratches will cast shadows.

Guidelines ON-Grid Solar Cleaning ,O&M SOP