System Materials Processing Lab

Publications

[1] Y.S. Song, J.R. Youn, “Friction and wear property of carbon fiber reinforced epoxy composite for biomimetic applications,” Journal of the Korean fiber society, vol. 37, no. 3, pp 144, 2000.

[2] Y.S. Song, K. Chung, T.J. Kang, and J.R. Youn, “Prediction of permeability tensor for plain woven fabric by using control volume finite element method,” Polymers and polymer composites, vol. 11, no. 6, pp 465, 2003.

[3] Y.K. Cho, Y.S. Song, T.J. Kang, K. Chung, and J.R. Youn, “Permeability measurement of a circular braided preform for resin transfer molding,” Fibers and Polymers, vol. 4, no. 3, pp 135, 2003.

[4] Y.S. Song, J.R. Youn, “Prediction of permeability for three dimensional circular braided preform,” SME ICCM-14, technical paper, TP03PUB318, 2003.

[5] Y.S. Song, K. Chung, T.J. Kang, and J.R. Youn, “Prediction of permeability tensor for three dimensional circular braided preform by applying a finite volume method to a unit cell,” Composites science and technology, vol. 64, pp 1629, 2004.

[6] Y.S. Song, J.R. Youn, “Properties of epoxy nanocomposites filled with carbon nanomaterials,” e-Polymers, 80, 2004.

[7] Y.S. Song, J.R. Youn, “Modeling of rheological behavior of nanocomposites by Brownian dynamics simulation,” Korea-Australia Rheology, vol. 16, pp 201, 2004.

[8] Y.S. Song, K. Chung, T.J. Kang, and J.R. Youn, “Numerical prediction of permeability tensor for three dimensional circular braided preform by considering intra-tow flow,” Polymers and polymer composites, vol. 13, pp 323, 2005.

[9] Y.S. Song, J.R. Youn, “Influence of dispersion states of carbon nanotubes in the nanocomposites,” Carbon, vol. 43, pp 1378, 2005.

¨ Selected as one of top 10 cited papers in the Journal Carbon (citation number 900):

http://www.elsevier.com/wps/find/journaldescription.cws_home/258/description#description

[10] Y.S. Song, J.R. Youn, “Evaluation of effective thermal conductivity for carbon nanotube/polymer composites using control volume finite element method,” Carbon, vol. 44, pp 710, 2006.

[11] Y.S. Song, T. Jeong, “Thermal characteristics and measurement of nanoscale materials,” LNCS, No. 3393, pp 105, 2006.

[12] Y.S. Song, “Effect of surface treatment for carbon nanotubes on morphological and rheological properties of poly(ethylene oxide) nanocomposites,” Polymer Engineering and Science, vol. 46, pp 1350, 2006.

[13] Y.S. Song, “Mathematical analysis of resin flow through fibrous porous media,” Applied Composite Materials, vol. 13, pp 335, 2006.

[14] Y.S. Song, T. Jeong, “Computational analysis and simulation of vacuum infusion molding process,” LNCS, No. 3393, pp 113, 2006.

[15] Y.S. Song, “Characterization of mold filling in vacuum infusion process,” Advanced Composites Letters, vol. 15, pp 61, 2006.

[16] Y.S. Song, J.R. Youn, “Asymptotic expansion homogenization of permeability tensor for plain woven fabrics,” Composites Part A, vol. 37, pp 2080, 2006.

[17] Y.S. Song, J.R. Youn, “Modeling of effective elastic properties for polymer based carbon nanotube composites,” Polymer, vol. 47, pp 1741, 2006.

[18] Y.S. Song, “Rheological characterization of carbon nanotubes/poly(ethylene oxide) compoistes,” Rheologica Acta, vol. 46, pp 250, 2006.

[19] K.S. Shin, Y.S. Song, and J.R. Youn, “Radial flow advancement in multi-layered preform for resin transfer molding,” Korea-Australia Rheology Journal, vol. 18, pp 217, 2006.

[20] Y.S. Song, J.R. Youn, “Flow advancement through multi-layered preform with sandwich structure,” Composites Part A, vol. 38, pp 1082, 2007.

[21] Y.S. Song, “Multiscale fiber reinforced composites prepared by vacuum assisted resin transfer molding,” Polymer Composites, vol. 28, pp 458-461, 2007.

[22] H.S. Chae, Y.S. Song, and J.R. Youn, “Transverse permeability measurement of a circular braided preform in liquid composite molding,” Korea-Australia Rheology Journal, vol. 19, pp 17, 2007.

[23] Y.S. Song, “Residual stress and rheological behavior of polymeric nanocomposites,” e-polymers, no. 47, 2007.

[24] Y.S. Song, J.R. Youn, “Modeling of resin infusion in vacuum assisted resin transfer molding,” Polymer Composites, vol. 29, pp 39, 2008.

[25] Y.S. Song, H.J. Oh, T.T. Jeong, J.R. Youn, “A novel manufacturing method for carbon nanotube/aramid fiber filled hybrid multi-component composites,” Advanced Composite Materials, vol. 17, pp 333, 2008.

[26] C. Niggemann, Y.S. Song, J.W. Gillespie, D. Heider, “Experimental investigation of the controlled atmospheric pressure resin infusion (CAPRI) process,” Journal of Composite Materials, vol. 42, pp 1049, 2008.

[27] Y.S. Song, J.R. Youn, “Numerical investigation on flow through porous media in the post-infusion process,” Polymer Composites, vol. 30, pp 1125, 2009.

[28] Y.S. Song, D. Heider, J.R. Youn, “Statistical characteristics of out-of-plane permeability for plain woven structure,” Polymer Composites, vol. 30, pp 1465-1472, 2009.

