PUBLICATION

PUBLICATIONS [ SCI papers ] (download link) : Google scholar(Prof.Changwoo Lee)

1. Mitigating strain deviation by investigating tension transfer mechanisms dependent on anode shape in roll‑to‑roll electrode fabrication.,
  Structural and Multidisciplinary Optimization, Vol. 68, 184, 2025. [JCR Top 17.1%]
2. Control of Fluctuational Tension in Roll-to-Roll Manufacturing Systems under Acceleration and Deceleration Conditions., ("Best Paper Award")
  International Journal of Precision Engineering and Manufacturing-Green Technology, Vol.12, Issue 4, pp.1159-1174, 2025. 07 [JCR Top 9.4%]
3. Development of a thickness prediction model for the coffee-staining effect based on the ink spreadability of a tensioned web.,
  Surfaces and Interfaces, Vol.65, pp.106533, 2025.05 [IF : 5.7, JCR Top 17.3%]
4. Thermal wrinkling in anode production: Defect analysis and mitigation strategies,
  Journal of Manufacturing Process,Vol 141, pp.81-92, 2025. 05 [IF: 6.1, JCR Top 17.6%]
5. Predicting Quality of Coated Layer Based on Meniscus Features Associated with Thickness for Sustainable Roll-to-Roll Processes., ("Best Paper Award")
  International Journal of Precision Engineering and Manufacturing-Green Technology, Vol.12. Issue 3,pp.813-828, 2025.05 [IF: 5.3, JCR Top 9.4%]
6. Data-Driven Fault Detection and Positioning of Eccentric Rolls in Roll-to-Roll Systems Using Wrap Angle and Sensor Proximity,
  Results in Engineering, Vol.24, pp.103629, 2024.12 [IF 6.0 , JCR Top 5.52%], Open Acess
7. Advanced Taper Tension Profile for Improved Control Performance in Roll-to-Roll Winding Processes,
  Alexandria Engineering Journal, Vol.104, pp. 279-291, 2024.10 [IF 6.2 , JCR Top 5.02%], Open Access
8. Tailoring threshold voltage of R2R printed SWCNT thin film transistors for realizing 4 bit ALU,(Co-Author)
  npj Flexible Electronics, Vol.8, Article No. 78, 2024.11 [IF 12.3 , JCR Top 1.98%], Open Access
9. Structural Optimization of Scarfing Machine with Acceleration Profile and Multi-Objective Genetic Algorithm Approach,
  Machines, Vol.12. Issue.6, pp. 398, 2024.06. [IF 2.1 , JCR Q2], Open Access
10. Image Data-Centric Visual Feature Selection on Roll-to-Roll Slot-Die Coating Systems for Edge Wave Coating Defect Detection,
  Polymers, Vol.16. Issue.8, pp. 1156, 2024.04. [IF 4.7 , JCR Top 19.14%], Open Access
11. Textile vision data-centric approach for control of NaOH concentration in roll-to-roll mercerizing system,
  Measurement, Vol.229, pp.114430, 2024. 04. [IF 5.2 , JCR Top 9.49%], Open Access
12. Control of Meniscus Formation Using an Electrohydrodynamics Module in Roll-to-Roll Systems for Stable Coating of Functional Layers,
  Polymers, Vol.16. Issue.6, pp. 845, 2024.03. [IF 5.0 , JCR Top 19.14%], Open Access
13. Control Methodology for Tensioned Web considering Thermal Behavior in Roll-to-roll Manufacturing Systems,
  Engineering Science and Technology-an International Journal, Vol.46, pp.101508. 2023. 10. [IF 5.1 , JCR Top 10.05%], Open Access
14. Enhancing Diagnosis of Rotating Elements in Roll-to-Roll Manufacturing Systems through Feature Selection Approach Considering Overlapping Data Density and Distance Analysis,
  Sensors, Vol.23, No.18, pp.7857. 2023.09 [IF 3.9 , JCR Q2], Open Access
15. Layer-by-Layer Engineered Flexible Functional Film Fabrication with Spreadability Control in Roll-to-Roll Manufacturing,
  Polymers, Vol.15. Issue.11, pp. 2478. 2023.05. [IF 5.0 , JCR Top 17.8%], Open Access
