14. Jun Sung KIM, Sang Wook LEE*, Bum Ki Huh,
Computational Analysis of Sloshing Behavior in a Water Tank for Compact Fire – fighting Vehicles: Analysis of Wall Pressure with Various Filling Ratios, 한국소음진동공학회 추계학술대회, Nov. 2025
13. Su Won JEON, Sang Wook LEE*, Hyun U Pak,
Aerodynamic Performance Analysis of Coaxial Co-Rotating Rotors in Hover: Comparison of Experiments and Numerical Simulations, 한국소음진동공학회 추계학술대회, Nov. 2025
12. Hyeon U PAK, Wanchin KIM, Sang Wook LEE*,
Conjugate Heat Transfer Simulation of Automotive Headlamps, J. Korean Soc. Mech. Technol., 27(5): 2025
11. Su Won Jeon, Sang Wook Lee*,
Effect of Axial Offset, Index Angle, and RPM Differential on the Aerodynamics of Co-Axial Co-Rotating Propellers, Aerospace 2025, 12, 940.
10. Wan Hee HAN, Sang Wook LEE, Jiseok LIM, No-Cheol PARK*, Wan-Chin KIM*,
Design and feasibility study on a compact wide-field LiDAR optical system using polygonal mirrors, Optics and Lasers in Engineering(195):109273 (2025)
9. Jun Sung KIM, Bum Ki Huh, Sang Wook LEE*,
Computational Analysis of Sloshing Behavior in a Water Tank for Compact Fire-fighting Vehicles, 한국청정기술학회 2025년 추계학술대회, Sep. 2025.
8. Su Won JEON, Kyungmo Yu, Hyun U Pak, Sang Wook LEE*,
Aerodynamic and Performance of Tire Sidewall Cooling Fins in a Realistic Vehicle Model, 한국청정기술학회 2025년 추계학술대회, Sep. 2025.
7. Su Won JEON, Sang Wook LEE*, Wan-Chin KIM, Soo-Whang BAEK,
Aerodynamic Performance of Coaxial Co-Rotating Propellers Operating at Different Rotational Speeds, 한국기계기술학회 2025년 하계학술대회, Aug. 2025.
6. Kyoungmi YU, Sang Wook LEE*,
Numerical Study on the Influence of Cooling-Fin Geometry on the Aero-Thermal Behavior of a Rotating Tire, Energies(18):3133 (2025)
5. Hyun U Pak, Su Won Jeon, and Sang Wook LEE*
Experimental and Numerical Study on the Thrust Characteristics of Coaxial Co-Rotating Propellers, 대한기계학회 호남지회 2025년 춘계학술대회, May 2025
4. Ho-bum LEE, Wan-chin KIM*, Sang Wook LEE,
Study on Data Augmentation Techniques for AI Training to Predict Aerodynamic Coefficients of Airfoils, 한국소음진동공학회 춘계학술대회, May 2025
3. Su Won Jeon, Hyun U Pak, and Sang Wook LEE*,
Aerodynamic Performance Analysis of Coaxial Co-Rotating Propellers with Respect to Axial Spacing and Installation Angle, 한국소음진동공학회 춘계학술대회, May 2025
2. Jae Hyung Yoon, Su Woong Hyun, Hee Jun Jeong, Sang Wook LEE, Dong Ho Shin* ,
Thermal fluidic characteristics of microencapsulated PCM slurry (MPCS) in battery immersion cooling, J Mech Sci Technol(39):1477–1486 (2025).
