Paper

Jinwoo Lee, Hyuk Jong Bong, Chanyang Kim, Daeyong Kim, Myoung-Gyu Lee, Investigation on a novel in-line incremental die forming process for sheet metals, Thin-Walled Structures, 193 (2023), 111281 [https://doi.org/10.1016/j.tws.2023.111281] [01 DEC 2023]

Jinwoo Lee, Hyuk Jong Bong, Jinjin Ha, Daeyong Kim*, Inter-void shearing effect on damage evolution under plane strain deformation in high-strength aluminum alloy sheet, Journal of Materials Research and Technology, 26 (2023), 7547-7565 [https://doi.org/10.1016/j.jmrt.2023.09.079] [01 SEP 2023]

이석규, 전춘호, 박세종, 이규철, 최성욱, 이원오, 김대용*, 무비드 성형 조건에서 스테인리스 강 Basket-bowl의 주름 방지를 위한 금형 설계 연구, 소성·가공(한국소성·가공학회지), 32권 4호, 2023년 8월,  199-207 [01 AUG 2023]

Jinwoo Lee, Hyuk Jong Bong, Daeyong Kim, Jinjin Ha, Modeling the multiaxial fracture behavior of Ti-6Al-4V alloy sheets at a high temperature using improved damage modeling, Journal of Materials Research and Technology, 25 (2023), 1844-1859 [https://doi.org/10.1016/j.jmrt.2023.06.059] [01 JUL 2023]

이진우, 봉혁종, 김대용, 초고강도 1470MPa급 판재 이방성 실험 결과에 관한 연구, 소성·가공(한국소성·가공학회지), 30권  2호, 2023년 4월, 87-91 [10.5228/KSTP.2023.32.2.87] [01 APR 2023]

Chanyang Kim, Dongjoon Myung, Daeyong Kim, Myoung-Gyu Lee, Inhomogeneous flow stresses in FSW jointed aluminum alloy sheets inversely identified by FE-VFM, 245 (2023), 108097 [https://doi.org/10.1016/j.ijmecsci.2022.108097] [01 MAY 2023]

Jong-Hwa Hong, Donghoon Yoo, Yong Nan Kwon, Daeyong Kim*, Evaluation of rate-dependent forming limit for AA7075 sheets under pneumatic stretching method at elevated temperatures, Journal of Materials Research and Technology, 22 (2023), 1839-1854 [https://doi.org/10.1016/j.jmrt.2022.11.151] [01 JAN 2023]

Soon-Dong Park, Daeyong Kim*, Sung Youp Kim, Effect of oxidation on mechanical properties of Ni/Cu interface: A density functional theory study, Materials Today Communications, 33 (2022), 104307 [https://doi.org/10.1016/j.mtcomm.2022.104307] [01 DEC 2022]

Sang Wook Han, Daeyong Kim, Daniyal Abolhasani, Chester J Van Tyne, Young Hoon Moon, Joining of metal–plastic composite layered tubes by hydroformed threaded coupling, Journal of Manufacturing Science and Engineering, 144 (2022), 111009 [https://doi.org/10.1115/1.4054870] [1 NOV 2022]

Jong-Hwa Hong, Hyunki Kim, Sangwook Han, Yong-Nam Kwon, Hyeonil Park, Daeyong Kim*, Bendability assessment of high strength aluminum alloy sheets via V-die air bending method, Journal of Materials Research and Technology, 20 (2022), 1481-1494 [https://doi.org/10.1016/j.jmrt.2022.07.123] [01 SEP 2022]

한상욱, 김대용, 문영훈, 액압 성형을 이용한 내부복합파형 고효율 이중관 제조 기술, 한국소성가공학회지, 31권 3호, 2022년 6월, 143-150 [http://doi.org/10.5228/KSTP.2022.31.3.143] 

Jong–Hwa Hong, Hyunki Kim, Wonjae Kim, Yong-Nam Kwon, Daeyong Kim*, Failure with Strain Localization of Aluminum Alloy 7075 Sheets at Elevated Temperature and its Application to Two-Step Hybrid Forming, Metals and Materials International, 28 (2022), 871-886 [https://doi.org/10.1007/s12540-020-00949-6] [01 APR 2022]