[29] Y.S. Song, S. Moon, L. Hulli, S.K. Hasan, E. Kayaalp, U. Demirci, “Microfluidics for cryopreservation,” Lab on a Chip, vol. 9, pp 1874, 2009.

         highlighted in the magazine Chemical Technology:

       http://www.rsc.org/Publishing/ChemTech/Volume/2009/06/microfluidics_shock.asp

[30] Y.S. Song, J.R. Youn, T.G. Gutowski, “Life cycle energy analysis of fiber-reinforced composites,” Composites Part A, vol. 40, pp 1257, 2009.

[31] Y.S. Song, H. Brenner, “Multiscale analysis of thermal field flow fractionation through macrotransport approach,” Journal of Chemical Physics, vol. 131, pp 044907, 2009.

[32] H.J. Oh, Y.S. Song, S.H. Lee, J.R. Youn, “Development of warpage and residual stresses in film insert molded parts,” Polymer Engineering and Science, vol. 49, pp 1389, 2009.

[33] Y.S. Song, R.L. Lin, G. Montesano, N.G. Durmus, G. Lee, S.S. Yoo, E. Kayaalp, E. Haeggstrom, A. Khademhosseini, U. Demirci, “Engineered 3D tissue models for cell-laden microfluidic channels,” Analytical and Bioanalytical Chemistry, vol. 395, pp 185, 2009.

[34] S.H. Lee, M. Yang, Y.S. Song, S.Y. Kim, J.R. Youn, “Three-dimensional flow simulation of resin transfer molding utilizing multilayered fiber perform,” Journal of Applied Polymer Science, vol. 114, pp 1803, 2009.

[35] S. Moon, S.K. Hasan, Y.S. Song, H.O. Keles, F. Manzur, S. Mikkilineni, J. Hong, J. Nagatomi, E. Haggstrom, A. Khademhosseini, U. Demirci, “Layer by layer 3D tissue epitaxy by cell-laden hydrogel droplets,” Tissue Engineering: Part C, vol. 16, pp 157-166, 2010.

[36] Y.S. Song, H. Brenner, “Dispersion phenomena in helical flow in a concentric annulus,” Journal of Chemical Physics, vol. 131, pp 224108, 2009.

[37] F. Xu, S. Moon, X. Zhang, L. Shao, U. Demirci, Y.S. Song, “Multiscale heat and mass transfer modeling of cell and tissue cryopreservation,” Philosophical Transactions of the Royal Society A, vol. 368, 1, 2010.

[38] F. Xu, S. Moon, A.E. Emre, E.S. Turali, Y.S. Song, A. Hacking, J. Nagatomi, U. Demirci, U., “A Droplet based building block approach for bladder smooth muscle cell (SMC) proliferation,”  Biofabrication, vol. 2, pp 014105, 2010.

[39] Y.S. Song, D. Alder, F. Xu, E. Kayaalp, A. Nureddin, R.M. Anchan, R.L. Maas, U. Demirci, “Vitrification and levitation of a liquid droplet on liquid nitrogen,” PNAS, vol. 107, pp 4596-600, 2010.

¨ Appeared in the Chosun Daily and the Postech Magazine in Korea:

http://news.chosun.com/site/data/html_dir/2010/03/01/2010030101090.html

http://bric.postech.ac.kr/myboard/read.php?Board=hbs_treatise&id=15565&ttype=0&idauthorid=8226

[40] J.T. Lee, M.W. Kim, Y.S. Song, T.J. Kang, J.R. Youn, “Mechanical properties of denim fabric reinforced poly(lactic acid),” Fibers and Polymers, vol. 11, pp 60-66, 2010.

[41] H. Jabbar, Y.S. Song, T.T. Jeong, “RF energy harvesting system and circuits for charging of mobile devices,” IEEE Transaction on Consumer Electronics, vol. 56, pp 247-253, 2010.

[42] S.H. Lee, J.H. Han, S.Y. Kim, J.R. Youn, Y.S. Song, “Compression and relaxation behavior of dry fiber preforms for resin transfer molding,” Journal of Composite Materials, vol. 44, pp 1801-1820, 2010.

[43] M.W. Kim, Y.S. Song, J.R. Youn, “Effects of interfacial adhesion and crystallization on the thermoresistance of poly(lactic acid)/mica composites,” Composites: part A, vol. 41, pp 1817-1822, 2010.

[44] J.Y. Kim, S.Y. Kim, J.R. Youn, Y.S. Song, “Relationship between Crystallization Behavior and Warpage of Film Insert Molded Parts," Journal of Applied Polymer Science, vol. 120, pp 1539-1546, 2011.

[45] T. Jeong, H.O. Kim, Y.C. Oh, Y.S. Song, S. Rhee, “Mobility Model of People on Requirement-Based Design in Mobile Wireless Network,” Journal of Internet Technology, vol. 12, pp 717-724, 2011.

[46] H.J. Oh, Y.S. Song, S.H. Kim, S.Y. Kim, J.R. Youn, “Fluid-structure interaction analysis on the film wrinkling problem of a complicated film insert molded part,” Polymer Engineering and Science, vol. 51, pp 812-818, 2011.

[47] I.H. Sul, J.R. Youn, Y.S. Song, “Quantitative dispersion evaluation of carbon nanotubes using a new analysis protocol,” Carbon, vol. 49, pp 1473-1478, 2011.

[48] J. Samot, S.J. Moon, L. Shao, X. Xiaohui, F. Xu, Y.S. Song, H.O. Keles, L. Matloff, J. Markel, U. Demirci, ‘‘Blood banking in living droplets,’’ PLoS ONE, vol. 6(3), e17530, 2011.

