It has been noted that solar panels for homes can be utilized to minimize reliance on the grid and save money in the long run. However, placing solar panels can be crucial to achieving optimum efficiency, as is normally seen in this invention. This is seen from the orientation and the tilt since they affect the amount of shading, while roof space affects the size of the array that can be installed.

Based on the guidelines in this blog, one can find out which configuration is best suited for residential Solar panel installation in Los Angeles.

Check the Pitch and Direction of a Roof

●      The angle and slope of the roof are some of the most important things that will help you get the most out of your solar. The Northern Hemisphere’s roofs receive the most direct sunlight on south-facing roofs.

●      Solar panels should be installed tilted to the latitude of the location so that they face the sun directly at noon when irradiance is at its highest.

●      If it is impossible to install this angle due to the roof pitch, tilt panels should be as close as possible to the pitch as possible.

●      It is recommended to get an east/west-facing roof if a south-facing roof is not feasible. Any light during the day, whether in the morning or afternoon, is better than no light at all.

Evaluate Shading Elements

●      Shading has been found to be the largest cause of loss of solar production, cutting generation by as much as 25 percent if only 10 percent of panels are shaded.

●      Continuously watch and take detailed notes of the shading components such as trees, chimneys, and other buildings throughout the day and year.

●      You can do a solar shading audit or on-site solar survey to establish shading effects.

●      Remove problematic trees or use a different roof area where there is heavy shadow formation.

Maximize Your Module Layout

●      When you have discovered the roofs with the most favorable conditions for solar power generation, ensure that you utilize every available surface area.

●      Introduce module layout designs and use microinverters to enhance maximum output depending on your roof configuration and tilt.

●      Install solar panels both vertically on the roof surface as well as horizontally on the roof to improve space utilization.

Monitor Production

●      Lastly, after having installed the system, management should occasionally monitor its production by using software to determine the best output.

●      Assess output for seasons and their corresponding weather against expected levels of output.

●      To request changes if underperforming, use data showing slower performances, such as angles or low utilization of panels.

The Final Word

So, identifying the right position for placing the solar panels is critical to ensuring your system will function effectively in the coming years. By adhering to these guidelines for solar panel installation in Kern County, you will get out every ounce of free energy from the sunlight received by your piece of land.

It is always important to take the time and do the math to get the best of the opportunities and make the best use of the space for the money to be worth it. If you have chosen the right place to install the solar panels, then you are halfway to paying less for your electricity bill.