Jinwoo Lee, Hyuk Jong Bong, Hyeonil Park, Daeyong Kim, Micromechanics-based modeling of plastic and ductile fracture of aluminum alloy 2024-O, Engineering Fracture Mechanics, 261 (2022), 108213 [https://doi.org/10.1016/j.engfracmech.2021.108213] [15 FEB 2022]

Jaehoon Kim, Jaebong Jung, Taejoon Park, Daeyong Kim, Young Hoon Moon, Farhang Pourboghrat, Ji Hoon Kim, Characterisation of Compressive Behaviour of Low-Carbon and Third Generation Advanced High Strength Steel Sheets with Freely Movable Anti-buckling Bars, Metals, 12 (2022), 161 [https://doi.org/10.3390/met12010161] [17 JAN 2022]

Hyuk Jong Bong, Daeyong Kim, Yong-Nam Kwan, Jinwoo Lee, Predicting hot deformation behaviors under multiaxial loading using the Gurson-Tvergaard-Needleman damage model for Ti-6Al-4V alloy sheets, European Journal of Mechanics-A/Solids, 87 (2021), 104227 [https://doi.org/10.1016/j.euromechsol.2021.104227] [01 MAY 2021]

S. –D. Park, S. Y. Kim, D. Kim*, Ab initio investigations of the interfacial bond of Fe (001)/Al (001), Materials Today Communications, 26 (2021), 102107

Y. Sim, A. Yoon, H. S. Kang, J. Kwak, S. –Y. Kim, Y. Jo, D. Choe, W. Na, M.H. Lee, S. –D. Park, S. Song, D. Kim, J. –W. Yoo, S. Y. Kim, H. Cheong, J. S. Lee, C.-H. Lee, Z. Lee, S. –Y. Kwon, Design of 2D Layered Catalyst by Coherent Heteroepitaxial Conversion for Robust Hydrogen Generation, ADVANCED FUNCTIONAL MATERIALS, 31(2021), 2005449

J. –H. Hong, D. Yoo, Y. –N. Kwon, D. Kim*, Pneumatic Experimental Design for Strain Rate Sensitive Forming Limit Evaluation of 7075 Aluminum Alloy Sheets under Biaxial Stretching Modes at Elevated Temperature, Metals, 10 (2020), 1639

H. J. Bong, D. H. Yoo, D. Kim, Y. –N. Kwon, J. Lee, Correlative Study on Plastic Response and Formability of Ti-6Al-4V Sheets under Hot Forming Conditions, Journal of Manufacturing Processes, 58 (2020), 775-786

J. Lee, H. J. Bong, D. Kim, M. –G. Lee, Modeling differential permanent softening under strain-path changes in sheet metals using a modified distortional hardening model, International Journal of Plasticity, 133 (2020), 102786

J. Lee, H. J. Bong, D. Kim, Y. –S. Lee, Y. Choi, M. –G. Lee, Mechanical properties and formability of heat-treated 7000-series high-strength aluminum alloy: Experiments and finite element modeling, Metals and Materials International, 26 (2020), 682-694

H. Park, S. –J. Kim, J. Lee, J. H. Kim, D. Kim*, Delamination Behavior Analysis of Steel/Polymer/Steel High-Strength Laminated Sheets in a V-die Bending Test, International Journal of Mechanical Science, 173 (2020), 105430

J. Singh, M. –S. Kim, L. Kaushik, J. –H. Kang, D. Kim, E. Martin, S. –H. Choi, Twinning-detwinning behavior of E-form Mg alloy sheets during in-plane reverse loading, International Journal of Plasticity, 127 (2020), 102637

J. Lee, H. J. Bong, S. –J. Kim, M. –G. Lee, D. Kim*, An enhanced distortional-hardening-based constitutive model for hexagonal close-packed metals: Application to AZ31B magnesium alloy sheets at elevated temperatures, International Journal of Plasticity, 126 (2020), 102618

