Conferences

Conference Papers

1. Zhen-Wei Tsai, Chao-Ching Ho*, "Synthetic Image Generation of Microstructure Surfaces Using Physically Based Rendering Techniques ," The 85th Japan Society of Applied Physics (JSAP) Autumn Meeting 2024, Toki Messe, Japan, Sep. 16-20, 2024.

2. R.-F. Chen, Y.-C. Chen* and C.-C. Ho, "Development of an Artificial Intelligence - Assisted Spectral Analysis Method for Evaluation of Early Osteoarthritis," 2024 14th International Conference on Biomedical Engineering and Technology (ICBET 2024), Seoul, South Korea during June 14-17, 2024.   

3. J.-W. Li, E. Su, and C.-C. Ho, "Prediction of critical dimensions for 3D TSV structures using artificial neural network ," SPIE Advanced Lithography + Patterning , 25 -29 February, San Jose, California, United States, 2024. 

4. S.-H. Lin, C.-W. Ku, C.-L. Kan, H.-S. Xie, C.-C. Ho and C.-Y Chang, "Parameters Optimization for Low Residual Strain and High Manufacturing Speed for Polypropylene Material during Laser Drilling," 10th International Conference o Asian Society for Precision Engineering and Nanotechnology (ASPEN 2023), Nov. 21-24, Hong Kong.  

5. Chao-Ching Ho*, Chun-Han Liu, Ming-Fu Chen, Ming-Chieh Kao "Multi-task Learning Based on Deep Convolutional Neural Networks for Surface Defect Detection of Metal Gaskets," The International Measurement Confederation IMEKO, Technical Committee 10 on Measurement for Diagnostics, Optimization and Control, Sep. 21-22, 2023, Delft, The Netherlands. (Best Scientific Paper Award)

6. Jia-Wei Li, Chong-Han Hsu, Jiao-Kai Wang, Bo-En Tsai, Yong-Jing Su, Chao-Ching Ho*, "Predicting the critical dimensions of HAR TSV structures using joint training models and electromagnetic simulation tools," The 15tth International Symposium on Measurement Technology and Intelligent Instruments (ISMTII 2023), Sep. 17-20, 2023, Seoul, South Korea. (Best Paper Award)

7. Saurav Gautam, Shih-Wen Chen, Chao-Ching Ho*, "Analysis of through silicon via sidewall etch parameters variation using FDTD simulation," The 15tth International Symposium on Measurement Technology and Intelligent Instruments (ISMTII 2023), Sep. 17-20, 2023, Seoul, South Korea. 

8. Yu-Wei Lin, Chu-Fu Chiu, Bo-En Tsai, Li-Hsien Chen, Chao-Ching Ho*, "Real-time dynamic intelligent image recognition and tracking system for rockfall disasters," The 15tth International Symposium on Measurement Technology and Intelligent Instruments (ISMTII 2023), Sep. 17-20, 2023, Seoul, South Korea. 

9. Z.-H. Ho, C.-H. Lin, M.-F. Chen, C.-C. Ho, "Depth Estimation Using Simulated Soft Body Light Field Cameras," The 11th International Conference on Advanced Robotics and Intelligent Systems (ARIS 2023), Taipei, Aug. 30 - Sep 1, 2023.

10. Y.-C. Lin, C.-C. Ho, M.-C. Kao, "Machine Vision based Metal Pipe Defect Detection," The 11th International Conference on Advanced Robotics and Intelligent Systems (ARIS 2023), Taipei, Aug. 30 - Sep 1, 2023.

11. C.-H. Huang, Y.-C Lin, Z.-S. Tseng, S.-C. Chen, C.-C. Ho, "Machine vision based real-time panel inspection," The 11th International Conference on Advanced Robotics and Intelligent Systems (ARIS 2023), Taipei, Aug. 30 - Sep 1, 2023.

12. W.-X. Peng, S.-H. Lin, C.-C. Ho, C.-Y. Chang, "Parameter Optimization of Fiber Laser Cutting of Stainless Steel using Taguchi Method," The 11th International Conference on Advanced Robotics and Intelligent Systems (ARIS 2023), Taipei, Aug. 30 - Sep 1, 2023.

13. Chao-Ching Ho*, Han-san Xie , Che-Yu Hsieh, "In-situ monitoring of laser machining in transparent and hard brittle materials with chuck-based electric fields "  the 24th International Symposium on Laser Precision Microfabrication (LPM2024), Hirosaki, Aomori, Japan, June 13-16, 2023.

14. C.-C. Ho and S.Mohanty, "Reinforcement learning optimized digital twin based synthetic data generation for defect detection of titanium spacer," SPIE Optical Metrology 2023, 26 - 29 June 2023, Munich, Germany. 

15. C.-C. Ho and S.-L. Chua, "On-line real-time detection system for wafer surface defects based on deep learning and generative adversarial network," SPIE Advanced Lithography + Patterning 26 February - 2 March 2023, San Jose, California, United States. 