16. A quantitative diagnostic method of feature coordination for machine learning model with massive data from rotary machine,
  Expert Systems with Applications, Volume 214, pp.119117, 2023.03 [IF 7.5 , JCR Top 5.66%] Open Access
17. Web Wrinkle Defects due to Temperature Profile in Roll-to-Roll Manufacturing Systems,
  Polymers, 15(2), pp.457, 2023.01 [IF 5.0 , JCR Top 17.8%] Open Access
18. Classification and Redundancy Quantitative Evaluation Algorithm for Highly Efficient Fault Diagnosis of Rotary Machines in Roll-to-Roll systems,
  Measurement, Volume 206, pp.112292, 2023.01 [IF 5.2 , JCR Top 9.49%] Open Access
19. Advanced tension model for highly integrated flexible electronics in roll-to-roll manufacturing,
  IEEE/ASME Transactions on Mechatronics, 27(5), pp. 2908-2917, 2022.10 [IF 6.1 , JCR Top 5.0%]
20. Strain optimization of tensioned web through computational fluid dynamics in the roll-to-roll drying process,
  Polymers 2022, 14(12), 2515, 2022.06 [IF 5.0 , JCR Top 17.8%] Open Access
21. Feature Selection Algorithm Based on Density and Distance for Fault Diagnosis Applied to a Roll-to-Roll Manufacturing System,
  Journal of Computational Design and Engineering, 9(2), pp. 805-825, 2022.04 [IF 6.16 , JCR Top 10%] Open Access
22. Effect of Radial Stress on the Nanoparticle-Based Electrolyte Layer in a Center-Wound Roll with Roll-to-Roll Systems
  Nanomaterials 2022, 12(6), 1014, 2022.03 [IF 5.71 , JCR Q1] Open Access
23. Tool-condition diagnosis model with shock sharpening algorithm for drilling process,
  Sensors 2022, 22(5), 1975, 2022.03 [IF 3.9 , JCR Q1] Open Access
24. Morphology Engineering for Compact Electrolyte Layer of Solid Oxide Fuel Cell with Roll-to-Roll Eco-production,
  International Journal of Precision Engineering and Manufacturing-Green Technology, 9(2), pp.431-441, 2022.03 [JCR Top 6.6%]
25. Achieving specified geometric quality in a fully printed flexible functional layer using process parameters in roll-to-roll printed electronics,
  Flexible and Printed Electronics, 7(1), 014007, 2022.03 [JCR Q2]
26. Impact of Sensor Data Characterization with Directional Nature of Fault and Statistical Feature Combination for Defect Detection on Roll-to-Roll Printed Electronics
  Sensors 2021, 21(24), 8454, 2021.12 [JCR Q1] Open Access
27. Transmittance control of water-repellent coated layer on tensioned web in roll-to-roll slot-die coating system,
  Polymers 2021, 13(22), 4003, 2021.11 [JCR Top 17.8%] Open Access
28. Resistance Control of an Additively Manufactured Conductive Layer in Roll-to-Roll Gravure Printing Systems,
  International Journal of Precision Engineering and Manufacturing-Green Technology, 8(3), pp.817-828 , 2021.05 [JCR Top 6.6%]
29. Residual interfacial deformation in flexible copper clad laminate occurring during roll-to-roll composite film manufacturing,
  International Journal of Precision Engineering and Manufacturing-Green Technology, 8(3), pp.805-815 , 2021.05 [JCR Top 6.6%]
30. Fault diagnosis based on the quantification of the fault features in a rotary machine,
  Applied Soft Computing, Vol. 97, Part B, 106726, 2020.12 [JCR Top 8.2%] Open Access
31. Numerical modeling of ink widening and coating gap in roll-to-roll slot-die coating of solid oxide fuel cell electrolytic layer,
  Polymers 2020, 12(12), 2927, 2020.12 [JCR Q1] Open Access