H. Park, J. Lee. Y. Lee, J. H. Kim, D. Kim*, Characteristic Evaluation of Electromagnetic Forming System and Its Application to Deformation Prediction in Bulge Forming, The Journal of Advanced Manufacturing Technology 107 (2020), 775-789

Y.C. Hur, D. Kim, B.M. Kim, C.Y. Kang, M.-G. Lee, J.H. Kim, Measurement of Weld Zone Properties of Laser-Welded Tailor-Welded Blanks and Its Application to Deep Drawing, International Journal of Automotive Technology 21(3) (2020) 615-622

H. Park, J. Lee, S.-J. Kim, Y. Lee, D. Kim*, Warm Forming Behavior of Magnesium Alloy Sheet in Manufacturing of Window Regulator Rail, International Journal of Automotive Technology, 20(S) (2019), 67-78

J. Lee, H.J. Bong, D. Kim, Y.-S. Lee, Y. Choi, M.-G. Lee, Application of Combined W-Temper and Cold Forming Technology to High-Strength Aluminum Alloy Automotive Parts, JOM, 71(2019), 4393-4404

J. Lee, H. J. Bong, D. Kim, Y-S. Lee, Y.Choi, M.-G. Lee, Mechanical Properties and Formability of Heat‑Treated 7000‑Series High‑Strength Aluminum Alloy: Experiments and Finite Element Modeling, Metal and Materials International, (2019), Published online

H. Park, S.-J. Kim, J. Lee, J.H. Kim, D. Kim*, Characterization of the Mechanical Properties of a High-Strength Laminated Vibration Damping Steel Sheet and Their Application to Formability Prediction, Metals and Materials International, 25(2019) 1326-1340

H. Park, J. Lee, Y. Lee, J.H. Kim, D. Kim*, Electromagnetic expansion joining between tubular and flat sheet component, Journal of Materials Processing Technology, 273 (2019), 116-246

J. Lee, H.J. Bong, Y.Lee, D. Kim*, M.-G. Lee, Pulsed electric current V-bending springback of AZ31B magnesium alloy sheets, Metallurgical and Materials Transactions A 50(6) (2019), 2720-2731

H.J. Bong, J. Lee, M.-G. Lee, D. Kim, Identification of mechanical responses of steel sheets under non-proportional loadings using dislocation-density based crystal plasticity model, International Journal of Mechanical Sciences, 155 (2019), 461-474.

J. Lee, H. Park, S.-J. Kim, Y.-N. Kwon, D. Kim*, Numerical investigation into plastic deformation and failure in aluminum alloy sheet rubber-diaphragm forming, International Journal of Mechanical Sciences, 142-143 (2018), 112-120.

S.-J. Kim, C. Lee, J. Koo, J. Lee, Y.-S. Lee, D. Kim*, Improving the room-temperature formability of a magnesium alloy sheet by texture control, Materials Science & Engineering A, 724 (2018), 156-163.

J. Lee, S.-J. Kim, H. Park, H.J. Bong, D. Kim*, Metal plasticity and ductile fracture modeling for cast aluminum alloy parts, Journal of Materials Processing Technology, 255(2018), 584-595.

J.W. Bae, J. Moon, M.J. Jang, D. Yim, D. Kim, S. Lee, H.S. Kim, Trade-off between tensile property and formability by partial recrystallization of CrMnFeCoNi high-entropy alloy, Materials Science & Engineering A, 703 (2017), 324-330.

J. Lee, S.-J. Kim, Y.-S. Lee, J.-Y. Lee, D. Kim*, M.-G. Lee, Distortional hardening concept for modeling anisotropic/asymmetric plastic behavior of AZ31B magnesium alloy sheets, International Journal of Plasticity, 94 (2017), 74-97.

