calibrate

we can't accurately say what max raw data that everybody gets on their switches.

For Original O3C Red Switches: Your hall-effect switches has low max raw data such as 250~300, you can calibrate less about 50~80 raw data to your switches max raw data and depends what you want between this range.
For Gateron KS-20/Lekker/Omnipoint: Your hall-effect switches max raw data are above 1000+, You can just calibrate less about 150~250 raw data to your switches max raw data and depends what you want between this range.

Calibrate Tutorial Video (RAW DATA ARE ONLY FOR GATERON SWITCHES USERS):

IMG_2814.mov

+You may ask, Why not just calibrate all max raw data?

It just because if your release parameter are lower than 3x0.05 ~ which is 0.15mm, There's will be a key release problem and We want you to avoid it.

But if you want normaly use and need max raw data, then just please set at least 4x0.05mm ~ 0.20mm
*DEAD ZONE IS SOMETHING THAT SIMILAR TO ACTUATION POINT

Page updated

Google Sites

Report abuse