32. Web Unevenness due to Thermal Deformation in Roll–to–Roll Manufacturing Process,
  Applied Sciences 2020, 10(23), 8636, 2020.12 [JCR Q2] Open Access
33. Optimal Design of Pneumatic Flotation for Roll-to-Roll Conveyance in the Production of Printed Circuits,
  Applied Sciences 2020, 10(16), 5440, 2020.08 [JCR Q2] Open Access
34. Fabrication of thickness-controllable double layer electrolyte using roll-to-roll additive manufacturing system,
  International Journal of Precision Engineering and Manufacturing-Green Technology, 7(3) pp.635-642 , 2020.05 [JCR Top 6.9%]
35. Theories and Control Technologies for Web Handling in the Roll-to-Roll Manufacturing Process,
  International Journal of Precision Engineering and Manufacturing-Green Technology, 7(2) pp 525–544, 2020.03 [JCR Top 6.9%]
36. Taper Tension Profile in roll-to-roll Rewinder: Improving Adhesive Force of Pressure-Sensitive Adhesive Film,
  International Journal of Precision Engineering and Manufacturing-Green Technology, 6(5), pp. 853-860, 2019.10 [JCR Top 6.9%]
37. Computational fluid dynamics model for thickness and uniformity prediction of coating layer in slot-die process,
  International Journal of Advanced Manufacturing Technology, 104(5) pp.2991-2997, 2019.10 [JCR Q2]
38. Large Area Electrolyte Coating through Surface and Interface Engineering in roll-to-roll Slot-die Coating Process,
  Journal of Industrial and Engineering Chemistry, 76 pp.443-449, 2019.08 [JCR Top 10.8%]
39. Surface Drying for Brittle Material Coating without Crack Defects in Large-area roll-to-roll Coating System,
  International Journal of Precision Engineering and Manufacturing-Green Technology, 6(4) pp.723-730, 2019.08 [JCR Top 6.9%]
40. Model-Based Winding Tension Profile to Minimize Radial Stress in a Flexible Substrate in a Roll-to-Roll Web Transporting System,
  IEEE-ASME Transactions on Mechatronics, 23(6) pp.2928-2939, 2018.12 [JCR Top 5.3%]
41. Improvement of a Splicing Machine to Decrease Abrupt Tension Changes and Tail Defects during the Roll Exchange Process in a Roll-to-Roll Manufacturing system,
  International Journal of Precision Engineering and Manufacturing, 19, pp. 1155-1161, 2018.08
42. Stresses and Defects in Roll Products: A Review of Stress Models and Control Techniques,
  International Journal of Precision Engineering and Manufacturing, 19(8), pp.781-789. 2018.05
43. An Analysis of Pinned Edge Layer of Slot-Die Coated Film in Roll-to-Roll Green Manufacturing System,
  International Journal of Precision Engineering and Manufacturing-Green Technology, 5(2) pp. 247-254. 2018.04 [JCR Top 6.9%]
44. Contact angle control of sessile drops on a tensioned web,
  Applied Surface Science, 437, pp.329-335. 2018.04 [JCR Top 4.7%]
45. Effect of Radial Stress on the Adhesive Force of a Wound Roll in Industrial Roll-to-Roll Manufacturing system,
  International Journal of Precision Engineering and Manufacturing, 19(3), pp.411-415. 2018.03
46. Approach to optimizing printed conductive lines in high-resolution roll-to-roll gravure printing,
  Robotics and Computer-Integrated Manufacturing, 46, pp.122-129. 2017.08 [JCR Top 4.14%]
47. Multi-response optimization of R2R gravure printing using orthogonal array and principal component analysis as a weighting factor,
  International Journal of Advanced Manufacturing Technology, 90, pp.3595-3606. 2017.06 [JCR Q2]
48. Roll-to-Roll Coating Technology and Its Applications : A Review,
