Sash Window Draught Proofing Bishopton
Draught Proofing Your Sash Window
A sash window that is draught proofed can boost the efficiency of your windows, and also help to reduce your energy bills. It is possible to do this yourself, but in the event that you're not comfortable with the task, it may be better to hire a professional. The draught proofing system is designed to not be intrusive, and improves your energy efficiency without affecting the original design of the window. It also helps reduce the amount of airborne pollution, and make your areas warmer.
A draught proofing system is a set of special items that are fitted on the sash window of your home to increase the efficiency of your energy usage. There are two kinds of draught-proofing systems that are available. Both require high quality materials and craftsmanship. A professional installer knows which materials to use, and ensure that the draught proofing system is the best choice to your window.
To determine if you need to have your windows draught-proofed, you should first identify the location where the draughts come from. Draughts could originate from gaps between window joints ceiling-to-wall joint or doors. They may be caused by damaged lock or joints which have not been properly refurbished. An experienced installer will be able spot and repair these issues before they create problems.
A draught-proofing sash window system consists of an excluder for draughts, a Draught seal as well as a weather strip. It is crucial to select the highest quality of system because seals that are not fitted properly can result in the development of wet rot, as well as airborne pollutants. The draught-proofing system will improve energy efficiency and ventilation and help cut down on the amount of energy you use. It is also recommended to have your windows draught proofed if you own a listed building. This is particularly important for those who live in the Bristol area, where there are many listed buildings. You should also consult your local planning officer for advice regarding draught-proofing.
The draught seal is a brush pile of nylon or rubber that is affixed to the frame of the window at the meeting point between the sashes top and bottom. The brush pile can be fixated using adhesive strips. They are used to seal small gaps between 1mm and 5mm. Larger gaps require the use of expanding foam. They are typically sold in containers that come with a reusable applicator. Additionally, you can purchase foam strips that are self-adhesive. They aren't easy to use. The adhesive may not be successful on sash windows, because they can become stuck to the frame after the windows are shut.
A draught seal should never be covered with paint. This could lead to the seal becoming brittle over time. The seal needs to be cleaned with soapy water. Make sure that the windows are square. If they are not they will vibrate when the wind blows. The seal should be positioned on both sides of the window in order to stop gaps. It is also crucial to check that the seal is the right size for your windows.