1. Seong-Jin CHO, Sang Wook LEE*,
Aerodynamic Performance Analysis on Various Wheel Configurations of Commercial Vehicle, Microsys Technol(31):1147–1159 (2025)
10. Gyeongmi YU, Suwon JEON, Wanchin KIM and Sang Wook LEE*,
Prediction of Propeller Aerodynamic Performance based on Blade Element Theory, J. Korean Soc. Mech. Technol., 26(6): 1317~1323, 2024
9. Hobum LEE, Wan-Chin Kim*, Sang Wook LEE,
Optimization and Performance Evaluation of an Airtificial Neural Network Model for Predicting Aerodynamic Coefficients in Rotor Blade Airfoil Shape Design, 한국소음진동공학회 추계학술대회, Oct. 2024
8. Gyeongmi YU, Suwon JEON and Sang Wook LEE*,
Prediction of propeller air-loading using blade element theory, 한국소음진동공학회 추계학술대회, Oct. 2024
7. Suwon JEON, Sang Wook LEE*,
Development of smart farm ventilation system using computational fluid dynamics, 한국기계기술학회 하계학술대회, Aug. 2024
6. Gyeongmi YU, Sang Wook LEE*,
Aerodynamic performance analysis of contra-rotating ducted propeller, 한국기계기술학회 하계학술대회, Aug. 2024
5. Hyunwoo Park, Sang Wook LEE*,
Aerodynamic performance analysis of corotating propeller, 한국기계기술학회 하계학술대회, Aug. 2024
4. Bumgi Hu, Sang Wook LEE*,
Development of Mechanical Parts of a Construction 3D Printer, 한국기계기술학회 하계학술대회, Aug. 2024
3. Jinwoo Jung , Young-Jae Kim, Hyun-Sang Shin, Ki-Joong Kim, Bu-Hyun Shin, Sang-Wook Lee, Byung-Wook Kim, and Wan-Chin Kim,
Optical Module for Simultaneous Crop Cultivation and Solar Energy Generation: Design, Analysis, and Experimental Validation, Appl. Sci. 2024, 14, 4758
2. Gyeongmi YU, Sang Wook LEE*,
Analysis of the Effects of Tire Sidewall Geometry on Aerodynamic and Thermal Performance, 한국자동차공학회 춘계학술대회, Jun. 2024
1. Wan-Chin Kim, Seonghoon LEE, Hobum LEE, and Sang Wook LEE,
Design of coaxial and dome type combined lighting device to implement integrated machine vision solutions, 한국소음진동공학회 춘계학술대회, May 2024
4. Kyoung Mi YU, Seong Jin CHO, Sang Wook LEE*
Analysis of Aerodynamic and Thermal Performance Based on Tire Sidewall Cooling Fin Shapes, 한국자동차공학회 추계학술대회, Nov. 2023
3. Seong Jin CHO, Sang Wook LEE*
Aerodynamic Performance on dual and tandem wheel of commercial vehicles, ASME ISPS2023 Conference, Aug. 2023
2. Gyu Hyeon JO, Yeon Jun Kang, Jin Ho Heo, Young Chae Yun, Jun Min Mun, Kyung Mi YU, Seong Jin CHO, Sang Wook LEE*,
Effect of Truss Structure on Self-made car Frame : Structural Analysis and Design Improvement Study, 한국생산제조학회 춘계학술대회, July 2023
1. Gyeongmi YU, Seong-Jin CHO, Wanchin KIM*, Sang Wook LEE*,
Improvement of heat dissipation performance of coaxial lighting device, J. Comput. Fluids Eng. 28(4):37-44
8. Sang Wook LEE*, Jong Kwon KIM,
Numerical Study on HVAC Performance of Greenhouse, Journal of the KSMT 24(6):1315-1320
7. 박영진, 조성진, 이상욱*,
독립사륜구동 시스템을 이용한 건축용 3D프린터용 로더개발, 한국자동차공학회, Nov. 2022
6. 조성진, 유경미, 이상욱*,
상용차량 복륜 타이어의 이격거리에 따른 공력성능, 한국자동차공학회, Nov. 2022
5. 조성진, 유경미, 이상욱*,
다중 토출구를 가진 초박형 공기살균기 내부유동해석, 소음진동공학회, Nov. 2022
4. 허승예, 김완진*, 김유림, 이상욱,
고용융점 플라스틱 소재 출력 가능한 FDM 3D 프린터 개발, 소음진동공학회, Nov. 2022
3. Seong-Jin CHO, Gyeongmi YU, Taesoo YU, Junbeom PARK, Seonghoon MA, and Sang Wook LEE*,
Air flow simulation of a wall mount type air sterilizer using computational fluid dynamics technique, Journal of the KSMT 24(5):905-911
2. Yu-Rim Kim , Seung-Ye Heo, Sang-Wook Lee, and Wan-Chin Kim
A study on the application of TIR lens for realization of a compact spot-type UV curing optical system, Journal of the KIECS17(2):255-264
1. Sang Wook LEE*, Seong-Jin CHO, and Wanchin KIM,
Development of thermo-fluid simulation technique for extruder and chamber of FDM-type 3D printer for printing high-melting-point materials, Microsys Technol.28(10):2225-2234
5. Seong-Jin CHO, Wanchin KIM, Sang Wook LEE*,
NUMERICAL STUDY ON THE IMPROVEMENT OF TEMPERATURE UNIFORMITY OF A FDM TYPE 3D PRINTING CHAMBER , J. Comput. Fluids Eng. 26(4): 42-47.
