Single Cylinder Press Brake in Alabama

Single Cylinder Press Brake in Alabama - GSS Machinery

Standard Industrial press brakes can handle full tonnage for the entire stroke, the length of the bed, and the entire length the ram. Standard Industrial press brakes are more repeatable than dual cylinder brakes, which require complex hydraulic systems to balance their tonsnage. The labor required to maintain press brakes from competitors is extensive. For parts and labor they cannot get from a manufacturer, businesses pay exorbitant rates. Click here to find out the secrets behind Standard Industrial's Guidance Hydraulic Press Brake System / 3-Point Gibbing.

Most press brakes work in the middle of the press. Standard Industrial press brakes can be used to apply substantial force at the ends of the brake when they are not designed for center loading.

The torque tube brake is another variant of the dual-cylinder machine. It has two cylinders that generate half the machine's total tonnage. Torque tube brakes don't generate full tonnage throughout the brake bed; they only produce full tonnage at the brake center. Torque tube brakes pull tonnage from each of the cylinders, which can lead to distortion due to off-center loading and full length bends. Standard Industrial single-cylinder brakes do not require balancing between cylinders. There are no complex hydraulic systems that compensate for each cylinder's weaknesses. A single cylinder can provide full tonnage on the brake, so you can achieve a repeat accuracy of +/ *.001' regardless of where you work.