M.-J. Kim, M.-G.Lee, K. Hariharan, S.-T. Hong , I.-S. Choi, D. Kim, K. H. Oh,

H.N. Han, Electric current assisted deformation behavior of Al-Mg-Si alloy under uniaxial tension, International Journal of Plasticity, 94(2017), 148-170

S.-J. Kim, S.-D. Kim, D. Yoo, J. Lee, Y. Rhyim, D. Kim*, Evaluation of the Athermal Effect of Electric Pulsing on the Recovery Behavior of Magnesium Alloy, Metallurgical and Materials Transactions A, 47A(2016), 6368-6373.

J. Lee, J. Ha, H. J. Bong, D. Kim*, M.-G. Lee, Evolutionary anisotropy and flow stress in advaced high strength steels under loading path changes, Materials Science & Engineering A, 672(2016), 65-77.

J.H. Kim, D. Kim, M.-G. Lee, J.K. Lee, Multiscale Analysis of Open-Cell Aluminum Foam for Impact Energy Absorption, Journal of Materials Engineering and Performance, 25(2016), 3977-3984.

H. Park, D. Kim*, J. Lee, S. J. Kim, Y. Lee, Y. H. Moon, Effect of an aluminum driver sheet on the electromagnetic forming of DP780 steel sheet, Journal of Materials Processing Technology, 235 (2016) 158-170.

J. Lee, M.G. Lee, J. H. Song, S. W. Choi, H. N. Han, D. Kim*, Experimental and numerical study on the deformation mechanism in AZ31B Mg alloy sheets under pulsed electric-assisted tensile and compressive tests, Metallurgical and Materials Transactions A, 47 (2016) 2783-2794.

S. J. Kim, Y. S. Lee, D. Kim*, Analysis of formability of Ca-added magnesium alloy sheets at low temperatures, Materials Characterization, 113 (2016), 152-159.

D. Kim, H. Kim, J. H. Kim, M. G. Lee, K. J. Kim, F. Barlat, Y. Lee, K. Chung, Modeling of forming limit for multilayer sheets based on strain-rate potentials, International Journal of Plasticity, 75 (2015), 63-99.

S. J. Kim, D. Kim*, K. Lee, H. H. Cho, H. N. Han, Residual-stress-induced grain growth of twinned grains and its effect on formability of magnesium alloy sheet at room temperature, Materials Characterization, 109 (2015), 88-94.

D. Leem, H. J. Bong, F. Barlat, M. G, Lee, J. H. Song, D. Kim, Enhancement in the modeling of temperature and strain rate-dependent plastic hardening behavior of a sheet metal, Steel Research International, 86 (2015), 902-914.

H. Kim, J. Lee, F. Barlat, D. Kim, M. G. Lee, Experiment and modeling to investigate the effect of stress state, strain and temperature on martensitic phase transformation in TRIP-assisted steel, Acta Materialia, 97 (2015), 435-444.

K. Hariharan, M. G. Lee, M. J. Kim, H. N. Han, D. Kim, S. Choi, Decoupling thermal and electrical effect in an electrically assisted uniaxial tensile test using finite element analysis, Metallurgical and Materials Transactions A, 46 (2015), 3043-3051.

J. S. Choi, J. W. Lee, J.H. Kim, F. Barlat, M. G. Lee, D. Kim, Measurement and modeling of simple shear deformation under load reversal: Application to advanced high strength steels, International Journal of Mechanical Sciences, 98 (2015), 144-156.

J. Lee, D. Kim, Y. S. Lee, H. J. Bong, F. Barlat, M. G. Lee, Stress update algorithm for enhanced homogeneous anisotropic hardening model, Computer Methods in Applied Mechanics and Engineering, 286 (2015), 63-86.

Y. Koh, D. Kim, D. Y. Seok, J. Bak, S. W. Kim, Y. S. Lee, K. Chung, Characterization of mechanical property of magnesium AZ31 alloy sheets for warm temperature forming, International Journal of Materials Science, 93 (2015), 204-217.

S. J. Kim, D. Kim, Y. S. Lee, C. S. Oh, K. Lee, H. N. Han, Influence of constraint condition on rolling behavior of magnesium alloy at low temperature, Metals and Materials International, 4 (2015), 719-725.