16. C.-L. Kan,H.-S. Xie, C.-C. Ho, C.-Y. Chang, “In-situ Measurement of Residual Stress and Thermal Deformation of Substrate after Laser Drilling" 2022 IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications (MESA 2022), Nov. 28-30, Taipei, Taiwan.

17. C.-C. Ho and C.-Y. Yu, “Deep Convolutional Neural Network based Fabric Color Difference Detection," 25th International Conference on Mechatronics Technology (ICMT 2022), Nov. 18-21, Kaohsiung, Taiwan.

18. M.-H. Tung and C.-C. Ho*, "Surface Scratch Defect Detection of Titanium Spacer Ring in Hard Disk based on Convolutional Neural Network," 9th International Conference o Asian Society for Precision Engineering and Nanotechnology (ASPEN 2022), Nov. 15-18, Singapore.  

19. Y.-R. Lin, Y.-C. Lin and C.-C. Ho*, "Flexibility wires of circular connector automatic disassembly process with the finite element analysis," 9th International Conference o Asian Society for Precision Engineering and Nanotechnology (ASPEN 2022), Nov. 15-18, Singapore.  

20. 馬鈺棠、何昭慶#，「應用熱成像及數位影像於複合材料結構的全場精密量測及含瑕疵檢測」，中國機械學會第39屆全國學術研討會，國立聯合大學，苗栗市，2022年12月2-3日。

21. 屈伯俊、林祐誠、何昭慶#，「基於進給與流場參數輔助電化學放電加工硬脆非導體材料之研究 」，中國機械學會第39屆全國學術研討會，國立聯合大學，苗栗市，2022年12月2-3日。

22. H.-S. Xie, C.-L. Kan, C.-Y. Chang, C.-C. Ho*, "Diagnosis and Maintenance System Combining 5G and Sensor Fusion," The 19th International Conference on Automation Technology (Automation 2022), November 11-13, 2022, Gardenvilla, Kaohsiung, Taiwan.

23. C.-C. Ho*, W.-M. Su and S. Mohanty, "Based on Deep Convolutional Neural Network and Machine Vision Applied to the Surface Defect Detection of Hard Disk Metal Gaskets," 18th IMEKO TC10 Conference, Measurement for Diagnostics, Optimisation and Control to Support Sustainability and Resilience, Warsaw, Poland, September 26–27, 2022. 

24. Sankarsan Mohanty, Shou-Lin Chu, Chao-Ching Ho* , "Deep Convolutional Neural Network-based Surface Defect Detection for Wafer," International Conference on Precision Engineering and Sustainable Manufacturing (PRESM 2022), July 20 to 22, 2022, Jeju, Korea, 2022. 

25. C.-C. Ho*, X. Yuan, S. Mohanty and Y.-W. Lin , "Deep Convolutional Neural Network-based Surface Defect Detection for Wafer Grinding Jig," Optics and Photonics for Advanced Dimensional Metrology II (SPIE), April 3-7, Strasbourg, France, 2022. 

26. C.-C. Ho*, H.-P. Wang, Y.-C. Chiao, "Deep Learning based application in TFT-LCD RIB Depth Detection," XXIII IMEKO World Congress “Measurement: sparking tomorrow’s smart revolution” August 30  September 3, 2021, Yokohama, Japan. 

27. C.-C. Ho*, J.-Y. Kao, "Study on real-time detection of laser drilling in transparent hard and brittle materials by an external electric field," XXIII IMEKO World Congress “Measurement: sparking tomorrow’s smart revolution” August 30  September 3, 2021, Yokohama, Japan. 

28. 周威圻、何昭慶#、蘇詠靖，「基於深度卷積神經網絡壓縮於紡織布料之表面瑕疵檢測 」，2021 第 19 屆精密機械與製造科技研討會論文集－PMMT 2021 ，台灣扣件產業技術發展協會，2021年6月11-13日。

29. 王皓平、何昭慶#，「基於機器學習之刀輪切割液晶顯示器玻璃斷面檢測系統  」，2021 第 19 屆精密機械與製造科技研討會論文集－PMMT 2021 ，台灣扣件產業技術發展協會，2021年6月11-13日。

30. 黃俊凱、何昭慶# 、范光照，「嵌入式開發板雷射穩定頻率系統之研究   」，2021 第 19 屆精密機械與製造科技研討會論文集－PMMT 2021 ，台灣扣件產業技術發展協會，2021年6月11-13日。

31. 高儁懿、何昭慶#，「基於外加電場之即時偵測雷射鑽孔於透明硬脆材料鑽孔研究 」，2021 第 19 屆精密機械與製造科技研討會論文集－PMMT 2021 ，台灣扣件產業技術發展協會，2021年6月11-13日。

32. 顏暄、何昭慶#、蘇詠靖，「基於深度卷積神經網絡應用於晶圓研磨治具之表面缺陷檢測 」，ISME 2021第五屆全國學術研討會，中原大學，2021年5月28-29日。

33. 王皓平 、喬遠程 、何昭慶#，「基於深度學習之 TFT-LCD 面板斷面瑕疵檢測於嵌入式系統效 能探討 」，ISME 2021第五屆全國學術研討會，中原大學，2021年5月28-29日。

34. 周威圻、何昭慶# 、蘇詠靖，「自動化剪枝於卷積神經網路壓縮之紡織品缺陷檢測  」，ISME 2021第五屆全國學術研討會，中原大學，2021年5月28-29日。

35. C.-C. Ho*, F.-S. Yang, " Automated Optical Inspection System for O-ring based on Photometric Stereo and Machine Vision," International Symposium on Computer, Consumer and Control (IS3C2020) , Nov. 13-16, Taichung, Taiwan.