[49] H.J. Oh, J.H. Park, S.J. Lee, B.I. Kim, J.R. Youn, Y.S. Song, ‘‘Sustainable fabrication of microstructured lab-on-a-chip,’’ Lab on a Chip, vol. 11, pp 3999-4005, 2011.

[50] J.Y. Jang, T.K. Jeong, H.J. Oh, J.R. Youn, Y.S. Song, ‘‘Thermal stability and flammability of coconut fiber reinforced poly(lactic acid) composites,’’ Composites Part B, vol. 43, pp 2434-2438, 2012.

[51] D.J. Lee, H.J. Oh, J.R. Youn, Y.S. Song, ‘‘Analysis of effective elastic modulus for multiphased hybrid composites,’’ Composites Science and Technology, vol. 72, pp 278-283, 2012.

[52] Y.S. Song, J.T. Lee, D.S. Ji, M.W. Kim, S.H. Lee, J.R. Youn,‘‘Viscoelastic and thermal behavior of woven hemp fiber reinforced poly(lactic acid) composites,’’ Composites Part B, vol. 43, pp 856-860, 2012.

[53] Y.S. Song, ‘‘A passive microfluidic valve fabricated from a hydrogel filled with carbon nanotubes,’’ Carbon, vol. 50, pp 1417-1421, 2012.

[54] I.H. Sul, J.R. Youn, Y.S. Song, ‘‘Bubble development in a polymeric resin under vacuum,’’ Polymer Engineering and Science, vol. 52, pp 1733-1739, 2012.

[55] D.J. Lee, K.Y. Cho, S. Jang, J.R. Youn, Y.S. Song, “Liquid slip on a nanostructured surface,” Langmuir, vol. 28, pp 10488-10494, 2012.

[56] J.R. Youn, Y.S. Song, “Cell-encapsulating droplet formation and freezing,” Appl. Phys. Lett., vol. 101, pp 133707, 2012.

[57] D.J. Lee, H.M. Kim, J.R. Youn, Y.S. Song, “Water droplet bouncing and superhydrophobicity induced by multiscale hierarchical nanostructures,” ACS Nano, vol. 6, pp 7656-7664, 2012.

[58] J.R. Youn, Y.S. Song, “Vitrification and devitrification of micro-droplets,” J. Micromech. Microeng., vol. 22, pp 115018, 2012.

[59] D.H. Kim, H.J. Kang, Y.S. Song, “Rheological and thermal characteristics of three-phase eco-composites,” Carbohydrate Polymers, vol. 92, pp 1006-1011, 2013.

 [60] K.Y. Cho, Y.I. Kwon, J.R. Youn, Y.S. Song, “Interaction analysis between binder and particles in multiphase slurries,” Analyst, vol. 138, pp 2044-2050, 2013.

[61] S.H. Kim, I.H. Sul, J.J. Jeong, J.R. Youn, Y.S. Song, “Robust fabrication and evaluation of  nanopattern insert molded parts,”

 European Polymer Journal, vol. 49, pp 1437-1445, 2013.

[62] I.H. Sul, Y.S. Song, “Characterization of silica/PET anti-glare films using image analysis and dynamic dispersity index,” Journal of Applied Polymer Science, vol. 129, pp 3518-3526, 2013.

[63] S.J. Bai, Y.S. Song, “Correlation between internal structure and electrochemical impedance spectroscopy of multiphase slurry systems,” Anal Chem, vol. 85, pp 3918-3925, 2013.

[64] K.Y. Cho, Y.I. Kwon, J.R. Youn, Y.S. Song, “Evaluation of Slurry Characteristics for Rechargeable Lithium-ion Batteries,” Materials Research Bulletin, vol. 48, pp 2922-2926, 2013.

[65] H.J. Oh, D.J. Lee, C.G. Lee, K.Y. Jo, D.H. Lee, J.R. Youn, Y.S. Song, “Warpage analysis of a micro-molded parts prepared with liquid crystalline polymer based composites,” Composites Part A,  vol.53, pp 34-45, 2013.

[66] S.H. Lee, Y.S. Song, “Effect of enzyme and ammonia treatments in green composite systems,” Journal of Composite Materials, vol. 47, pp 3249-3255, 2013.

[67] J.H. Park, Y.S. Song, J.G. Ha, Y.K., Kim, S.K. Lee, S.J. Bai, “Electrochemical sensing of high density photosynthetic cells using a microfluidic chip,” Sensors and Actuators B-Chemical,  vol.188, pp 1300-5, 2013.

[68] D.J. Lee, H. Brenner, J.R. Youn, Y.S. Song, “Multiplex particle focusing via hydrodynamic force in viscoelastic fluid,”Scientific Reports, vol. 3, 3258, 2013.

[69] S.H. Jeon, J.Y. Jang, J.R. Youn, J.H. Jeong, H. Brenner, Y.S. Song, “Fullerene embedded shape memory nanolens array,” Scientific Reports, vol. 3, 3269, 2013.

[70] S.H. Jeon, J.H. Jeong, Y.S. Song, W.I. Jeong, J.J. Kim, J.R. Youn, “Vacuum nano-hole array embedded organic light emitting diodes,” Nanoscale, vol. 6, pp 2642-2648, 2014.

[71] Y.S. Song, S.J. Bai, “Characterization of a single cell of Chlorella in a microfluidic channel using amperometric electrode arrays,” Biotechnology Letters, vol. 36, 2185-2191, 2014.