4. Seong-Jin CHO, Sang Wook LEE*,
Analysis of Aerodynamic Performance of 5-inch Propeller using an Unsteady Moving Mesh Technique , Journal of the KSMT 23(6):1085-1090.
3. 김유림, 허승예, 이상욱, 김완진,
300°C 이상 고용융점 필라멘트 소재의 3D 프린팅에 요구되는 130°C 이상 조형베드 항온유지 저가 구현방안 개발, 한국생산제조학회, Jul. 2021
2. 허승예, 김완진, 이상욱,
고용융점을 갖는 필라멘트 소재의 용융압출적층조형을 위한 3D 프린터 노즐 헤드 방열특성 개선에 관한 연구, 소음진동공학회, May 2021
1. Sang Wook LEE* and Wan-Chin Kim,
A Study on Thermal Management of FDM Type 3D Printer for Deposition of Bio-Compatible Materials, ASME ISPS2021-65242
7. Sang Wook LEE*, Jong Kwon KIM,
Numerical Implementation on the Hovering Performance of Contra-Rotating Ducted Rotor for Micro Air Vehicle, Microsys Technol. 26(11):3569-3580
6. Sang Wook LEE, Soo-Whang BAEK*,
Implementation and Experimental Verification of Smart Junction Box for Low-Voltage Automotive Electronics in Electric Vehicles, Appl. Sci. 10(7):2214
5. Soo-Whang BAEK and Sang Wook LEE*,
Design Optimization and Experimental Verification of Permanent Magnet Synchronous Motor Used in Electric Compressors in Electric Vehicles, Appl. Sci. 10(9):3235
4. Wan-Chin Kim* and Sang Wook Lee,
Structural Design of 3D Printer Nozzle with Superior Heat Dissipation Characteristics for Deposition of Materials with High Melting Point, Journal of the KIECS. 15(2):313-318
3. Sang Wook LEE and Soo-Whang BAEK*,
A study on the improvement of the cam shaft phase control performance of an electric continuous variable valve timing system using a cycloid reducer and BLDC motor, Microsys Technol. 26(1) :59-70.
2. Sang Wook LEE*, Soo-Whang BAEK, and Chulsoo KIM,
Improvement of defrost performance of electric vehicles using multi-phase flow simulation, ASME ISPS2020-1930
1. Soo-Whang BAEK and Sang Wook LEE*,
Aerodynamic drag reduction on a realistic vehicle using continuous blowing, Microsys Technol. 26(1) :11-23.
10. Sang Wook LEE*, Haklim KIM,
Numerical Study of Active Aerodynamic Control via Flow Discharge on a High-Camber Rear Spoiler of a Road Vehicle, Appl. Sci. 9(22), 4783.