36. Bo-En Tsai, Chao-Ching Ho, Yuan-Chen Chang, Chin-Cheng Hsu, Chia-Lung Kuo , " 應用有限元素分析探討圓孔磁鐵磁化琴鋼線之研究,"  International Conference on Smart Sensors 暨第25屆台灣化學感測器科技研討會/第23屆微奈米系統工程研討會, National Sun Yat-sen University, Kaohsiung, Taiwan  Oct. 19-20, 2020. 

37. 喬遠程、何昭慶* , 「基於深度學習之微動開關檢測 」，第二十屆全國AOI論壇與展覽，國立交通大學，2020年10月29日。

38. 張晏禎、楊福生、劉致奚、邱士榮 、何昭慶#，「應用於瓶狀物加工路徑生成之圖案映射方法 」，ISME 2020第五屆全國學術研討會，國立勤益科技大學，台中市，2020年9月28-29日。

39. 吳俊陞、楊福生、何昭慶、喬遠程 、何昭慶#，「基於機器視覺之橡膠尺寸量測與瑕疵檢測方 法 」，ISME 2020第五屆全國學術研討會，國立勤益科技大學，台中市，2020年9月28-29日。

40. 蘇偉鳴、楊福生、顏暄 、何昭慶#，「基於深度卷積神經網絡與機器視覺應用於硬 碟內金屬墊圈之表面瑕疵檢測 」，ISME 2020第五屆全國學術研討會，國立勤益科技大學，台中市，2020年9月28-29日。

41. 周威圻、何昭慶#、許文正，「基於U型神經網路應用於紡織品數位之自動光學檢測檢驗」，2020年紡織研究論文發表會，台北 ，2020年6月12日。

42. 周秉翰、何昭慶#、李貴琪，「基於深層卷積神經網路應用於紡織品數位之對花檢驗」，2020年紡織研究論文發表會，台北 ，2020年6月12日。

43. 何昭慶*、黃柏豪、戴立綸，「 運用Google classroom於問題導向學習在精微加工與檢測課程之研究」，創新教育與科技全國學術研討會  ，彰化 ，2019年12月13日。

44. 鄧永志、何昭慶*，「應用有限元素分析探討扇形磁鐵磁化琴鋼線之研究」 ，中國機械工程學會108年度年會暨第36屆全國學術研討會 ，臺北 ，2019年12月8日。

45. 戴立綸、何昭慶*，「自動生成缺陷標註之虛擬模型系統應用於深度學習預訓練模型」 ，中國機械工程學會108年度年會暨第36屆全國學術研討會 ，臺北 ，2019年12月8日。

46. 黃柏豪 、何昭慶*，「透過添加微奈米氣泡之電解液輔助電化學放電鑽孔於透明硬脆材料之研究 」 ，中國機械工程學會108年度年會暨第36屆全國學術研討會 ，臺北 ，2019年12月8日。

47. P.-H. Lu, C.-C. Ho*, Y-J. Chang, M. Bolger, "Deep learning based diamond wire saw inspection ," 8th International Conference o Asian Society for Precision Engineering and Nanotechnology (ASPEN 2019), Nov. 12-15, Matsue, Japan.  

48. You‐Cheng Lin and Chao-Ching Ho*, "Monocular-Vision and Dynamic Modelling Based Registration System for Three-Dimensional Workpiece" the 22nd International Conference on Advances in Materials and Processing Technology (AMPT 2019),  Oct. 20-24, Taipei, Taiwan. 

49. Chao-Ching Ho*, You‐An Lin and Chia‐Lung Kuo , "Electrochemical Discharge Machining for Sapphire Based on Machine Vision," the 22nd International Conference on Advances in Materials and Processing Technology (AMPT 2019), Oct. 20-24, Taipei, Taiwan. 

50. Po-Hsuan Lu, Chao-Ching Ho*, Matthew Bolger, Yuan-Jen Chang and Chia-Lung Kuo, "Multiple Exposure Fusion for Abrasive Grain Diamond Wire Saw Acquisition ," The 14th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII 2019), Sep. 1-4, Niigata, Japan.  

51. Yi-Fan Chen, Fu-Sheng Yang, Eugene Suc, and Chao-Ching Ho*, "Automatic Defect Detection System Based on Deep Convolutional Neural Networks,"  International Conference on Engineering, Science, and Industrial Applications (ICESI) 2019, Aug. 22-24, Tokyo, Japan.