[72] D.H. Lee, H.J. Oh, S.J. Bai, Y.S. Song, “Photosynthetic Solar Cell Using Nanostructured Proton Exchange Membrane for Microbial Biofilm Prevention,” ACS Nano, vol. 6, pp 6458-65, 2014.

[73] Y.I. Kwon, Y.S. Song, “Agitation effect on the rheological behavior of lithium-ion battery slurries,” Journal of Electronic Materials, vol. 44, pp 475-81, 2015.

[74] H.R. Youn, D.J. Lee, J.R. Youn, Y.S. Song, “Ferrohydrodynamic Energy Harvesting Based on Air Droplet Movement,” Nano Energy, vol. 11, 171-178, 2015.

[75] D.J. Lee, S.H. Hwang, Y.S. Song, J.R. Youn, “Statistical modeling of effective elastic modulus for multiphased hybrid composites,” Polymer Testing, vol. 41, pp 99-105, 2015.

[76] Y.S. Song, T.K. Jeong, “Electromagnetic characterization of a computational asymmetric analysis for wireless networks,” Microsytem Technol, vol. 21, pp 591-597, 2015.

[77] S.H. Jeon, J.H. Lee, J.H. Jeong, Y.S. Song, C.K, Moon, J.J. Kim, J.R. Youn, “Vacuum nanohole array embedded phosphorescent organic light emitting diodes,” Scientific Reports, vol. 5, 8685, pp 1-7, 2015.

[78] H.K. Lee, Y.G. Park, T. Jeong, Y.S. Song, “Green nanocomposites filled with spent coffee grounds,” Journal of Applied Polymer Science, vol. 132, pp 1-7, 2015.

[79] D.H. Kim, Y.S. Song, “Rheological behavior of cellulose nanowhisker suspension under magnetic field,” Carbohydrate Polymers, vol. 126, pp 240-247, 2015.

[80] D.H. Kim, Y.S. Song, “Anisotropic optical film embedded with cellulose nanowhisker,” Carbohydrate Polymers, vol. 130, pp 448-454, 2015.

[81] S.H. Hwang, D.J. Lee, H.R. Youn, Y.S. Song, J.R. Youn, “Effects of Fiber Length Distribution on Flow Property and Internal Microstructure of an Injection Molded Part,” Macromolecular Research, vol. 23, pp 844-849, 2015.

[82] H.J. Lee, H.K. Lee, E. Lim, Y.S. Song, “Synergistic effect of lignin/polypropylene as a compatibilizer in multiphase eco-composites,” Composites Science and Technology, vol. 118, pp 193-197, 2015.

[83] H.J. Oh, Y.S. Song, “Precise Nanoinjection Molding through Local Film Heating System,” RSC Advances, vol. 5, pp 99797-99805, 2015.

[84] H.M. Kim, J.R. Youn, Y.S. Song, “Hydrodynamic fabrication of structurally gradient ZnO nanorods,” Nanotechnology, vol. 27, 0957-4484, 2016.

[85] D.H. Wee, J.R. Youn, Y.S. Song, “Thermal-induced optical modulation of liquid crystal embedded polymer film on silver nanowire heater,” Solar Energy Materials & Solar Cells, vol. 147, pp 150-156, 2016.

[86] D.H. Wee, S.H. Hwang, J.R. Youn, Y.S. Song, “Tunable optofluidic birefringent lens,” Soft Matter, vol. 12, pp 3868-3876, 2016.

[87] D.J. Lee, Y.S. Song, “Anomalous water drop bouncing on a nanotextured surface by the Leidenfrost levitation”, Applied Physics Letters, vol. 108, 201604, 2016.

[88] S.Y. Ahn, Y.S. Song, “Viscoelastic characteristics of all cellulose suspension and nanocomposite,”Carbohydrate Polymers, vol. 151, pp 119-129, 2016.

[89] M.J. Kim, D.J. Lee, J.R. Youn, Y.S. Song, “Two step label free particle separation in a microfluidic system using elasto-inertial focusing and magnetophoresis,” RSC Advances, vol. 6, pp 32090-32096, 2016.

[90] D.H. Kim, Y.S. Song, “Cellulose nanocrystal embedded triacetate cellulose composite films,” Polymer Composites, vol. 37, pp 3228-33, 2016.

[91] D.G. Seong, J.R. Youn, Y.S. Song, “Modeling of rheological behavior for polymer nanocomposites via Brownian dynamic simulation,“ Korea-Australia Rheoloy, vol. 28, pp 381-388, 2016.

[92] S.H. Yang, D. Lee, J.R. Youn, Y.S. Song, “Multiple-line particle focusing under viscoelastic flow in a microfluidic device,” Analytical Chemistry, vol. 89, pp 3639-47, 2017.

[93] H.J. Oh, Y.S. Song, “Surface strengthening of injection molded parts by applying a thermal insulation film,” RSC Advances, vol. 7, 14302, 2017.

[94] J.H. Lee, Y.S. Song, E. Lim, “Transformation of amorphous to crystallized carbon,” Applied Physics Letters, vol. 110, 143104, 2017.

[95] H.J. Lee, S.J. Bai, Y.S. Song, “Microfluidic electrochemical impedance spectroscopy of carbon composite nanofluids,” Scientific Reports, vol. 7, 722, 2017.

[96] J.G. Ha, Y.S. Song, S. Jung, S. Jang, Y. Kim, S.J. Bai, J.H. Park, S.K. Lee, “Novel microbial photobioelectrochemical cell using an invasive ultramicroelectrode array and a microfluidic chamber,” Biotechnology Letters, vol. 39, pp 849-855, 2017.

