How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want a complete, ready-to-use wired earbud with an inline mic and a noise-isolating fit for call center shifts, choose Skullcandy Ink'd+; if you need replacement memory foam tips that upgrade the noise isolation and fit of in-ear monitors you already own, choose YINYOO 6.
• Skullcandy Ink'd+ biggest strength: A complete wired earbud — 3.5mm plug, built-in mic, call and track control, and a noise-isolating in-ear fit, all in one purchase.
• Skullcandy Ink'd+ biggest trade-off: It's a discontinued wired model with a fixed cable, so it only works with devices that still have a 3.5mm jack.
• YINYOO 6 biggest strength: Six pairs of memory foam tips (two each in S/M/L) that expand to your ear canal for stronger passive noise blocking than standard rubber tips.
• YINYOO 6 biggest trade-off: It's an accessory kit only — no earphones, no cable, no mic. You must already own compatible in-ear monitors.
• Who Skullcandy Ink'd+ is for: Anyone who wants an all-in-one wired headset for calls and music without buying anything else.
• Who YINYOO 6 is for: Owners of KZ-style in-ear monitors who want better isolation, comfort, and fit from the tips they already use.
The Ink'd+ is a wired in-ear headset built around one idea: plug in, and everything you need is already there. The 3.5mm jack connects to laptops, desk phones with a headphone port, tablets, and controllers without any pairing, charging, or setup. For a call center desk where a wired connection is the simplest, most reliable option, that matters more than any spec sheet number.
The inline remote handles call control plus play and skip, so you can answer a call or move through a queue of tracks without touching your phone. Skullcandy lists a noise-isolating fit, which means the rounded ear tips physically seal your ear canal to reduce surrounding chatter — passive isolation rather than active processing. Ear gel sizes are included so you can dial in that seal, and the seal is what actually does the noise-blocking work. The dynamic driver covers a 20 Hz–20,000 Hz range at 16 ohm impedance, which is easy for a phone or laptop to drive. The ABS housing and cobalt blue finish keep it light — the item weight is listed at 0.35 g — and it carries a 1-year manufacturer warranty.
Who should buy it: commuters, students, and call center staff who want a corded headset with an inline mic and don't want to manage batteries or Bluetooth pairing. It's also the smarter pick if you dislike charging yet another device.
YINYOO 6: Who It's For
The YINYOO 6 is not a headset. It's a six-pair kit of KBEAR KF01 memory foam ear tips in small, medium, and large — two pairs of each — packed in a small plastic case. If you already own in-ear monitors like the KZ ZS10 Pro, ZS10 Pro X, ZSN Pro X, Castor, or EDX Pro, this is the upgrade that changes how they feel and how much outside noise they shut out.
Here's the design logic. Memory foam compresses when you roll it, then rebounds over about 30 seconds to fill the shape of your ear canal. That expansion creates a more complete seal than a silicone tip that just sits at the opening, which is why foam tends to block more external noise. A built-in soft tube inside the tip balances ear pressure and softens harsh high frequencies, which pushes mid-range detail forward — useful if you find your IEMs a little sharp or thin. The vent hole design further reduces pressure buildup, so long listening sessions stay comfortable. The ergonomic shape is molded to follow the natural curve of the ear canal, and the kit fits different ear shapes across its three sizes.
Who should buy it: IEM owners chasing better isolation, a more secure fit during movement, and more comfortable long-wear sessions. If your current tips slip, leak sound, or ache after an hour, foam is the fix.
Who should skip it: anyone who doesn't own compatible in-ear monitors, since the kit contains tips only. Also skip if you want the convenience of silicone for constant on-and-off removal — memory foam has adhesive properties, so you need to be careful when pulling them off to avoid tearing. The kit carries a 3-month warranty.
Side-by-Side: Which Should You Choose?
• Best for a complete call center setup → Skullcandy Ink'd+: mic, inline controls, and cable included in one product.
• Best for wired reliability with zero charging → Skullcandy Ink'd+, since the 3.5mm connection never needs a battery.
• Best for passive noise blocking on loud floors → YINYOO 6, because expanding memory foam seals deeper than standard rubber tips.
• Best lightweight bluetooth earbuds for call center → Neither one: both are wired or accessory-only, so look elsewhere if you need Bluetooth.
• Best for deep bass in ear headphones for call center → Pair YINYOO 6 tips with a bass-forward IEM; the Ink'd+ driver covers 20 Hz–20,000 Hz but the foam seal is what tightens low-end response.
• Best for neckband headphones for call center → Neither fits that form factor; the Ink'd+ is a straight wired in-ear, not a neckband.
• Best for long shifts without ear fatigue → YINYOO 6, thanks to the vent hole and pressure-balancing soft tube designed for extended wear.
For a call center job, I'd buy the Skullcandy Ink'd+. It's the only one of the two that is an actual headset — mic, call control, and track control on the cable — and the noise-isolating in-ear fit plus included ear gel sizes give you passive blocking without charging anything. The YINYOO 6 is the better buy only if you already own in-ear monitors and specifically want foam tips for deeper isolation and long-wear comfort. In my opinion, the Ink'd+ wins for anyone who wants one product that just works out of the box. Check the current price on Amazon, since the model is listed as discontinued.
how to noise cancelling earbuds
True active noise cancelling uses electronics to counteract outside sound. Both products here rely on passive isolation instead: the Ink'd+ uses a sealing in-ear tip, and the YINYOO 6 uses memory foam that expands to fill your ear canal and block more external noise than silicone.
how to noise cancelling earbuds work
Active cancellation samples ambient sound and plays an inverted signal to cancel it. Passive isolation — what these two products offer — simply creates a physical seal. The Ink'd+ seals with its rounded tips, while the YINYOO 6 foam rebounds over about 30 seconds to fit the shape of your ear canal.
how to use noise cancelling earbuds
To get the most isolation, insert the tip so it seals the canal, then let it settle. With the Ink'd+, try the included ear gel sizes until chatter fades. With the YINYOO 6, roll the foam, insert, and hold briefly while it expands — the vent hole keeps pressure comfortable.
how to noise cancelling earbuds apple
Apple devices with a 3.5mm jack work directly with the Skullcandy Ink'd+; newer iPhones without that port need an adapter. The YINYOO 6 is not an audio device at all — it's a foam tip kit for in-ear monitors, so it only applies if you already own compatible IEMs.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: SleepPhones AcousticSheep Classic vs Sunoony CD Player, FashionLive Hat Music Beanie vs elago Armor Case, CURVD Ear Plugs vs GEEKRIA USB-C: Noise Isolating Sleep, OYIB Earbuds vs MSHUKCOE Mini Invisible Headphones