9. 김영찬, 이인재, 박정빈, 장유정, 우솔휘, 이슬이, 백수황, 이상욱*,
KSAE 자작 전기자동차 트랙션 모터의 냉각 성능 개선에 관한 연구, 한국자동차공학회 추계학술대회 및 전시회, Nov. 2019. (자작차 포스터부분 우수상 수상)
8. Soo-Whang BAEK, Sang Wook LEE, and Chul-Soo KIM*,
Experimental Verification of Use of Vacuum Insulating Material in Electric Vehicle Headliner to Reduce Thermal Load, Appl. Sci. 9(20), 4207
7. 백수황, 이상욱, 김철수,
전기차 기반의 1톤급 상용차용 전동식 컴프레서 모터의 최적설계, 한국자동차공학회 광주.호남지회 추계학술대회, Sep. 2019.
9. 차예린, 정유진, 이상욱,
열-유동 해석을 활용한 헤드램프 온도분포 예측, 한국자동차공학회 광주.호남지회 추계학술대회, Sep. 2019.
6. 이상욱, 백수황, 김철수,
비정상 열-유동 해석을 통한 전기자동차 히트 펌프 시스템에서의 제상성능 예측, 한국자동차공학회 광주.호남지회 추계학술대회, Sep. 2019.
5. 좌승현, 이상욱, 김철수,
자동차 내외부 유동해석을 위한 오픈소스 CFD 프로그램의 활용, 한국자동차공학회 광주.호남지회 춘계학술대회, Apr. 2019 (우수논문상 수상)
4. 차예린, 이상욱,
전산유체역학을 활용한 헤드램프 열-유동장 해석에 관한 연구, 한국자동차공학회 광주.호남지회 춘계학술대회, Apr. 2019 (우수논문상 수상)
3. Sang Wook LEE and Soo-Whang BAEK*,
A study on the high insulation interior material for electric vehicle to reduce heating and cooling heat load, ASME ISPS2019-7491
2. Sang Wook LEE and Soo-Whang BAEK*,
Optimal design of electric compressor motor for commercial electric vehicle integrated air conditioning system, ASME ISPS2019-7427
1. Sang Wook LEE* and Jongkwon KIM,
Aerodynamic characteristics of co-axial rotor in duct, ASME ISPS 2019-7402 (Best paper award of ASME ISPS 2019 conference. USA, San Francisco)
6. Sang Wook Lee*,
Computational Analysis of Air Jet Wheel Deflector for Aerodynamic Drag Reduction of Road Vehicle, MicroSys Technol, 24(11) 4454-4463.
5. 좌승현, 이상욱, 김철수,
오픈소스 CFD 프로그램을 이용한 자동차 공기 유동 해석에 관한 연구, 한국 자동차 공학회 2018년 추계 학술대회, Nov. 2018
4. 이상욱, 김철수,
공기분사를 이용한 차량의 항력저감에 관한 수치적 연구, 한국 자동차 공학회 2018년 추계 학술대회, Nov. 2018
3. 이상욱*,
오픈폼을 활용한 자동차 공기유동 해석, 한국전산유체공학회지, Vol. 23, No. 3, pp. 79-85, 2018.
2. 이상욱*,
근사 차량 모델을 이용한 차량의 자세가 주행저항에 미치는 영향에 관한 연구, 한국자동차공학회지, Vol. 26, No. 5, pp. 612-619, 2018.
1. Sang Wook LEE,
Development of Active Aerodynamic Improvement Devices for Automobiles, ASME 2018 Conference on ISPS, ISPS2018-8523, 2018.
4. 이상욱, 공개 유동해석 프로그램을 이용한 차량의 자세가 주행저항에 미치는 영향에 관한 연구,
한국 자동차 공학회 2017년 추계 학술대회, Nov. 2017
3. 이상욱*, 주행하는 자동차의 와이퍼 부상방지를 위한 공력 형상 연구,
호남대학교 정보통신기술 논문지, Vol. 25, No. 1, pp. 59-70, 2017.
2. 이상욱*, 공개 유동해석 프로그램을 이용한 자동차 공력해석,
호남대학교 정보통신기술 논문지, Vol. 25, no. 1, pp. 47-58, 2017.