[97] S.Y. Pak, Z.M. Huang, J.R. Youn, Y.S. Song, “Morphology and physical properties of graphene nanoplatelet embedded poly(vinyl alcohol) composite aerogel,” Current Applied Physics, vol. 17, pp 727-731, 2017.

[98] Y.S. Song, M. Bok, E. Lim, “Carrier transport of carbon nanotube embedded organic semiconductor composite,” Materials Research Bulletin, vol. 90, pp 232-6, 2017.

[99] S.Y. Lee, D. Wee, J.R. Youn, Y.S. Song, “Manipulation and analysis of an optofluidic multiphase microlens,” RSC Advances, vol. 7, 35827, 2017.

[100] J. Park, H. Kim, J.R. Youn, Y.S. Song, “Strategic design and fabrication of acrylic shape memory polymers,” Smart Materials and Structures, vol. 26, 085026, 2017.

[101] D.J. Lee, Y.S. Song, “Thermomechanical anisotropy and flowability of talc and glass fiber reinforced multiphase polymer composites,” Composite Structures, vol. 174, pp 329-37, 2017.

[102] J. Park, J.R. Youn, Y.S. Song, “Sustainable antireflection using recoverable nanopattern arrays,”  Journal of Materials Chemistry C, vol. 5, pp 10600-8, 2017.

[103] J. Park, K.S. Minn, H.R. Lee, S.H. Yang, C.B. Yu, S.Y. Park, C.S. Oh, Y.S. Song, Y.J. Kang, J.R. Youn, “ Cell openness manipulation of low density polyurethane foam for efficient sound absorption,” Journal of Sound and Vibration, vol. 406, pp 224-36

[104] J. Park, J.R. Youn, Y.S. Song, “Carbon nanotube embedded nanostructure for biometrics, ” ACS Applied Materials & Interfaces, vol. 9, pp 44724-44731, 2017.

[105] M.J. Kim, J.R. Youn, Y.S. Song, “Focusing manipulation of microalgae in a microfluidic device using self-produced macromolecules,” Lab on a chip, vol. 18, pp 1017-1025, 2018.

[106] J. Park, S.H. Yang, K.S. Minn, C.B. Yu, S.Y. Pak, Y.S. Song, J.R. Youn, “Design and numerical analysis of syntactic hybrid foam for superior sound absorption,” Materials & Design, vol. 142, pp 212-220, 2018.

[107] M. Kim, E Lim, Y.S. Song, “Hardness enhancement of and an organic-inorganic hybrid film by using nitrogen ion-beam irradiation,” Journal of the Korean Physical Society (JKPS), vol. 72, 906, 2018.

[108] Y.S. Song, C. Kang, J. Jeong, K. Kim, E. Lim, “Rheological analysis of live and dead microalgae suspensions”, Journal of the Korean Physical Society (JKPS), vol. 72, 858, 2018.

[109] D.G. Seong, S. Kim, M.K. Um, Y.S. Song, “Flow-induced deformation of unidirectional carbon fiber preform during the mold filling stage in liquid composite molding process,” Journal of Composite Materials, vol. 52, pp 1265-1277, 2018.

[110] S. Pak, S. Park, D. Lee, Y.S. Song, “Micromechanical and dynamic mechanical analyses for characterizing improved interfacial strength of maleic anhydride compatibilized basalt fiber/polypropylene composites,” Composite Structure, vol. 193, pp 73-79, 2018.

[111] C. Yu, S.H. Yang, S.Y. Pak, J.R. Youn, Y.S. Song, “Graphene embedded form stable phase change materials for drawing the thermo-electric energy harvesting,” Energy Conversion and Management, vol. 169, 88–96, 2018.

[112] D.J. Lee, Y.S. Song, “Modeling the effects of elastic modulus and thermal expansion coefficient on the shrinkage of glass fiber reinforced composites,” Composites Part B, vol. 146, pp 98-105, 2018.

[113] Y.I. Kwon, Y.S. Song, “Application of injection-compression molding to thin-walled polymeric parts,” Korea-Australia Rheology Journal, vol. 30, pp 161-167, 2018.

[114] H.M. Kim, Z.M. Huang, J.S. Kim, J. R. Youn, Y.S. Song, “Fabrication and analysis of dual-scaled shape memory foam,” European Polymer Journal, vol. 106, 188-195, 2018.

[115] S.H. Yang, J. Park, J.R. Youn, Y.S. Song, “Programmable microfluidic logic device fabricated with shape memory polymer,”Lab on a chip, vol. 18, 2865-2872, 2018.

[116] S.H. Yang, J.R. Youn, Y.S. Song, “A microfluidic binary logic device using inertia-elastic particle focusing,” Current Applied Physics, vol. 18, 975-981, 2018.

[117] Y.S. Song, C. Kang, J. Jeong, M. Kim, E. Lim, “Surface analysis of curved polymeric plates irradiated with proton and ion beam,” RSC Advances, vol. 8, 34895, 2018.

[118] Y.I. Kown, E. Lim, Y.S. Song,  “Simulation of injection-compression molding for thin and large battery housing,” Current Applied Physics, vol. 18, 1451, 2018.

[119] H. Kim, J.R. Youn, Y.S. Song, “Eco-friendly flame retardant nanocrystalline cellulose prepared via silylation,” Nanotechnology, vol. 29(45), 455702, 2018

[120] S.Y. Lee, H.M. Kim, J. Park, S.K. Kim, J.R. Youn, Y.S. Song, “Enhanced Plasmonic Particle Trapping using Hybrid Structure of Nanoparticles and Nanorods,” ACS Applied Materials & Interfaces, vol. 10, 41655-63, 2018.