D. Y. Seok, D. Kim, S. W. Kim, J. Bak, Y. S. Lee, K. Chung, Fracture criterion for AZ31 Mg alloy plate at elevated temperature, Metals and Materials International, 21 (2015), 54-71.

D. Kim, H. I. Park, J. Lee, J. H. Kim, M. G. Lee, Y. Lee, Experimental study on forming behavior of high-strength steel sheets under electromagnetic pressure, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229 (2015), 670-681.

H. Kim, J. Lee, F. Barlat, D. Kim, M. G. Lee, Effect of stress state and temperature on the kinetics of martensitic phase transformation in TRIP-assisted steel, Key Engineering Materials, 651-653 (2015), 27-31.

J. H. Kim, D. Kim, M. G. Lee, Experimental and numerical analysis of a rectangular helical coil actuator for electromagnetic bulging, The International Journal of Advanced Manufacturing Technology, 78 (2015), 825-839.

S. W. Kim, D. Kim, Analytical investigation on optimum member angle of lattice truss, Applied Mechanics and Materials, 548-549 (2014), 537-541.

D. Kim, J. H. Kim, M. G. Lee, Numerical analysis for process parameter effect in electromagnetic impact welding of aluminum alloy sheet, Applied Mechanics and Materials, 548-549 (2014), pp. 297-300.

D. Kim, H. I. Park, J. H. Kim, Y. Lee, M. G. Lee, Numerical analysis on electromagnetic forming of automotive sheets with flat spiral coil, SAE Technical Paper 2014-01-2013, (2014).

D. Kim, J. H. Kim, M. G. Lee, Evaluation of electromagnetic forming behavior of automotive aluminum alloy sheet, SAE Technical Paper 2013-01-0131, (2013).

J. H. Kim, D. Kim, Y. S. Lee, M. G. Lee, K. Chung, H. Y. Kim, R. H. Wagoner, A temperature-dependent elasto-plastic constitutive model for magnesium alloy AZ31 sheets, International Journal of Plasticity, 50 (2013), 66-93.

M. G. Lee, J. H. Kim, D. Kim, O. S. Seo, N. T. Nguyen, H. Y. Kim, Anisotropic hardening of sheet metals at elevated temperature: Tension-compressions test development and validation, Experimental Mechanics, 53 (2013), 1039-1055.

J. H. Kim, M. G. Lee, D. Kim, F. Barlat, Numerical procedures for predicting localization in sheet metals using crystal plasticity, Computation Materials Science, 72 (2013), 107-115.

J. H. Kim, D. Kim, H. N. Han, F. Barlat, M. G. Lee, Strain rate dependent tensile behavior of advanced high strength steels: Experiment and constitutive modeling, Materials Science and Engineering A, 559 (2013), 222-231.

J. H. Kim, M. G. Lee, H. D. Shin, D. Kim, A numerical investigation of the hole expansion test, Advanced Science Letters, 14 (2012), 218-221.

D. Kim, J. H. Kim, M. G. Lee, Y. I. Kim, Mechanical property degradation of laser welded boron steel sheet in hot press forming, Advanced Science Letters , 13 (2012), 447-450.

J. H. Kim, M. G. Lee, F. Barlat, D. Kim, Prediction of nonlinear kinematic hardening parameters for DP steels by crystal plasticity-based micromechanical analysis, Advanced Science Letters, 13 (2012), 224-227.

D. Kim, J. H. Kim, Y. S. Lee, Y. Kim, Experimental investigation on biaxial formability of tailored high strength steel at elevated temperature, Steel Research International (Special Issue), (2012), 879-882.

J. H. Kim, M. G. Lee, D. Kim, Y. S. Lee, F. Barlat, Comparison of forming limits predicted using pheonmelogical and crystal plasticity models, Steel Research International (Special Issue), (2012), 1123-1126.

J. Kim, K. H. Chung, W. Lee, D. Kim*, Numerical evaluation of hydro-formed DP-steel tubes on crash-performance with welding heat effect, Materials Transactions, 53 (2012), 812-819.