52. 楊閔傑 、許進成、郭佳儱、張元震、何昭慶，「複合式圓盤電極於碳化鎢表面放電披覆TiCN鍍層」，2019 模具暨應用產業技術論文，臺北 ，2019年8月24日。

53. Y. -J. Chang, S.-H. Chou, C.-C. Ho, J. C. Hsu, C.-L. Kuo, "Nanosecond Laser Direct Submicron-scale Texturing with Breath Figure Method,"  the 8th International Congress on Laser Advanced Materials Processing (LAMP 2019), May 21-24, Hiroshima, Japan.

54. C.-C. Ho, R.-O. Yang, C.-L. Kuo, Y. -J. Chang, J. C. Hsu*, " Study on Double-Sided Cutting of Brittle Material by Nanosecond Fiber Laser,"  the 8th International Congress on Laser Advanced Materials Processing (LAMP 2019), May 21-24, Hiroshima, Japan.

55. C.-C. Ho, J.-C. Chen and C.-L. Kuo, "Micro-Drilling of Sapphire Using Electro Chemical Discharge Machining," International Conference on Smart Sensors (ICSS) (國際智慧感測器研討會暨第24屆台灣化學感測器科技研討會/第22屆微奈米系統工程研討會), Hsinchu County, Taiwan, June 3-4, 2019. 

56.  C.-C. Ho, Eugene Su, P.-O. Li,  Matthew. J. Bolger and H.-N. Pan, "Machine Vision and Deep Learning based Rubber Gasket Defects , "4th Conference on International Conference on Advanced Technology Innovation 2019 (ICATI 2019), July 15-18,  Sapporo, Hokkaido, Japan, 2019.

57.  邱昱仁、郭佳儱、施國亮、張元震、許進成、何昭慶，「微奈米氣泡於放電加工液製作及其於燃焼節能等特性之基礎研究」，台灣機電工程國際學會第四屆全國學術研討會及ISME2019福星熱能創意競賽  ，國立高雄科技大學 ，2019年2月15~16日。(MOST 107-2622-E-027-010-CC3)

58. Y. -J. Chang, F.-C. Huang,C.-C. Ho, J. C. Hsu, C.-L. Kuo, "Estimation of Heat Affected Zone by EDM on SUS 430 , " 17th International Conference on Precision Engineering. Nov.12 -16, Kamakura , Japan, 2018. 

59. 歐陽儒、郭佳儱、張元震、何昭慶、許進成,「沖壓輔助於奈秒雷射於硬脆材料之雙面切割孔加工之研究」，107年會暨第35屆全國學術研討會 ，國立中正大學 ，2018年11月30日。

60. 歐陽儒、郭佳儱、張元震、何昭慶、許進成,「光纖奈秒雷射於硬脆材料雙面加工應用 」，107年會暨第35屆全國學術研討會 ，國立中正大學 ，2018年11月30日。

61. 盧柏瑄、 郭佳儱、何文良、何昭慶*,「應用表面微結構於鑽石切割線合力改善之研究 」，2018台灣精密工程科技研討會(Taiwan Precision Technology Workshop, TPTW2018)  ，國立中興大學 ，2018年11月29日(MOST 107-2622-E-027-010-CC3)。

62. W.H. Yau, J.-C. Chen, Y.-A. Lin, C.-C. Ho*, C.-L. Kuo, "A study on the quality improvement of drilling holes in quartz glass by electrochemical discharge machining, " Automation 2018, Taipei, Taichung, Taiwan, December 6-8, 2018. (MOST 106-2221-E-027-051)

63. 何昭慶、陳家昌、林祐安,「具電極旋轉之電化學放電於玻璃鑽孔加工之研究 」，2018中華民國力學學會年會暨第42屆全國力學會議 (CTAM2018)，國立臺北科技大學，2018年11月23、24日(MOST 106-2221-E-027-051)。

64. , 何昭慶、鄭絢陽、盧柏瑄 , 「基於機器視覺之鑽石切割線製程檢測系統 」，2018中華民國力學學會年會暨第42屆全國力學會議 (CTAM2018)，國立臺北科技大學，2018年11月23、24日(MOST 107-2622-E-027-010-CC3)。

65. 陳奕帆、李柏桀、何昭慶* , 「基於機械視覺之殘差網路深度學習橡膠墊片表面瑕疵檢測」，第十八屆全國AOI論壇與展覽，國立交通大學，2018年10月4日。

66. 林祐誠、張榮華、何昭慶* , 「基於機器視覺之圓孔間相對角度量測系統」，第十八屆全國AOI論壇與展覽，國立交通大學，2018年10月4日。

67. 盧志嘉、楊福生、何昭慶*, 「基於機器視覺之手機墊片檢測系統開發  」，第19屆非破壞檢測研討會暨非破壞檢測年會 (CNDT 2018 )，國立臺灣科技大學，2018年9月27、28日。

68. 林祐安、戴尹宸、何昭慶*、郭佳儱、張元震、許進成,「用於航太零組件微孔鑽削之對稱式噴嘴及量測 」，第19屆非破壞檢測研討會暨非破壞檢測年會 (CNDT 2018 )，國立臺灣科技大學，2018年9月27、28日(106ACS-U21-07)。

69. C.-C. Ho, Eugene Su and Y.-W. You, "Deep learning based automated defect inspection for highly reflective and curved metal surface, "6th International Symposium on Sensor Science and 4th SPINTECH Technology Thesis Award, August 6-8, 2018, Kenting, Taiwan.