  International Journal of Precision Engineering and Manufacturing, 17(4), pp.537-550. 2016.04
49. An advanced model for the numerical analysis of the radial stress in center-wound rolls,
  International Journal of Mechanical Sciences, 105, pp.360-368. 2016.01 [JCR Top 2.94%]
50. A 250-mm width, flexible, and continuous roll-to-roll slot-die coated carbon nanotube/silver nanowire film fabrication and a study on the effect of anti-reflective overcoat,
  Thin Solid Films, 598, pp.95-102. 2016.01
51. An Investigation of the Ink-Transfer Mechanism during the Printing Phase of High-Resolution Roll-to-Roll Gravure Printing,
  IEEE Transactions on Components Packaging and Manufacturing Technology, 5(4), pp.1516-1524. 2015.10
52. Effect of nip force on ink transfer in high resolution roll-to-roll printing,
  International Journal of Precision Engineering and Manufacturing Technology, Vol.16, No.3, pp.517-523. 2015.03
53. Improvement of Cross-Machine Directional Thickness Deviation for Uniform Pressure-Sensitive Adhesive Layer in Roll-to-Roll Slot-Die coating Process,
  International Journal of Precision Engineering and Manufacturing Technology, Vol.16, No.5, pp.937-943. 2015.05
54. Novel approach to predict The Varying Thicknesses of a PVA film During a Roll-to-roll process,
  International Journal of Mechanical Sciences, Vol.92, pp.52-69. 2015.03 [JCR Top 10.3%]
55. Analysis of Dynamic Thermal Characteristic of Register of Roll-to-roll multi-layer printing systems,
  Robotics and Computer-Integrated Manufacturing, Vol.35, pp.77-83. 2015.01 [JCR Top 4.14%]
56. Effect of Tension on Conductivity of Gravure Printed Ag layer in Roll-to-Roll process,
  International Journal of Precision Engineering and Manufacturing Technology, Vol.16, No.1, pp.99-104. 2015.01
57. Optimized Design for Anti-Reflection Coating Process in Roll-to-Roll Slot-Die Coating system,
  Robotics and Computer-Integrated Manufacturing, Vol.30, No.5, pp.432-441. 2014.10 [JCR Top 4.14%]
58. A Mathematical Model to predict Surface Roughness and Pattern Thickness in Roll-to-roll Gravure printed Electronics,
  Robotics and Computer-Integrated Manufacturing, Vol.29, No.4, pp.26-32. 2013.08 [JCR Top 4.14%]
59. Modeling and Compensation of the Machine Directional Register in Roll-to-Roll printing,
  Control Engineering Practice, Vol.21, No.5, pp.645-654. 2013.05
60. Advanced Taper Tension Method for The Performance Improvement of a Roll-to-Roll Printing Production line with a Winding process,
  International Journal of Mechanical sciences, Vol.59, No.1, pp.61-72. 2012 [JCR Top 4.14%]
61. R2R Gravure and Inkjet Printed RF Resonant Tag,
  Microelectronic Engineering, 88(11), 2011.
62. Novel Modeling of Correlation between Two-dimensional Register in Large-area multi layered Roll-to-Roll printed electronics,
  Japanese Journal of Applied Physics, 50(1), 2011
63. Modeling and Matching Design of a Tension Controller using Pendulum Dancer in Roll-to-Roll systems,
  IEEE Transactions on Industrial Application, 47(4), 2011
64. A Novel Method to Guarantee the Specified Thickness and Surface Roughness of the Roll-to-roll Printed Patterns Using the Tension of a Moving Substrate,
  Journal of Microelectromechanical Systems, 19(5), 2010
65. Noble Logic for Preventing Scratch on Roll-to-Roll Printed Layers in Non contacting Transportation,
  Japanese Journal of Applied Physics, 49(5), 2010
66. A Study on Tension Behavior Considering Thermal effects in Roll-to-Roll E-Printing,
