Recent papers

Recent papers (2015~)

31. G.-S. Chae, H.-W. Park, K. Kwon, S. Shin†, “Comparative study of the impact wedge-peel performance of epoxy structural adhesives modified with surface functionalized silica nanoparticles”, Polymers 13, 469 (2021).

30. N. Kim, S. Shin, S.W. Bae†, “cAMP Biosensors Based on Genetically Encoded Fluorescent/Luminescent Proteins”, Biosensors 11, 39 (2021).

29. Y.S. Choi, H.-J. Choi, S. Shin, S.W. Bae†, “Rapid “Naked-Eye” detection of fluoride ions using a reaction-based ratiometric colorimetric probe“, Bull. Korean Chem. Soc., (2020). Accepted. https://doi.org/10.1002/bkcs.12174.

28. H.-W. Park, H.-S. Seo, K. Kwon, J.H. Lee, S. Shin†, “Enhanced Heat Resistance of Acrylic Pressure-Sensitive Adhesive by Incorporating Silicone Blocks Using Silicone-Based Macro-Azo-Initiator”, Polymers, 12, 2410 (2020).

27. H.-W. Park, M. Toan, H.-J. Kim, J.H. Lee, S. Shin†, “Renewable epoxy thermosets with extremely high biomass content from furan derivatives and their flame retardancy”, J. Ind. Eng. Chem., 92, 184-190 (2020).

26. H.-W. Park, H.-S. Seo, J.H. Lee, S. Shin†, “Adhesion improvement of the acrylic pressure-sensitive adhesive to low-surface-energy substrates using silicone urethane dimethacrylates”, Eur. Polym. J., 137, 1009949 (2020).

25. G.-S. Chae, H.-W. Park, J.H. Lee, S. Shin†, “Comparative study on the impact wedge-peel performance of epoxy-based structural adhesives modified with different toughening agents”, Polymers, 12, 1549 (2020).

24. K.-M. Kim, H.-W. Park, G.-S. Shim, S.-W. Jang, H.-J. Kim†, G.-S. Chae, S. Shin†, J.-H. Lee, “Mechanical properties and decomposition performance of peelable coating containing UiO-66 catalyst and waterborne silane-terminated polyurethane dispersions”, J. Mater. Sci., 55, 2604-2617 (2020).

23. T. Nguyen, Y.J. Kim, S.-K. Park, K.-Y. Lee, J.-Y. Park, J.K. Cho, S. Shin†, “Furan-2,5- and Furan-2,3-dicarboxylate Esters Derived from Marine Biomass as Plasticizers for Poly(vinyl chloride)”, ACS Omega, 5, 197-206 (2020).

22. M. Toan, J.-W. Park, H.-J. Kim, S. Shin†, “Synthesis and characterization of a new phosphorus-containing furan-based epoxy curing agent as a flame retardant”, Fire and Materials, 43, 717-724 (2019).

21. J.-W. Park, J.-U. Hwang, J.-H. Back, S.-W. Jang, H.-J. Kim†, P.-S. Kim, S. Shin, T. Kim, ” High strength PLGA/Hydroxyapatite composites with tunable surface structure using PLGA direct grafting method for orthopedic implants”, Composites Part B, 178, 107449 (2019).

20. N.H. Long, H.-W. Park, G.-S. Chae, J.H. Lee, S.W. Bae, S. Shin†, “Preparation of peelable coating films with a metal organic framework (UiO-66) and self-crosslinkable polyurethane for the decomposition of methyl paraoxon”, Polymers, 11, 1298 (2019).

19. K. Kim, J.Y. Seo, K.-Y. Baek, J.-Y. Bae, S. Shin†, “Metal-organic framework (UiO-66)-dispersed PU composite films for the decontamination of methyl paraoxon”, Polym. Int., 68, 1502-1508 (2019).

18. J.-W. Park, K.-B. Sim, G.-S. Shim, J.-H. Back, D. Baek, H.-J. Kim†, S. Shin, “Depth profile of thin coating through surface and interfacial cutting analysis of UV curing system”, Materials and Design, 178, 107855 (2019).

17. H.-W. Park, J.-W. Park, J.H. Lee, H.-J. Kim, S. Shin†, “Property modification of a silicone acrylic pressure-sensitive adhesive with oligomeric silicone urethane methacrylate”, Eur. Polym. J., 112, 320-327 (2019).

16. Y. Moon, A.T. Jafry, S.B. Kang, J.Y. Seo, K.-Y. Baek, E.-J. Kim, J.-G. Pan, J.-Y. Choi, H. Kim, K.H. Lee, K. Jeong, S. Shin, J. Lee†, Y. Lee†, “Organophosphorus hydrolase-poly-b-cyclodextrin as a stable self-decontaminating bio-catalytic material for sorption and degradation of organophosphate pesticide”, J. Hazard. Mater., 365, 261 (2019).