70. C.-C. Ho and R.-H. Zhang, "Non-coplanar hole angle measurement based on machine vision, "6th International Symposium on Sensor Science and 4th SPINTECH Technology Thesis Award, August 6-8, 2018, Kenting, Taiwan.

71. C.-C. Ho, J.-J. Lu and P.-C. Li, "Development of auto defect inspection system for cell phone silicone rubber gasket," 10th International Symposium on Precision Engineering Measurements and Instrumentation (ISPEMI 2018), August 8-10, 2018. Kunming , China.

72. 李柏桀、何昭慶，「基於機械視覺的七節顯示器芯片安裝系統不確定性模擬」，2018精密機械與製造科技研討會，台灣扣件產業技術發展協會，2018年5月18-20日。

73. Xuan-Yang Zheng and Chao-Ching Ho, "Online surface characterization of Ni/diamond sawing wire based on machine vision," 4th IEEE International Conference on Applied System Innovation 2018 (IEEE ICASI 2018), April 13-17, 2018, Chiba (千葉) , Tokyo, Japan, 2018.

74. 何昭慶、謝易耘，「基於多攝影機合成之輪胎鋼絲圈量測系統」，2017 MCTE—運輸與能源計量研討會，中原大學，2017年12月15日。

75. 陳俊廷、陳佑甄、江奕陞、廖朝弘、方敏華、郭佳儱、張元震、許進成、何昭慶，「新式雷射表面滲碳處理技術之基礎研究」，台灣金屬熱處理學會2017年會論文研討會，南臺科技大學，台南市，2017年12月9日。

76. 陳家昌、吳東昇、何昭慶、郭佳儱，「基於機械視覺與同軸噴流輔助電化學放電加工」，中國機械工程學會第三十四屆全國學術研討會，國立勤益科技科技大學，2017年12月1-1日。

77. 黃復琛、張元震、郭佳儱、許進成、何昭慶，「以 Ring Core 法結合 DIC 量測不鏽鋼板之殘留應力分佈」中國機械工程學會第三十四屆全國學術研討會，國立勤益科技科技大學，2017年12月1-1日。

78. 游原瑋、何昭慶，「基於機器視覺之高爾夫球桿瑕疵檢測」，中國機械工程學會第三十四屆全國學術研討會，國立勤益科技科技大學，2017年12月1-1日。

79. 張榮華、何昭慶，「 基於機器視覺之兩圓孔間相對角度的量測方法 」，中國機械工程學會第三十四屆全國學術研討會，國立勤益科技科技大學，2017年12月1-1日。

80. Chao-Ching Ho, Dung-Sheng Wu, Jia-Chan Chen, "Characteristics of the effect of swirling gas jet assisted electrochemical discharge machining for glass based on machine vision," 2017 The 3rd International Conference on Inventions, Sun Moon Lake, Taiwan, September 29 –  October 2, 2017. (Video, PDF)

81. Chao-Ching Ho, Dung-Sheng Wu, Jia-Chan Chen, "On-line Monitoring of Gas Film Formation in Electrochemical Discharge Machining Processes based on Machine Vision," The 59th Ilmenau Scientific Colloquium, Ilmenau, Germany, September 11 –  15, 2017.

82. C.-C. Ho, S.-Y. Chen and R.-H. Zhang, "Vision-based spraying system for shoemaking," The 30th IPPR Conference on Computer Vision, Graphics, and Image Processing (CVGIP 2017),Yunlin, Taiwan, August 21 – 23, 2017.

83. Chao-Ching Ho*, Dong-Shen Wu, Yuan-Jen Chang, Jin-Chen Hsu, Chia-Lung Kuo, S.-K. Kuo, "Experimental investigation of speckle pattern creating techniques for digital image correlation,"  the 18th International Symposium on Laser Precision Microfabrication (LPM2017), Toyama, Japan, June 5-8, 2017.

84. Y. Z. Hong, Y. J. Chang*, C. C. Ho, J. C. Hsu, C. L. Kuo, "Laser/stamping hybrid drilling process for micro-scale holes fabrication on Al sheets,"  the 18th International Symposium on Laser Precision Microfabrication (LPM2017), Toyama, Japan, June 5-8, 2017.

85. Jin-Chen Hsu, Chia-Hao Liu, Yuan-Jen Chang, Chao-Ching Ho, Chia-Lung Kuo, "Monitoring electrical responses of small-scale double-spot resistance welding with parallel electrodes", 2017 International Conference on Smart Science (ICSS2017), Huis Ten Bosch, Kyushu Japan, April 4-10, 2017.

86. Yuanjen Chang, Fu-Chen Huang, Jin-chen Hsu, Chao-Ching Ho, Chia-Lung Kuo, "DIC Measurement with Ring Core by Electro-Discharged Machining", 2017 International Conference on Smart Science (ICSS2017), Huis Ten Bosch, Kyushu Japan, April 4-10, 2017.