  Journal of Mechanical Science and Technology, 24(5), 2010
67. A Novel Cross Directional Register Modeling and Feed forward Control in Multi-layer Roll-to-Roll Printing,
  Journal of Process Control, 20(5), 2010
68. A Study on Taper Tension Control Considering telescoping in the Winding System,
  IEEE Transactions on Industrial Application, 46(2), 2010
69. Quality Control with Matching Technology in Roll-to-Roll Printed Electronics,
  Journal of Mechanical Science and Technology, 24(1), 2010
70. Effect of Taper Tension Profile on the Telescoping in a Winding Process of High speed Roll to Roll printing systems,
  Journal of Mechanical Science and Technology, 23(11), 2009
71. A Study on the Tension Estimator by Using Register Error in a Printing Section of Roll to Roll e-Printing Systems,
  Journal of Mechanical Science and Technology, 23(1),2009
72. Development of a guiding system and visual feedback real-time controller for the high-speed self-align optical cable winding,
  Journal of Mechanical Science and Technology, 22(12), 2008
73. A Taper Tension Profile Maker in a converting machine,
  Journal of Mechanical Science and Technology, 22(1), 2008
74. Fault diagnosis of roll shape under the speed variation in hot rolling mill,
  Journal of Mechanical Science and Technology, 20(9), 2006
75. Strip Tension Control Considering the Temperature Change in Multi-Span Systems,
  Journal of Mechanical Science and Technology, 19(4), 2005
76. A Study on the Fault Diagnosis of the 3-D Roll Shape in Cold Rolling,
  Journal of Mechanical Science and Technology, 18(12), 2004

PUBLICATIONS [ SCOPUS papers ] (Download link)

1. Degradation Pattern Classification for Predicting Remaining Useful Life of Rolling-element Bearings, 한국정밀공학회지, 41(12), pp.973-990, 2024.12
2. 딥 러닝을 활용한 공구 상태 진단,(우수논문선정) 한국정밀공학회지, 37(6), 2020.06
3. 통계적 최적화 기법을 이용한 전해질 코팅 품질 개선, 한국정밀공학회지 ,36(2), 2019.02
4. 레이더 쉘터 내부 열원 배치 구조에 따른 온도 변화의 전산 유체 역학적 분석, 한국정밀공학회지 36(2), 2019.02
5. 초정밀 대형 머시닝센터의 바닥 지반 설계에 관한 연구, 한국정밀공학회지, 35(6), 2018.01
6. 3D 프린터를 이용한 PDMS 기반 슬롯-다이 Coater 제작에 관한 연구, 34(8), 2017.08
7. 롤투롤 시스템에서 플렉시블 소재에 인가된 장력과 분사 높이가 액적 접촉각에 미치는 영향, 한국정밀공학회지, 34(3), 2017.04
8. 경험적 모드 분해법과 인공 신경 회로망을 적용한 베어링 상태 분류 기법, 한국정밀공학회지. 33(12), 2016.12
9. CFD 해석을 이용한 롤투롤 슬롯-다이 내부 유동 분석 및 최적화, 한국정밀공학회지, 33(8), 2016.08
10. 데이터 마이닝 기법 및 경험적 모드 분해법을 이용한 회전체 이상 진단 알고리즘 개발에 관한 연구, 한국기계가공학회지, 2016.08
11. 롤투롤 와인딩 시스템에서 소재 특성을 고려한 반경 방향 응력에 대한 연구, 한국정밀공학회지, 33(2), 2016.02
12. 롤투롤 시스템에서 감김롤 내부 잔류응력 최소화를 위한 테이퍼 장력 설정기법, 한국정밀공학회지, 32(12), 2015.12
13. 대면적 탄소나노튜브/은나노와이어 투명전극필름 롤투롤 연속생산시스템, 한국정밀공학회지, 32(8), 2015.08
14. 대면적 롤투롤 슬롯-다이 코팅의 횡 방향 두께 품질 개선을 위한 공정 파라미터 분석, 한국정밀공학회지, 32(2), 2015.02
15. 하이포이드 하이레이셔 기어를 이용한 감속기 설계에 대한 연구, 한국정밀공학회지, 13(6), 2014.12
16. 롤투롤 인쇄 전자 시스템에서 건조 온도와 유연기판의 열변형간 상관관계에 대한 연구, 한국정밀공학회지, 31(8), 2014.08
17. 롤투롤 와인딩 시스템에서 테이퍼 장력과 감김롤 응력분포에 관한 연구, 한국정밀공학회지, 31(2), 2014.02
18. 롤투롤 슬롯-다이 대면적 코팅 공정 최적화를 위한 통계적 모델링 방법, 한국기계가공학회지, 12(5), 2013.10
19. 롤투롤 인쇄 전자 시스템에서 유연기판의 열변형을 고려한 웹의 장력거동 분석, 한국기계가공학회지, 12(5), 2013.10
20. 롤투롤 인쇄전자 시스템에서 인쇄패턴의 두께와 표면조도에 관한 통계적 분석, 대한기계학회지, 37(3), 2013.03
21. 롤투롤 전자인쇄 시스템에서 Nip Roll의 특성에 따른 인쇄 패턴의 품질에 대한 매칭기술, 대한기계학회지, 36(2), 2012.02
22. 롤투롤 시스템에서의 비 접촉 이송 시스템을 위한 수학적 장력 모델에 관한 연구, 제어로봇시스템학회지, 15(9), 2009.09
23. 롤투롤 공정의 인쇄 후 구간에서 변형률과 인쇄한 패턴의 전기 전도도와의 관계에 대한 연구, 제어로봇시스템학회지, 15(9), 2009.09
24. 롤투롤 인쇄 기술을 이용한 전자소자 개발, 대한기계학회지, 49(8), 2009.08