J. H. Kim, D. Kim, F. Barlat, M. G. Lee, Crystal plasticity approach for predicting the Bauschinger effect in dual-phase steels, Materials Science and Engineering A, 539 (2012), 259-270.

J. H. Kim, M. G. Lee, D. Kim, R. H. Wagoner, Micromechanics-based strain hardening model in considering of dislocation-precipitate interactions, Metals and Materials International, 17 (2011), 291-300.

J. Kim, W. Lee, K. H. Chung, D. Kim, C. Kim, K. Okamoto, R. H. Wagoner, K. Chung, Springback evaluation of friction stir welded TWB automotive sheets, Metals and Materials International, 17 (2011), 83-98.

D. Kim, J. H. Kim, M. G. Lee, Y. S. Lee, S. H. Kang, Experimental investigation into effect of annealing treatment on springback of magnesium alloy sheets, Materials Research Innovations, 15 (2011), s183-s186.

S. H. Kang, D. Kim, Y. S. Lee, Application of ductile fracture criterion to manufacture of aluminum liner by drawing and ironing processes, Materials Research Innovations, 15 (2011), s241-s244.

Y. S. Lee, T. W. Chung, D. Kim, Y. H. Moon, Effects of surface strength and temperature on warm forming of MG-AL-SUS clad sheet, Key Engineering Materials, 443 (2010), 183-188.

D. Kim, B. K. Hwang, Y. S. Lee, S. W. Kim, Y. H. Moon, Influence of annealing treatment on formability and springback for magnesium alloy sheets, Key Engineering Materials, 443 (2010), 189-194.

J. H. Kim, J. H. Sung, D. K. Matlock, D. Kim, R. H. Wagoner, Finite element and analytic study of plane strain draw-bend failure of advanced high strength steels, International Journal of Material Forming, 3 (2010), 187-190.

J. H. Kim, M. G. Lee, D. Kim, D. K. Matlock, R. H. Wagoner, Hole-expansion formability of dual-phase steels using representative volume element approach with boundary-smoothing technique, Materials Science and Engineering A, 527 (2010), 7353-7363.

J. H. Kim, J. H. Sung, D. K. Matlock, D. Kim, R. H. Wagoner, Simple analytical model of shear failure, Steel Research International (Special Issue), 81 (2010), 1360-1363.

D. Kim, W. Lee, J. Kim, C. Kim, K. Chung, Formability evaluation of friction stir welded 6111-T4 sheet with respect to joining material direction, International Journal of Mechanical Sciences, 52 (2010), 612-625.

D. Kim, W. Lee, J. Kim, K. H. Chung, C. Kim, K. Okamoto, R. H. Wagoner, K. Chung, Macro-performance evaluation of friction stir welded automotive tailor-welded blank sheets: Part II – Formability, International Journal of Solids and Structures, 47 (2010), 1063-1081.

K. Chung, W. Lee, D. Kim, J. Kim, K. H. Chung, C. Kim, K. Okamoto, R. H. Wagoner, Macro-performance evaluation of friction stir welded automotive tailor-welded blank sheets: Part I – Material properties, International Journal of Solids and Structures, 47 (2010), 1048-1062.

J. Kim, K. H. Chung, W. Lee, J. Kong, H. Ryu, D. Kim, C. Kim, M. L. Wenner, K. Chung, Optimization of boost condition and axial feeding on tube bending and hydro-forming process considering formability and spring-back, Metals and Materials International, 15 (2009), 863-876.

W. Lee, K. H. Chung, D. Kim, C. Kim, K. Okamoto, R. H. Wagoner, K. Chung, Experimental and numerical study on formability of friction stir welded TWB sheets based on hemispherical dome stretch tests, International Journal of Plasticity, 25 (2009), 1626-1654.

J. Kim, H. Ryou, D. Kim, D. Kim, K. Chung, S. H. Hong, Constitutive law of AZ31B Mg alloy sheets and finite element simulation of three point bending, International Journal of Mechanical Science, 50 (2008), 1510-1518.