[121] H.K. Kim, Y.S. Song, “ Injection molded mechanoluminescent composites,” Composites Science and Technology, vol. 168, pp 224-229, 2018.

[122] H.K. Kim, Y.S. Song, “Analysis of in-mold coating process and ion beam irradiation,” Progress in Organic Coatings, vol. 126, pp 28-34, 2019.

[123] J. Park, H.M. Kim, J.R. Youn, Y.S. Song, “Smart noise control using shape memory sound absorber,” Advanced Materials Technologies, vol. 4, 1800410, 2019.

[124] H.J. Oh, Y.S. Song, “Enhanced performance of injection-compression molded parts in ball drop tests,” Korea-Australia Rheology Journal, vol. 31, pp 35-39, 2019.

[125] M.J. Kim, S.J. Bai, J.R. Youn, Y.S. Song, “Anomalous power enhancement of biophotovoltaic cell, Journal of Power Sources, vol. 412, pp 301-310, 2019.

[126] S.H. Yang, D. Lee, J.R. Youn, Y.S. Song, “Double-line particle focusing induced by negative normal stress difference in a microfluidic channel,” Microfluidics and Nanofluidics, vol. 23:21, pp 1-10, 2019.

[127] C. Yu, J.R. Youn, Y.S. Song, “Encapsulated phase change material embedded by graphene powders for smart and flexible thermal response,” Fibers and Polymers, vol. 20, pp 545-554, 2019.

[128] H.M. Kim, S. Lee, D. Lee, Y.S. Song, “Synergistic improvement of electrical and thermal conductivities of carbon-based nanocomposites and its prediction by Mori-Tanaka scheme with interfacial resistances,” Composite Structure, vol. 211, pp 56-62, 2019.

[129] S. You, Y.S. Song, S.J. Bai, “Characterization of a Photosynthesis-based Bioelectrochemical Film Fabricated with a Carbon Nanotube Hydrogel,” Biotech and Bioprocess Engineering, vol. 24, pp 337-342, 2019.

[130] H.K. Lee, Y.S. Song, “Anomalous dichroism of cellulose nanowhisker embedded composite film,” Composites Part B, vol. 163, pp 1-8, 2019.

[131] Y.S. Song, E. Lim, “Effect of proton and ion beam treatment on injection molded cyclic olefin copolymers,” Current Applied Physics, vol. 19, pp 381-387, 2019.

[132] Z.M. Huang, S.Y. Lee, H.M. Kim, J.R. Youn, Y.S. Song, “Permeability analysis of non-crimp fabrics for resin transfer molding,”  Polymers and Polymer Composites, vol. 27, pp 429-439, 2019.5.

[133] C. Yu, J.R. Youn, Y.S. Song, “Multiple energy harvesting based on reversed temperature difference between graphene aerogel filled phase change materials,” Macromolecular Research, vol. 27, pp 606-613,  2019.06.

[134] D.G. Seong, C. Kang, S.Y. Pak, C.H. Kim, Y.S. Song, “Influence of fiber length and its distribution in three phase poly(propylene) composites,” Composites Part B, vol. 168, pp 218-225, 2019.

[135] Z.M. Huang, S.Y. Lee, H.M. Kim, J.R. Youn, Y.S. Song, “Three-dimensional numerical simulation for resin transfer molding of automotive wheel,”  Korea-Australia Rheology, vol. 31, pp 141-147, 2019.7.

[136] J.H. Park, J.R. Youn, Y.S. Song, “Hydrodynamic Metamaterial Cloak for Drag-Free Flow,” Physical Review Letters, vol. 123, 74502, 2019.8.

[137] H.M. Kim, J.H. Park, Z.M. Huang, J.R. Youn, Y.S. Song, “Carbon nanotubes embedded shape memory polyurethane foams,” Macromolecular Research, vol. 27, pp 919-925, 2019.09.

[138] D.H. Kim, Y.S. Song, “ Micro-injection molding using a polymer coated mold,” Microsystem Technologies, vol. 25, pp 4011-4017, 2019.10.

[139] M.J. Kim, J.R. Youn, Y.S. Song, “Autonomous cell sorting using self-secreted macromolecules,” Microfluidics and Nanofluidics, vol. 23(115), pp 1-10, 2019.10.

[140] H. Kim, J. Park, K.S. Minn, S.Y. Pak, D. Lee, J.R. Youn, Y.S. Song, “Flame retardant composite foam modified by silylated nanocellulose and tris(2-chloropropyl) phosphate,” Fibers and Polymers, vol. 20, pp 2280-2288, 2019.11.

[141] Z.M. Huang, H.M. Kim, J.R. Youn, Y.S. Song, “Injection Molding of Carbon Fiber Composite Automotive Wheel,” Fibers and Polymers, vol. 20, pp 2665-2671, 2019.12

[142] J.H. Park, J.R. Youn, Y.S. Song, “Fluid-Flow Rotator Based on Hydrodynamic Metamaterial,” Phys. Rev. Applied 12, 061002, 2019. 12.

[143] ] C. Yu, J.R. Youn, Y.S. Song, “Tunable electrical resistivity of carbon nanotube filled phase change material via solid-solid phase transitions,” Fibers and Polymers, vol. 21, pp 24-32, 2020.01

[144] H. Kim, J. Par, J.R. Youn, Y.S. Song, “Eco-friendly Nanocellulose Embedded Polymer Composite Foam for Flame Retardancy Improvement,” Macromolecular Research, vol. 28, pp 165-171, 2020.02

[145] S.H. Park, S. Bai, Y.S. Song, “Improved performance of carbon nanotubes embedded photomicrobial solar cell,” Nanotechnolgy, vol. 31, 115401, 2020.03

[146] J.H. Park, S.Y. Park, D. Lee, Y.S. Song, “Shape memory polymer composites embedded with hybrid ceramic microparticles,” Smart Materials and Structures, vol. 29, 055037, 2020, 05.

