What Are Some of the Most Common Mistakes When Installing a Urethane Floor?

There are several common mistakes that many people make when installing a urethane floor. These mistakes can be easily avoided. In this article, we'll cover topics like preparation and order of installation. You'll also learn how to avoid bubbles and cross-ply construction in urethane flooring.

Preparation

Preparation is key to a successful urethane floor installation. It is crucial to remove any previous coatings, including the existing urethane. Also, it is important to properly clean the surface before applying the polyurethane coating. Failure to properly prepare the surface will result in the premature deterioration of the coating, which could result in the voiding of the warranty.

Order of Installation

A cementitious urethane coating can be installed over an existing concrete floor. The coating bonds extremely well to the sub floor and can expand and contract to accommodate uneven surfaces. It also creates a very durable, hard surface that can withstand many impacts. It also cures quickly and produces no odor or VOCs.

Proper preparation is essential before installing polymer coatings. If the substrate is not properly prepared, the flooring will not adhere properly. If it is too moist or has been exposed to excessive moisture, the final result will be unattractive.

Also read about, Five Guidelines for Well Maintaining Your Epoxy Floors

Avoiding Bubbles

If you're going to install a polyurethane floor yourself, you need to be aware of the most effective way to avoid bubbles and spots. First, make sure you're working in a well-ventilated room. Afterwards, apply a thin coat of polyurethane and work backwards, avoiding overworking the same spots. Allow the finish to dry for 4 to 8 hours before sanding.

Next, clean the surface thoroughly. This will help to remove any dust or debris that may be trapped under the floor. Also, make sure you're using a solvent that helps the epoxy adhere to the floor evenly, preventing bubbles and pinholes. You can also use a propane torch to pop bubbles, but be careful not to overheat the surface. Excessive heat could permanently damage the flooring.

Avoiding Cross Ply Construction

Unlike solid flooring, engineered wood is made from thin sheets of wood stacked in opposite directions. The layers are glued together under high pressure, resulting in a dimensionally stable product that will not warp or shrink under humidity or temperature changes. This type of flooring can be installed over either a concrete or wood sub floor, depending on the material.

Sealwell Industrial Floor Experts team has performed extensive research in Urethane Flooring, which enables us to assist you in understanding which variety of urethane flooring system could be the perfect fit for your space