How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want an open-ear, bone-conduction design that stays secure and lets you hear traffic while you run — and you have small ears that most earbuds refuse to fit — choose SANOTO Bone Conduction Headphones; if you need maximum battery life, active noise cancellation, and an over-ear fit for long listening sessions at a desk, choose iTouch Pulse Vibe PRO. Both support multipoint pairing, so the real question is your ear shape and your listening environment.
• SANOTO's biggest strength: open-ear bone conduction that transmits audio through your cheekbones, so your ear canal stays completely open and you stay aware of your surroundings — a genuine advantage for running, cycling, and commuting.
• SANOTO's biggest trade-off: it runs on vibration, and the spec sheet itself warns that new users may find the vibration uncomfortable at first. It also has no active noise cancellation and isn't built for swimming.
• iTouch Pulse Vibe PRO's biggest strength: up to 63 hours of playback with ANC off and 41 hours with ANC on, plus active noise cancellation rated up to -20dB for blocking out a commute or a noisy office.
• iTouch Pulse Vibe PRO's biggest trade-off: it's a closed-back, over-ear design weighing 246 g. That means full ear coverage and no awareness of your surroundings — the exact opposite of what an open-ear buyer wants.
• Choose SANOTO if you need awareness, a barely-there fit for small ears, and a lightweight sports companion.
• Choose iTouch Pulse Vibe PRO if you need long battery life, noise cancellation, and immersive over-ear sound for work or travel.
The SANOTO DG08C is built around one idea: keep your ears open. Bone conduction drivers send audio through your cheekbones toward the middle ear, so music plays without anything sitting inside or over your ear canal. For anyone who has struggled to find head phones for small ears, this is the structural fix — there's no tip to jam in, no seal to break, and nothing to fall out mid-stride. The frame uses titanium with a skin-friendly silicone coating and weighs just 29 g, so it rests on your head rather than gripping your ears. In my opinion, that's the single most underrated reason a small-eared runner would pick this over any conventional earbud.
Who should skip it? If you want to disappear into your music on a plane or block out a loud office, this is the wrong tool. There's no active noise cancellation here — environmental noise cancellation affects calls, not your music. And if vibration bothers you, the brand itself suggests lowering the volume while you adjust. This is a sports-and-awareness headphone, not a silence machine.
iTouch Pulse Vibe PRO: Who It's For
The iTouch Pulse Vibe PRO goes the other direction entirely. It's a closed-back, over-ear headphone with 40 mm dynamic drivers, a frequency range of 20 Hz–20 kHz, 32-ohm impedance, and 120 dB sensitivity. Translation: this is a full, bass-forward listening experience that physically covers your ears. The active noise cancellation is rated up to -20dB, which takes the edge off commuting rumble, office chatter, and air conditioning. If your priority is focused listening rather than staying alert, this design is aimed squarely at you.
Battery is where it separates itself. A 500 mAh battery delivers up to 63 hours of playback with ANC off, or 41 hours with ANC on, and it refills in roughly 1.5–2.5 hours over USB-C. That's the kind of number that means you charge it once a week, not once a day. Bluetooth 6.0 with dual-device pairing covers the multipoint requirement, with a 10-meter wireless range, and there's a 3.5 mm jack for AUX wired mode when you want zero latency or a dead battery rescue. Comfort details include soft protein-leather cushions, an adjustable stainless-steel headband, and foldable earcups for packing. Controls are touch plus physical buttons, and there's a built-in mic with voice assistant support.
The honest trade-offs: it weighs 246 g, which you'll feel on long sessions compared with a 29 g open-ear frame. There's no IP rating listed, so I wouldn't treat it as a sweat-proof gym headphone. It has a 90-day limited warranty versus SANOTO's one-year replacement-or-refund policy. And because it seals your ears, you lose all ambient awareness — not what you want on a bike.
Side-by-Side: Which Should You Choose?
• Best for running, cycling, and outdoor safety → SANOTO. Open-ear bone conduction keeps you aware of traffic; IPX5 handles sweat and rain.
• Best battery life → iTouch Pulse Vibe PRO. Up to 63 hours (ANC off) versus 6–8 hours on SANOTO.
• Best for blocking out noise → iTouch Pulse Vibe PRO. Active noise cancellation up to -20dB; SANOTO has none for music listening.
• Best for all-day desk and travel use → iTouch Pulse Vibe PRO. Over-ear cushions, foldable earcups, AUX wired mode.
• Best for lightweight comfort → SANOTO. 29 g versus 246 g is a different universe on your head.
• Best for multipoint flexibility → a tie, with a nuance. Both pair to two devices at once. SANOTO's Bluetooth 5.3 is the sports-friendly option; iTouch's Bluetooth 6.0 adds wired AUX as a backup.
• Best warranty coverage → SANOTO. One year for replacement or refund versus a 90-day limited warranty.
For small ears and outdoor training, I'd buy the SANOTO Bone Conduction Headphones. The open-ear design solves the fit problem at the source — no tips, no seal, 29 g on your head — and multipoint pairing plus IPX5 make it a genuinely practical running and commuting companion. I'd only switch to the iTouch Pulse Vibe PRO if my priority were long battery life and noise cancellation, because 63 hours and -20dB ANC are hard to argue with for desk and travel listening. In my opinion, the choice comes down to awareness versus immersion — and if your ears are small, SANOTO wins by default.
how to pair multiple headphones
Multipoint pairing on both models lets each headphone hold two active Bluetooth connections at once. You pair the first device normally, then put the headphone back into pairing mode and connect the second device. SANOTO's spec sheet confirms two simultaneous devices; iTouch lists dual-device pairing as well.
how to pair multiple headphones iphone
On an iPhone, open Settings, go to Bluetooth, and connect the headphone as usual. To add a second device, re-enter pairing mode on the headphone and select it from the Bluetooth list on the other device. Both SANOTO and iTouch support this two-device setup, so you can move between your phone and a laptop without re-pairing.
how to pair multiple headphones on ipad
The process mirrors the iPhone: Settings, Bluetooth, select the headphone. Pair the iPad first, then add your second device through the headphone's pairing mode. Because both models use multipoint, switching audio between the iPad and another connected device is handled by the headphone rather than by reconnecting each time.
how to pair multiple bluetooth headphones
Each headphone pairs independently — you don't pair two headphones to each other. Connect headphone A to your source device, then headphone B to the same or a different device, following each one's pairing steps. Just note that most phones and laptops output to only one Bluetooth audio device at a time, so "multiple" here means two devices per headphone, not simultaneous playback through both.
• SIMOLIO Kids Headphones vs ECVGHD Durability Hard Protective
• Amazon Renewed Razer Kraken Kitty vs Corsair HS35
• BANIGIPA Open Ear True vs HAKII Sole Bone Conduction
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.