M. G. Lee, D. Kim, C. Kim, R. H. Wagoner, K. Chung, Semi-analytic hybrid method to predict springback in 2D draw bend test, Journal of Applied Mechanics – Transaction of the ASME, 74 (2007), 1264-1271.

D. Kim, F. Barlat, S. Bouvier, M. Rabahallah, T. Balan, K. Chung, Non-quadratic anisotropic potentials based on linear transformation of plastic strain rate, International Journal of Plasticity, 23 (2007), 1380-1399.

M. G. Lee, D. Kim, C. Kim, M. L. Wenner, R. H. Wagoner, K. Chung, A practical two-surface plasticity model and its application to spring-back prediction, International Journal of Plasticity, 23 (2007), 1189-1212.

W. Lee, D. Kim, J. Kim, K. Chung, S. H. Hong, Analysis of forming process of automotive aluminum alloys considering formability and springback, Key Engineering Materials, 345-346 (2007), 857-860.

J. Kim, W. Lee, D. Kim, J. Kong, C. Kim, M. L. Wenner, K. Chung, Effect of hardening laws and yield function types on spring-back simulations of dual-phase steel automotive sheets, Metals and Materials International, 12 (2006), 293-305.

M. G. Lee, D. Kim, C. Kim, M. L. Wenner, K. Chung, Spring-back evaluation of automotive sheets based on isotropic-kinematic hardening laws and non-quadratic anisotropic yield functions, Part III: Applications, International Journal of Plasticity, 21 (2005), 915-953.

M. G. Lee, D. Kim, C. Kim, M. L. Wenner, R. H. Wagoner, K. Chung, Spring-back evaluation of automotive sheets based on isotropic-kinematic hardening laws and non-quadratic anisotropic yield functions, Part II: Characterization of Material Properties, International Journal of Plasticity, 21 (2005), 883-914.

K. Chung, M. G. Lee, D. Kim, C. Kim, M. L. Wenner, F. Barlat, Spring-back evaluation of automotive sheets based on isotropic-kinematic hardening laws and non-quadratic anisotropic yield functions, Part I: Theory and formulation, International Journal of Plasticity, 21 (2005), 861-882.

M. G. Lee, D. Kim, K. Chung, J. R. Youn, T. J. Kang, Combined isotropic-kinematic law for orthotropic fiber-reinforced composites, Polymer and Polymer Composites, 12 (2004), 225-234.

D. Kim, M. G. Lee, C. Kim, M. L. Wenner, R. H. Wagoner, F. Barlat, K. Chung, J. R. Youn, T. J. Kang, Measurements of anisotropic yielding, Bauschinger and transient behavior of automotive dual-phase steel sheets, Metals and Materials International, 9 (2003), 561-570.

K. J. Kim, D. Kim, S. H. Choi, K. Chung, K. S. Shin, F. Barlat, K. H. Oh, J. R. Youn, Formability of AA5182/polypropylene/AA5182 Sandwich Sheets, Journal of Materials Processing Technology, 139 (2003), 1-7. 

유동훈, 김지훈, 박상언, 장홍규, 김대용*, 하이브리드 센터필러 제조 시 열처리 이력이 7075 알루미늄 합금 판재의 인장강도에 미치는 영향, 한국소성가공학회지, 제 30권 제2호, 2021년, pp. 61-68

유동훈, 홍종화, 권용남, 김지훈, 김대용*, 7075 알루미늄 합금 판재의 변형률 속도에 따른 고온 인장 파손 거동, 대한기계학회논문집, 제45권 제2호, 2021년 2월, pp. 113-122

박현일, 이진우, 이영선, 김지훈, 김대용*, 수치적 변수들이 배면판을 이용한 고강도 강판의 전자기 성형 해석에 미치는 영향도 분석, 한국소성가공학회지, 제28권 제3호, 2019년 6월, pp. 159-166.