87. C.-C. Ho, Y.-J. Chang, J.-C. Hsu, C.-L. Kuo, and H.-J. Chen, "A Novel Rotary Liquid Lens for Laser Beam Shaping", International Symposium on Optomechatronic Technology(ISOT 2016), Tokyo, Japan, November 7-9, 2016.

88. C.-C. Ho, K.-Y. Shen, Y.-J. Chang, J.-C. Hsu, and C.-L. Kuo, "Swirling gas jet assisted laser percussion drilling for galvanometer scanned CO2 laser", The 2nd International Conference on Computing and Precision Engineering 2016, Kenting, Taiwan, Sep. 30 - Oct. 3, 2016.

89. 何昭慶、李冠宏、吳東昇、郭佳儱、張元震、許進成，「結合數位影像關係量測雷射鑽孔深度之研究 」，兩岸量測與檢測科技學術研討會(CSCMIT 2016)，中原大學，2016年11月1-3日。

90. 何昭慶、陳佑旻，「視覺伺服系統的不確定性分析」，海峽兩岸智慧製造（泉州）研討會，華僑大學，2016年6月10-12日。

91. J.-C. Hsu, Y.-R. Jheng, C.-C. Ho, Y.-J. Chang, C.-L Kuo, "Laser Drilling Assisted by a Discharged Plasma Torch", SLPC 2016, Yokohama, Japan, May 17-19, 2016.

92. 何昭慶、陳硯閔、陳璽宇，「旋渦噴流輔助雷射微加工之研究 」，中國機械工程學會第三十二屆全國學術研討會，國立高雄應用科技大學，2015年12月11-12日。

93. 何昭慶、邱信毓、謝易耘，「以機器視覺為基礎之三角膠線上缺陷檢測系統 」，中國機械工程學會第三十二屆全國學術研討會，國立高雄應用科技大學，2015年12月11-12日。

94. 王智源、張元震、何昭慶、許進成，「超快雷射加工藍寶石基板之訊號偵測」，中國機械工程學會第三十二屆全國學術研討會，國立高雄應用科技大學，2015年12月11-12日。

95. C.-C. Ho, J.-Y. Shen, Y.-J. Chang, J.-C. Hsu, and C.-L. Kuo, "The Study of the Controllable Swirling Gas Jet for Laser Percussion Drilling", Automation 2015, Taipei, Taiwan, November 11-15, 2015.

96. C.-C. Ho, G.-H. Lee, Y.-J. Chang, J.-C. Hsu, C.-L. Kuo and S.-K. Kuo, "Digital-Image-Correlation-Based Residual Strain Measurement Using Wire Electrical Discharge Machining", the International Conference on Computing and Precision Engineering, Taiwan, November 27-30, 2015.

97. Y.-Z. Hong, Y.-J. Chang, C.-L. Kuo, J.-C. Hsu, and C.-C. Ho, "A study of the application of micro stamping without a lower die to tapered bore forming," the International Conference on Computing and Precision Engineering, Taiwan, November 27-30, 2015.

98. C.-C. Ho, S.-T. Wu, Y.-M. Chen and C.-F. Yang, "Machine Vision System for in-process LED Chip Mounting,"  International Symposium on Measurement Technology and Intelligent Instruments (ISMTII 2015), Taipei, Taiwan, Sep 22- 25, 2015.

99. C.-C. Ho, G.-H. Lee, Y.-J. Chang, J.-C. Hsu, C.-L. Kuo and S.-K. Kuo, "Digital Image Correlation based Residual Stress Measurement Using Laser Hole Drilling, Xiamen, China, August 7- 12, 2015.

100. C.-C. Ho, Y.-H. Luo, Y.-J. Chang, J.-C. Hsu, and C.-L. Kuo, "Mask-assisted Laser Percussion Drilling," International Congress on Laser Advanced Materials Processing, Fukuoka, Japan, May 26- 29, 2015.

101. 何昭慶、陳柏岐、郭子鑫，「旋渦噴流輔助雷射微加工之研究 」，兩岸量測與檢測科技學術研討會(CSCMIT 2015)，中原大學，2015年3月20-21日。

102. 邱智睦、李冠宏、何昭慶，「以放射光感測訊號輔助變焦點加工」，第二十二屆全國自動化科技研討會，虎尾，雲林，2014年11月14號。

103. 邱智睦、沈克穎、何昭慶，「以放射光感測為基礎的雷射微細加工監測系統」，第二十二屆全國自動化科技研討會，虎尾，雲林，2014年11月14號。

104. C.-C. Ho, Y.-M. Chen, T.-Y. Chi and T.-H. Kuo, “Machine vision-based automatic placement system for solenoid housing," 18th International Conference on Mechatronics Technology (ICMT2014), Oct.21-24, Taipei, Taiwan.