15. J.S. Kim, H.W. Park, J.-H. Lee, S.-H. Lee, J.K. Cho, S. Shin†, “Synthesis of a novel isosorbide-based dental material with improved water sorption”, Eur. Polym. J., 112, 629-635 (2019).

14. C.A. Antonyraj, N.T.T. Huynh, K.W. Lee, Y.J. Kim, S. Shin, J.S. Shin, J.K. Cho†, “Base-free oxidation of 5-hydroxymethyl-2-furfural to 2,5-furan dicarboxylic acid over basic metal oxide-supported ruthenium catalysts under aqueous conditions”, J. Chem. Sci., 130, 156 (2018).

13. T. Nguyen, B. Kim, Y.-J. Kim, S.-H. Lee, S. Shin†, J.K. Cho†, “Synthesis of the bio-based alternative to Bis-GMA and its application to photo-polymerizable adhesives”, Int. J. Adhes. Adhes., 80, 60-65 (2018).

12. C.A. Antonyraj, N.T.T. Huynh, S.-K. Park, S. Shin, Y.J. Kim, S. Kim, K.-Y. Lee, J.K. Cho†, “Basic anion-exchange resin (AER)-supported Au-Pd alloy nanoparticles for the oxidation of 5-hydroxymethyl-2-furfural (HMF) into 2,5-furan dicarboxylic acid (FDCA)”, Appl. Catal. A: General, 547, 230-236 (2017).

11. S. Shin†, Y.-J. Kim, M. Toan, J.-G. Kim, T. Nguyen, J.K. Cho“Property enhancement of dental composite prepared with an isosorbide-based photocurable compound by mixing with TEGDMA”, Eur. Polym. J., 92, 338-345 (2017).

10. H.J. Oh, J.G. Jang, J.-G. Kim, J.-I. Hong, J. Kim, J. Kwak, S.H. Kim†, S. Shin†, “Structural and Morphological Evolution for Water-resistance Organic Thermoelectrics”, Sci. Report, 7, 13287-1-13287-8 (2017).

9. D. Mun, N.T. Huynh, S. Shin, Y.J. Kim, S. Kim, Y.-G. Shul, J.K. Cho, “Facile isomerization of glucose into fructose using anion-exchange resins in organic solvents and application to direct conversion of glucose into furan compounds”, Reserch on Chem. Inter., 43, 5495 (2017).

8. J.-W. Park, G-.S Shim, J.-H. Back, H.-J. Kim†, S. Shin, T.-S. Hwang, “Characteristic shrinkage evaluation of photocurable materials”, Polymer Testing, 56, 344-353 (2016).

7. J.-W. Park, S-J. Lee, H.-W. Jung, H.-S. Ahn, H.-J. Kim†, J.K. Cho, B. Kim, S. Shin†, T.-S. Hwang, “Evaluation of soft adhesives containing dual-curable melamine-based compounds”, Int. J. Adhes. Adhes., 70, 315-321 (2016).

6. D.S. Nguyen, J. K. Cho, S. Shin, D.K. Mishra, Y.J. Kim, “Reusable Polystyrene-Functionalized Basic Ionic Liquids as Catalysts for Carboxylation of Amines to Disubstituted Ureas”, ACS Sustainable Chem. Eng., 4, 451 (2016).

5. S.K. Clancy, A. Sodano, D.J. Cunningham, S.S. Huang, P.J. Zalicki, S. Shin†, B.K. Ahn†, “Marine bio-inspired underwater contact adhesion”, Biomacromolecules, 17, 1869-1874 (2016).

4. Y. Eo, H.-W. Rhee, S. Shin†, “Catalyst screening for the melt polymerization of isosorbide and diphenyl carbonate”, J. Ind. Eng. Chem., 37, 42-46 (2016).

3. S. Kim, J.K. Cho, S. Shin, B.J. Kim†, “Photo-curing behaviors of bio-based isosorbide dimethacrylate by irradiation of light-emitting diodes and the physical properties of its photo-cured materials”, J. Appl. Poly. Sci., 132, 42726 (2015).

2. E. Chang, Y.-C. Lee, J.K. Cho, S. Shin†, “Polarization efficiency enhancement of anisotropic film cast from yellow lyotropic chromonic LC by its coupled core structure”, Thin Solid Films, 589, 798 (2015).

1. E. Chang, J.K. Cho, S. Shin†, “Optimizing polarization efficiency of optically anisotropic films cast from lyotropic chromonic liquid crystals on surface-modified triacetyl cellulose films”, Prog. Org. Coat., 85, 38 (2015).