How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want a featherweight, no-fuss pair of wired earbuds you can just plug in and forget about, choose Skullcandy Jib; if you need earbuds built specifically for smaller ears with a fuller accessory kit and a travel case, choose MOXKING Joymiso.
• Skullcandy Jib — biggest strength: Extremely light at 4 g with a straightforward 3.5 mm AUX plug, in-line mic, and call/track controls.
• Skullcandy Jib — biggest trade-off: Comes with only two ear gel sizes (S, M), so anyone outside that fit range may struggle to get a seal.
• MOXKING Joymiso — biggest strength: Six sizes of ear tips, a hard carrying case, and volume control, all aimed at small ears and kids.
• MOXKING Joymiso — biggest trade-off: Heavier at 15 g and listed with a Bluetooth field in its connectivity data, which is worth clarifying before you assume it's purely plug-and-play wired.
• Who Skullcandy Jib is for: Adults who want minimal weight, a simple wired connection, and basic call controls.
• Who MOXKING Joymiso is for: Kids, students, and people with small ears who want fit options and a case to keep everything together.
The Jib is about as simple as wired earbuds get, and that's the point. It's a 3.5 mm AUX plug-in pair with a 9 mm dynamic driver, a 16 ohm impedance rating, and a 20 Hz–20 kHz frequency range. In plain terms, that's a low-impedance design that's easy for a phone, laptop, or tablet to drive — you plug in and sound comes out. The in-line microphone lets you take calls without digging your phone out, and the inline control handles play, pause, and track skipping.
What stands out to me is the weight: 4 g. That's light enough that you'll barely notice them, and it makes the Jib a genuinely good pick for long listening sessions, commutes, or workouts where you don't want anything tugging at your ears. The noise-isolating fit depends on getting a good seal, and Skullcandy includes two ear gel sizes (S and M) to help you find it. A 1-year USA limited warranty rounds out the package.
Who should buy it? If you want a set of wired earbuds for a phone or laptop with a headphone jack, and you value low weight and simplicity over accessories, the Jib is a sensible choice. Who should skip it? If you have very small ears, or you need volume control on the cable itself, or you want a carrying case included, the Jib doesn't offer those things. It's also worth noting the fit is limited to two tip sizes — fine for many people, restrictive for others.
The Joymiso is designed around a very specific buyer: kids, students, and adults with smaller ears. The listing is explicit about that — "small ears" is right in the product name, and the description talks about a lightweight, ergonomic in-ear design that fits comfortably even for little ears. Where the Jib gives you two tip sizes, the Joymiso gives you six, which is a meaningful difference if standard tips have never sealed properly for you or your child.
Beyond fit, the Joymiso leans into practicality. There's a hard carrying case to keep the earphones and spare tips together, a tangle-free flat cable that's meant to survive being shoved in a backpack, and an in-line mic with volume control. It uses a balanced armature driver with a 20 Hz–20 kHz frequency range, and the description promises decent bass, clear vocals, and crisp treble across music, podcasts, audiobooks, videos, and games. Compatibility covers a wide range of 3.5 mm devices — older iPhones, iPads, MacBooks, Android and Windows phones, MP3 players, laptops, tablets, and Kindles — with the caveat that newer iPhones and USB-C devices need an adapter.
Two things to flag honestly. First, it weighs 15 g versus the Jib's 4 g — not heavy in absolute terms, but noticeably more substantial. Second, the connectivity data lists "Bluetooth" under wireless technology alongside the 3.5 mm jack, which is confusing given how the product is described as a plug-and-play wired set. If you're buying specifically because you want wired, that's a detail to verify on the product page rather than assume.
Who should buy it? Parents buying for school-age kids, anyone with small ear canals, and people who want spare tips and a case in the box. Who should skip it? If you want the absolute lightest possible earbuds or you're pairing with a device that only has USB-C or Lightning, you'll need an adapter and may prefer something simpler.
Side-by-Side: Which Should You Choose?
• Best for lowest weight → Skullcandy Jib. At 4 g it's roughly a quarter of the Joymiso's 15 g, which matters for all-day wear.
• Best for kids and school use → MOXKING Joymiso. The small-ear focus, tangle-free flat cable, and hard case are built for exactly that scenario.
• Best for cable-based volume control → MOXKING Joymiso. The Jib's inline control covers play, pause, and track skip, but volume control isn't listed.
• Best for a bare-bones plug-and-play setup → Skullcandy Jib. No case, no adapters, no extras — just a 3.5 mm plug and a mic.
• Best for accessories in the box → MOXKING Joymiso. Extra tips and a carrying case are included; the Jib ships with ear gels and a manual.
• Best for newer phones → neither without an adapter. Both are 3.5 mm wired, so Lightning and USB-C devices need an adapter.
• Best for warranty peace of mind → a tie. Both carry a 1-year warranty.
If I were buying for myself — an adult with average ears who just wants light, simple wired earbuds for a laptop or a phone with a headphone jack — I'd pick the Skullcandy Jib. The 4 g weight and the straightforward in-line mic and controls are exactly what I want from a pair like this, and I don't need six tip sizes or a case.
But if I were buying for a kid, or for anyone who has never gotten a comfortable seal from standard earbuds, I'd go with the MOXKING Joymiso. The six tip sizes, flat tangle-free cable, and included hard case solve real problems that the Jib simply doesn't address. That's the honest split here — it comes down to your ears and your use case, not to which brand is louder.
FAQ
how to earbuds in pairing mode
how to earbuds work
Wired earbuds like these convert an electrical audio signal from your device into sound through a driver inside each earpiece. The Jib uses a 9 mm dynamic driver with 16 ohm impedance and a 20 Hz–20 kHz range; the Joymiso uses a balanced armature driver with a 20 Hz–20 kHz range. Both rely on a good in-ear seal for noise isolation, which is why tip fit matters so much.
how to earbuds in ear
Insert the earbud so the tip sits comfortably inside your ear canal, then gently twist until it feels sealed but not painful. The Jib gives you two ear gel sizes (S, M), while the Joymiso includes six sizes — so if one set never seals well for you, the Joymiso gives you more chances to find a match. A proper seal is what delivers both the bass and the sound isolation these are designed around.
how to earbuds
If you mean how to use them day to day: plug the 3.5 mm jack into a compatible device, adjust the tip for a snug fit, and use the in-line controls for calls and playback. The Jib's control handles play, pause, and track skipping plus calls; the Joymiso adds cable-based volume control. For newer phones without a headphone jack, you'll need a Lightning or USB-C adapter.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: Sennheiser Accentum vs Skullcandy Sesh ANC XT: Top Rated, Wensdo Kids Headphone Bulk vs Skullcandy Method 360, Sony INZONE Buds vs Skullcandy Aviator 900