105. C.-C. Ho, C.-M. Chiu, Y.-J. Chang, J.-C. Hsu, and C.-L. Kuo, "Optical emission monitoring for defocusing laser percussion drilling", Laser Metrology for Precision Measurement and Inspection in Industry (LMPMI) 2014. September 2nd- 5th, 2014, Tsukuba, Japan.

106. C.-C. Ho, P.-C. Chen and T.-H. Kuo, “Machine vision based on in-line defect inspection system,” in The 27th IPPR Conference in Computer Vison, Graphics, and Image Processing, August 17-19, 2014, Kenting, Taiwan.

107. Y. J. Chang, C. H. Chang, C. C. Ho, J. C. Hsu, C. L. Kuo, "Laser direct nano-structuring assisted by water droplets," IEEE-NEMS 2014, Hawaii, U.S.A. April 13-16, 2014 

108. C.-C. Ho, G.-R. Tseng, Y.-J. Chang, J.-C. Hsu and C.-L. Kuo, “Laser percussion drilling for highly reflective metals with external interdigital electrodes,” in 15th International Conference on Precision Engineering, July 22-25, 2014, Kanazawa city, Ishikawa, Japan.

109. C.-C. Ho, J.-J. He, J.-C. Hsu, Y.-J. Chang, and C.-L. Kuo, “On-line depth measurement for laser-drilled holes based on the intensity of plasma emission,” in 5th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN 2013), November12-15, 2013, Taipei, Taiwan.

110. C.-C. Ho, G.-R. Tseng, Y.-J. Chang, J.-C. Hsu and C.-L. Kuo, “Magnetic assisted laser percussion drilling,” in  International Applied Science and Precision Engineering Conference (ASPEC 2013), October 18-22, 2013, Sun Moon Lake, NanTou, Taiwan.

111. C.-C. Ho and D.-W. Kuo, "IEEE 1451-based sensor interfacing and data fusion for fire smoke detection," in the 11th International Symposium on Measurement Technology and Intelligent Instruments, Aachen, Germany, 2013.

112. Y. Chang, C. Chang, C. Ho, J. Hsu, and C. Kuo, "Nanostructure fabricated by laser direct writing with water droplets," in 8th IEEE International Conference on Nano/Micro Engineered and Molecular Systems (NEMS)，2013, pp. 1022-1025.

113. C.-C. Ho, J.-J. He, J.-C. Hsu, Y.-J. Chang, and C.-L. Kuo, “On-line monitoring of laser drilling process based on coaxial machine vision,” in International Conference on Innovative Design and Manufacturing, December 12-14, 2012, Taipei, Taiwan.

114. 何焌嘉、何昭慶、張元震、許進成、郭佳儱，「以機器視覺為基礎的雷射微加工狀態估測與診斷系統」，中國機械工程學會第二十九屆全國學術研討會，國立山中山大學，2012年12月7-8日。

115. 曾冠儒、郭佳儱、何昭慶、許進成、張元震，「電場偵測雷射鑽孔之研究」，中國機械工程學會第二十九屆全國學術研討會，國立山中山大學，2012年12月7-8日。

116. 張智帆、郭佳儱、何昭慶、張元震、許進成，「越障型球型機器人之基礎研究」，中國機械工程學會第二十九屆全國學術研討會，國立山中山大學，2012年12月7-8日。

117. 曾冠儒、郭佳儱、張元震、何昭慶、許進成，「電磁場輔助電漿量測與雷射加工之研究 」，2012 全國精密製造研討會，國立勤益科技大學，2012年11月9日。

118. 何昭慶、梁壹善，「高速雷射掃描振鏡系統開發研究」，2012 全國精密製造研討會，國立勤益科技大學，2012年11月9日。

119. 邱宥惠、何昭慶，「以聲學訊號基礎的火災偵測系統」，第二十屆全國自動化科技研討會，長庚大學，台北，2012年11月2號。

120. C.-C. Ho, T.-T. Tsai, and T.-H. Kuo, "IEEE 1451-based intelligent computernumerical control tool holder," in 2012 International Symposium on Computer, Consumer and Control, Taichung, Taiwan, 2012, pp. 767-770.

121. 林汶宥、郭佳儱、許進成、張元震、何昭慶，「脈衝噴流輔助雷射鑽孔加工之研究」，中國機械工程學會第二十八屆全國學術研討會，國立中興大學，2011年12月10-11日。

122. 何昭慶、蕭鈞煒，「以立體視覺為基礎之火災偵測與滅火系統」，中國機械工程學會第二十八屆全國學術研討會，國立中興大學，2011年12月10-11日。(NSC 98-2218-E-224-003, NSC100-2221-E-224-016)

123. 何昭慶、蔡宗廷，「以IEEE1451為基礎的智能型工具機刀座系統」，中國機械工程學會第二十八屆全國學術研討會，國立中興大學，2011年12月10-11日。

124. C.-C. Ho, J.-J. He, J.-C. Hsu, Y.-J. Chang, and C.-L. Kuo, "Machine-vision-based real-time breakthrough detection for laser drilling," presented at the The 11th International Conference on Automation Technology, Douliou, Yunlin, Taiwan, 2011.

