A solar charge controller(for example: RENOGY 20 AMP MPPT SOLAR CHARGE CONTROLLER ) is an essential part of every solar charging kit. The main role of a controller is to protect and automate the charging of the battery. It does this in several ways:
A brilliant little device that boasts compatibility, simplicity, and a utilitarian understanding of solar panels, batteries, and loads: it is included in most of our small and medium sized kits.
As it uses PWM technology, the amount of current and voltage that is lost between the panel and the battery is reduced to next to nothing. It can prolong battery life and also protect it from overcharging, undercharging, short circuiting, and overheating.
This charge controller does not have to be used solely on one panel and one battery; a 10A PWM controller cab be used to regulate the charge of an array of solar panels connected in parallel with a total power of 160W. If you were to get a 20A PWM controller, you would be able to regulate a solar panel bank of up to 320W for 12V batteries, and 640W for 24V batteries.The PWM controller can also be used to connect solar panels to a battery bank of 12V batteries, provided that the batteries are the same size and that they are in good condition. The 10A controller is also conveniently compact, at only 14 x 7 cm.
The programmable features allow the user to customise the charging process by setting the battery type and the capacity, choosing charging voltages at each stage, setting protection parameters, and by switching the load on and off by timer.
These controllers put the power in the owner’s hands, and makes a solar circuit much more advanced and controllable. An LCD display gives you information about many things, including:
-the solar panel current/voltage,the battery current/voltage
-the state of charge of the battery
-the temperature
-current charging stage