[147] E. Lim, S.Y. Ahn, Y.S. Song, “Carrier Transport of All Carbonized β-Glucosic Eco-materials,” Nanotechnology, vol. 31, 345201, 2020.06

[148] M.J. Kim, S. Lee, C. Moon, J.J. Kim, J.R. Youn, Y.S. Song, “A Broadband Multiplex Living Solar Cell,” Nano Letters, vol. 20, pp 4286-91, 2020.06

[149] S.Y. Park, Y.S. Song, “Fabrication and Analysis of Long Fiber Reinforced Polypropylene Prepared via Injection Molding,” Macromolecular Research, vo28, pp 714-720, 020.07

[150] J.H. Park, Y.S. Song, “Assembling hydrodynamic cloaks for complex object concealment from drag,” Journal of Fluids and Structures, vol. 98, 103136, 2020.10

[151] J.H. Park, Y.S. Song, “Laminar flow manipulators,” Extreme Mechanical Letters, vol. 40, pp 1-5, 2020.10

[152] M. Bok, Z. Zhao, S.H. Hwang, H. Kang, S.Jeon, J. Ko, J. Jeong, Y.S. Song, Eunju Lim, J. Jeong, “Effective dispensing methods for loading drug only to the tip of DNA microneedles,” Pharmaceutics, vol. 12, 954, 2020.

[153] S. Jeong, Y.S. Song, E. Lim, “Fabrication and characterization of aluminum nanoparticles reinforced
composites,” Polymers, vol. 12, 2772, 2020

[154] J.H. Park, J.R. Youn, Y.S. Song, “Metamaterial hydrodynamic flow concentrator,” Extreme Mechanical Letters, vol. 42, 101061, 2021.01 

[155] S.H. Park, Y.S. Song, “Carbon nanofluid flow based biophotovoltaic cell,” Nano Energy, vol. 81, 105624, 2021 

[156] C. Kang, Y.S. Song, “Enhancement in surface property via in-mold coating process,” Macromolecular Research, vol. 29, pp 185-190, 2021 

[157] J.W. Jeong, Y.S. Song, “Characterization of hybrid composites reinforced with metal and ceramic nanoparticles,” Polymer Composites, vol. 42, pp 2317-2323, 2021 

[158] J.Y. Nam, H.K. Kim, Y.S. Song, “Fabrication and analysis of sepiolite/glass microcapsules/liquid crystal polymer composites,” Molecules, vol. 26, pp 2522, 2021. 

[159] S.H. Yang, D.J. Lee, S.Y. Pak, J.W. Jeong, J.R. Youn, Y.S. Song, “Enhancement of Surface Hardness and Glossiness of Polymer Composites Filled with Reclaimed Marble Waste Powder by Ion Beam Irradiation,” Fibers and Polymers, vol. 22, pp 1754-60, 2021. 

[160] D.H. Kim, Y.S. Song, “Moldability improvement in microinjection molding via film lamination,” Polymers and Polymer Composites, vol. 29, pp S99–S105, 2021.11. 

[161] C. Yu, J.R. Youn, Y.S. Song, “Reversible thermo-electric energy harvesting with phase change material (PCM) composites,” Journal of Polymer Research, vol. 28, pp 279, 2021.08 

[162] S.Y. Pak, S.Y. Kim, D. Lee, Y.S. Song, “Micro-Macroscopic coupled modeling for the prediction of synergistic improvement on the thermal conductivity of boron nitride and multi-walled carbon nanotube reinforced composites,” Composites Part A, vol. 148, pp 106474, 2021.

[163] C. Yu, J.R. Youn, Y.S. Song, “Enhancement of thermo-electric energy conversion using graphene nano-platelet embedded phase change material,” Macromolecular Research, vol. 29, pp 534-542, 2021.08

[164] M.J. Kim, Z.M. Huang, Y.K. Kim, J. Jang, J.R. Youn, Y.S. Song, “Optorheological Characteristics of Photosynthetic Bacterium Suspension," Langmuir, vol. 37, pp 10979-10986, 2021.09

[165] C. Yu, Y.S. Song, “Analysis of thermo-electric energy harvesting with graphene aerogel supported form-stable phase change materials,” Nanomaterials, vol. 11, pp 2192, 2021.08

[166]  C. Yu, H. Kim, J.R. Youn, Y.S. Song, “Enhancement of structural stability of graphene aerogel for thermal energy harvesting,” ACS Applied Energy Materials, vol. 4, pp 11666-11674, 2021.10

[167] C. Yu, J.R. Youn, Y.S. Song, “Enhancement in thermo-electric energy harvesting efficiency by embedding PDMS in form-stable PCM composites,” Polymers for Advanced Technologies, vol. 33, pp 700-709, 2022.03

[168] S.J. Lee, J.J. Song, H.J. Lee, H.Y. Jeong, Y.S. Song, “Enhanced energy harvesting in bio-photovolatic cell by integrating silver nanoparticle,” Journal of the Korean Physical Society, vol. 80, pp 420-426, 2022.03.