박현일, 이광석, 이진우, 이영선, 김대용*, 전자기 용접의 충돌 속도에 대한 코일 형상의 영향, 한국소성가공학회지, 제28권 제3호, 2019년 6월, pp. 135-1441

박현일, 김대용*, 전기펄스 이용 충격 성형접합 기술 동향, 재료마당, 제31권 제6호, 2018년 11월, pp. 32-47.

김대용, 이영선, 소성변형 기반 다종소재 접합기술, 오토저널, 2017년 6월, pp. 36-40.

조민기, 안은솔, 박인욱, 송익성, 김화영, 김대용, 문영훈, 김지훈, AA1070 알루미늄 합금의 사각형상 충격압출 성형에 미치는 공정 조건의 영향, 한국소성가공학회지, 제24권 제5호, 2015년 10월, pp. 323-331.

남기우, 황석환, 김대용, 이문용, 이상문, TWB 보론강의 기계적 특성 및 성형성, 대한기계학회논문집 A권(ISSN: 1226-4873), 제36권 제10호, 2012년 10월, pp. 1221-1226.

이영선, 이광석, 김대용*, 온간 딮 드로잉에서 이종금속판재 (STS430-Al3004-AZ31)의 파단 및 두께 예측을 위한 연구, 한국소성가공학회지, 제21권 제1호, 2012년 2월, pp. 49-57.

김낙현, 김지훈, 이종국, 김대용*, 알루미늄 폼이 충전된 충돌부재의 충격흡수 성능, 한국소성가공학회지, 제20권 제8호, 2011년 12월, pp. 555-561.

김영일, 김지훈, 김용, 이문용, 문영훈, 김대용*, 보론강 용접 맞춤 판재의 고온 에릭슨 커핑 평가, 한국소성가공학회지, 제20권 제8호, 2011년 12월, pp. 568-574.

김영일, 김지훈, 이종국, 김대용*, 마이크로 X-ray CT를 활용한 알루미늄 개방형 폼의 형상 및 압축 거동 분석, 한국소성가공학회지, 제20권 제7호, 2011년 11월, pp. 518-523.

김대용, 김지훈, 유동훈, 정관수, 김용, 이문용, 레이저 용접된 보론강판의 고온 인장 특성 평가, 한국소성가공학회지, 제20권 제5호, 2011년 8월, pp. 362-368.

김대용, 김지훈, 이영선, F. Barlat, 정관수, 평면 응력 조건에서 정의된 비이차 비등방 변형률 속도 포텐셜, 한국소성가공학회지, 제20권 제5호, 2011년 8월, pp. 369-376.

김대용, 추인호, 이영선, 김상우, 다구치 실험계획법을 이용한 임펠러 블레이드 다이캐스팅의 내부 결함 최소화, 한국소성가공학회지, 제19권 제3호, 2010년 6월, pp. 173-178.

김준형, 이원오, 정경환, 박태준, 김돈건, Chongmin Kim, 김대용*, 영구연화거동을 고려한 마찰교반용접된 DP590강판의 탄성복원 예측, 한국소성가공학회지, 제18권 제4호, 2009년 7월, pp. 329-335.

김대용, 이원오, 김준형, Chongmin Kim, 정관수, 모재의 방향성에 따른 마찰교반용접 판재의 성형성에 관한 실험적 연구, 한국소성가공학회지, 제18권 제1호, 2009년 2월, pp. 73-79.

오승택, 이두환, 한도석, 장용민, 김대용*, 다구찌 최적화 방법을 이용한 단판형 로어암 개발, 한국소성가공학회지, 제17권 제8호, 2008년 12월, pp. 613-618.

이명규, 김대용, 정관수, Chongmin Kim, Michael L.Wenner, 혼합 등방-이동 경화규칙에 기초한 자동차용 알루미늄합금 및 Dual-Phase 강 판재의 스프링백 예측, 한국소성가공학회지, 제13권 제1호, 2004년 2월, pp. 15-20.

김대용, 김기주, 정관수, 신광선, 유동진, AA5182판재와 A5182/PP/AA5182 샌드위치 판재의 성형성 평가, 한국복합재료학회지, 제13권 제2호, 2000년, pp. 81-90.