125. C.-C. Ho and M.-C. Chen, "Nighttime fire smoke detection system based on machine vision," in The 10th International Symposium on Measurement Technology and Intelligent Instruments KAIST, Daejeon, Korea, 2011.

126. C.-C. Ho, T.-T. Tsai, C-H Lien, "Sensor system for monitoring the cutting signals of CNC milling machine in real time," in The 10th International Symposium on Measurement Technology and Intelligent Instruments KAIST, Daejeon, Korea, 2011.

127. 蔡宗廷、夏郭賢、何昭慶，「電腦散熱風扇FUZZY控制器設計」，十八屆模糊理論及其應用研討會、中華民國模糊學會、花蓮、國立東華大學、2010/12/03-04。

128. 何昭慶、連志豪、郭子鑫，「A sensor system for monitoring the working parameters of a machine tool spindle in real time」，第34屆全國力學會議，中華民國力學學會，國立雲林科技大學，2010年11月19-20日。(NSC 98-2218-E-224-003)

129. C.-C. Ho, "Design of machine learning-based smoke surveillance," in Proceedings of the  International Symposium on Mechanical Science and Technology, Guangzhou, China, Sep. 25-27, 2010. (EI) (NSC 98-2218-E-224-003)

130. C.-C. Ho, T.-H. Kuo, T.-T. Tsai, "Condition monitoring in a machine tool spindle using wireless sensor," in Proceedings of the13th International Symposium on Advances in Abrasive Technology, Taipei, Taiwan, Sep. 19-22, 2010. (EI) (NSC 98-2218-E-224-003)

131. C.-C. Ho, T.-H. Kuo, T.-T. Tsai, "A real-time condition monitoring system for a machine tool spindle," in Proceedings of the International Conference on Advanced Design and Manufacture, Nottingham, UK, Sep. 8-10, 2010. (EI) (NSC 98-2218-E-224-003)

132. C.-C. Ho, M.-C. Chen, C.-H. Lien, "Machine vision-based intelligent fire fighting robot," in Proceedings of the International Conference on Advanced Design and Manufacture, Nottingham, UK, Sep. 8-10, 2010. (EI) (NSC 98-2218-E-224-003)

133. 何昭慶，「以機器視覺為基礎之火災偵測與滅火系統」，第33屆全國力學會議，中華民國力學學會，國立聯合大學，2009年11月13-14日。(NSC 98-2218-E-224-003)

134. C.-C. Ho, "Image Processing Algorithm for Tracking and Picking an Object for an Open Platform Mobile Robot," in Proceedings of the International Conference on Advanced Design and Manufacture, Harbin Engineering University, Harbin, Sep. 24-26, 2009. (EI) (NSC 98-2218-E-224-003)

135. C.-C. Ho, "Stereo Vision Based Target Tracking and Obstacle Avoidance," in Proceedings of the International Conference on Advanced Design and Manufacture, Harbin Engineering University, Harbin, Sep. 24-26, 2009. (EI) (NSC 98-2218-E-224-003)

136. C.-C. Ho, "Machine Vision Based 3D Scanning System," in Proceedings of the International Conference on Electronic Measurement & Instruments (ICEMI), IEEE I&M Society, Beijing, vol. 4, pp.445-449, August 16-19, 2009. (EI) (98-2218-E-224-003)

137. C.-C. Ho and T.-H. Kuo, "Real-Time Video-Based Fire Smoke Detection System," in Proceedings of the IEEE/ASME Conference on Advanced Intelligent Mechatronics, IEEE Robotics and Automation Society, Singapore, July 14-17, 2009. (EI)

138. C.-C. Ho and C.L. Shih, "Machine Vision Based Tracking Control of a Ball-Beam System," The 8th International Symposium on Measurement Technology and Intelligent Instruments, Measurement Technology and Intelligent Instruments VIII (ISMTII 2007), Sendai, Japan, Sep. 24-27, 2007.

139. C.-C. Ho,C. L. Shih, "Real-Time Tracking and Stereo Vision-Based Control of a Goldfish-Catching System," Proceedings of the 35th International MATADOR Conference, pp.319-322 , 18-20, 2007.

140. Chao-Ching Ho, Ching-Long Shih, "A Stereo Vision Based Control System for Catching a Goldfish," Automation 2007 June 13-15, 2007.

141. 何昭慶、任紹棟、施慶隆, "A Stereo Vision Based System for Tracking Goldfish Trajectories,"第十四屆全國自動化科技研討會, 彰化, 2006.

142. 何昭慶、吳修明、施慶隆, "以機器視覺為基礎之球桿平衡控制系統," 第十四屆全國自動化科技研討會, 彰化, 2006.

143. 蔡東憲、何昭慶,"三角法影像量測系統參數之快速校正 (A rapid calibration process for acquiring the parameters of triangulation measurement system)"，樹德學報，第24期，民國88年8月 pp.1-12.

144. 范光照、何昭慶, "三維影像曲面量測疊合技術研究," 第八屆全國自動化科技研討會論文集, 台中, pp.785-792. 59, (1997.10).