[169] C. Yu, J. Park, J.R. Youn, Y.S. Song, “Integration of form-stable phase change material into pyroelectric energy harvesting system,” Applied Energy, vol. 307, pp 118212, 2022.02 

[170] C. Yu, J. Park, J.R. Youn, Y.S. Song, “Sustainable solar energy harvesting using phase change material (PCM) embedded pyroelectric system,” Energy Conversion and Management, vol. 253, pp 115145, 2022.02

[171] C. Yu, Y.S. Song, “Advanced internal porous skeleton supported phase change materials for thermo-electric energy conversion applications", Journal of Polymer Research, vol. 29, pp 79, 2022.03. 

[172] C. Yu, Y.S. Song, “ Modification of graphene aerogel embedded form-stable phase change materials for high energy harvesting efficiency,” Macromolecular Research, vol. 30, pp 198-204, 2022. 

[173] J.M. Kim, H. Kyung, Y.S. Song, “Analysis of poly(dioxanone) foam prepared using salt leaching method,” Journal of Applied Polymer Science, vol. 139, issue 24, pp 52331, 2022.06. 

[174] H.J. Kang, Y.S. Song, “Effects of humidity and temperature on hydrolytic degradation of polydioxanone,” Polymer Engineering and Science, vol. 62, pp 2070-78, 2022.06. 

[175] J.Y. Nam, Y.S. Song, “Preparation and analysis of biodegradable polydioxanone/chitosan film,” Journal of Polymer Research, vol. 29, pp 224, 2022.06 

[176] C. Yu, Y.S. Song, “Phase change material (PCM) composite supported by 3D cross-linked porous graphene aerogel,” Materials, vol. 15, pp 4541, 2022.06. 

[177] C. Yu, Y.S. Song, “Characterization of phase change materials fabricated with cross-linked graphene aerogels,” Gels, vol. 8, pp. 572, 2022.09.  

[178] C. Yu, Y.S. Song, “ Graphene aerogel supported phase change material for pyroelectric energy harvesting: structural modification and form stability analysis,” Energy Technology, vol. 11, pp. 1-9, 2023.02. 

[179] C. Yu, Y.S. Song, “Enhancing energy harvesting efficiency of form stable phase change materials by decreasing surface roughness,” Journal of Energy Storage, vol. 58, pp 1-11, 2023.02. 

[180] C. Yu, Y.S. Song, “Modified Supporting Materials to Fabricate Form Stable Phase Change Material with High Thermal Energy Storage”, Molecules, vol. 28, pp 1309, 2023.01 

[181] Z.M. Huang, H.J. Oh, Y.S. Song, “Processability and biodegradability of polylactic acid nasal implants”, Microsystem Technologies,  vol. 29, pp 265-270, 2023. 01 

[182] C. Yu, Y.S. Song, “Form stable phase change material supported by sensible and thermal controllable thermistor”, Composites Communications, vol. 40, pp 101600, 2023.06 

[183] J.W. Jeong, Y.S. Song, “Surface characteristics of metal-like composites fabricated with aliphatic polyketone”, Korea-Australia Rheology Journal, vol. 35, pp 169-178, 2023.08, 

[184] S.Y. Ahn, C. Yu, Y.S. Song, “Cellulose nanocrystal embedded composite foam and its carbonization for energy application”, Polymers, vol. 15, pp 1-15, 2023.08 

[185] S.Y. Ahn, C. Yu, Y.S. Song, “Electrorheological behavior of heat-treated sepiolite suspension” Korea-Australia Rheology, vol. 35, pp 391-396, 2023.11.

[186] Z.M. Huang, H.J. Oh, Y.S. Song, “Processability and biodegradability of polylactic acid nasal implants”, Microsystem Technologies, 2023.

[187] M. Bok, Y.I. Kwon, Z.M. Huang, E. Lim, “Portable Iontophoresis Device for Efficient Drug Delivery”, Bioengineering, 2023.

[188] M.J. Kim, Z.M. Huang, Y.K. Kim, J. Jang, J.R. Youn, Y.S. Song, “Optorheological Characteristics of Photosynthetic Bacterium Suspension”, Langmuir, 2021.

[189] J. Ha, Y. Song, Y. Joo, Z.M. Huang, J.S. Yun, D. Lee, “Rheological Characterization of the Dispersibility of Graphene Nanoparticles in Polymer Nanocomposites”, Textile Science and Engineering, 58(1), 17-24, 2021.

[190] Z.M. Huang, H.M. Kim, J.R. Youn, Y.S. Song, “Injection molding of carbon fiber composite automotive wheel”, Fibers and Polymers, 20(12), 2665-2671,2019.

[191] Z.M. Huang, S.Y. Lee, H.M. Kim, J.R. Youn, Y.S. Song, “Three-dimensional numerical simulation for resin transfer molding of automotive wheel”, Korea-Australia Rheology Journal, 31(3), 141-147, 2019.

[192] Z.M. Huang, S.Y. Lee, H.M. Kim, J.R. Youn, Y.S. Song, “Permeability analysis of non-crimp fabrics for resin transfer molding”, Polymers and Polymer Composites, 27(7), 429-439, 2019.

[193] H.M. Kim, J. Park, Z.M. Huang, J.R. Youn, Y.S. Song, “Carbon nanotubes embedded shape memory polyurethane foams”, Macromolecular Research, 27(9), 919-925, 2019.

[194] H.M. Kim, Z.M. Huang, J.S. Kim, J.R. Youn, Y.S. Song, “Fabrication and analysis of dual-scaled shape memory foam”, European Polymer Journal, 106, 188-195, 2018.

[195] S.Y. Pak, Z.M. Huang, J.R. Youn, Y.S. Song, “Morphology and physical properties of graphene nanoplatelet embedded poly (vinyl alcohol) composite aerogel”, Current Applied Physics, 17(5), 727-731, 2017