1. Sangwook LEE, Vehicle Aerodynamic Drag Reduction Using Air Jet System,
ASME 2017 Conference on ISPS, ISPS2017-5442, 2017. (Best paper award)
34. 이정우, 이상욱, 박건일, Active air shutter 효율 증대를 위한 차량 전면부 최적 설계,
한국 자동차 공학회 2016년 추계 학술대회, Nov. 2016
33. 노효석, 이상욱, 노형주, 한외술, ECO driving Assistance System에 관한 소개,
한국 자동차 공학회 2016년 춘계 학술대회, May. 2016
32. 이상욱, 르노삼성 SM6 차량의 공력 성능 개발,
한국 자동차 공학회 2016년 춘계 학술대회, May, 2016, pp. 760-761.
31. 이상욱, 박홍철, 공기 분사 시스템을 이용한 휠 항력 저감에 관한 연구,
한국 자동차 공학회 2014년 추계 학술대회, Nov. 2014, pp. 993-994.
30. 이상욱, 민영기, 고윤명, 와이퍼의 부상 방지를 위한 공력 형상 개발,
한국 자동차 공학회 2013년 추계 학술대회, Nov. 2013, pp. 1057-1058.
29. Hyosig KIM and Sangwook LEE, Simulation of Air Flow-induced Interior Noise with Hybrid Modeling Method,
한국소음진동공학회 2012년 추계학술대회논문집, pp. 354~355.
28. 오장현, 이상욱, 안병의, 고속주행시 주변 부품이 후드 유지력에 미치는 영향,
한국 자동차 공학회 2012년 추계 학술대회, Nov. 2012, pp. 1619-1625.
27. 이상욱, 안병의, 승용 차량의 항력 감소를 위한 차체 하부 페어링 개발,
한국 자동차 공학회 2012년 추계 학술대회, Nov. 2012, pp. 1892-1898.
26. 이상욱, 박종훈, 지은식, 안병의, 엔진 언더커버가 차량의 공력/열적 성능에 미치는 영향,
한국 자동차 공학회 2012년 추계 학술대회, Nov. 2012. pp. 1909-1916.
25. 김연수, 이상욱, 오기탁, Cowl Plenum Box에서 공기 역학적인 성능과 물의 거동에 대한 예측,
한국 자동차 공학회 2011년 추계 학술대회, Nov. 2011. pp. 564-570.
24. 이상욱, 김연수, 오기탁, 지면효과가 차량의 공력 성능에 미치는 영향,
한국 자동차 공학회 2011년 추계 학술대회, Nov. 2011. pp. 1753-1759 (우수발표논문상)
23. 이상욱, 오기탁, 휠의 형상이 차량의 공력 성능에 미치는 영향,
한국 자동차 공학회 2011년 춘계 학술 대회, May, 2011. pp. 1631-1637.
22. 이상욱, 해치백 차량에서 리어 스포일러의 공력성능에 대한 연구,
한국 자동차 공학회 2010년 추계 학술대회, Nov., 2010, pp. 2251-2256
21. Sang Wook Lee and Oh Joon Kwon*, Multi-Point Aerodynamic Shape Optimization of Rotor Blades Using Unstructured Meshes,
IJASS, Vol.8, No.1, pp.66-78, May, 2007.
20. 오기탁, 김진호, 이상욱*, 김연수, 하진욱, 강원구, 전산유체역학을 이용한 자동차 엔진룸의 열 및 유동장 해석,
한국 전산유체공학회지, Vol. 12, No. 1, pp. 22-27, 2007.
19. Sang Wook Lee and Oh Joon Kwon*, Aerodynamic Shape Optimization of Hovering Rotor Blade in Transonic Flow Using Unstructured Meshes,
AIAA Journal, Vol. 44, No. 8, pp. 1816-1825, 2006.
18. Sang Wook Lee and Oh Joon Kwon*, Robust Airfoil Shape Optimization Using Design For Six Sigma,
Journal of Aircraft, Vol. 43, No. 3, pp. 843-846, 2006.
17. 정문승, 이상욱, 권오준*, 허기훈, 변우식, 비정렬 중첩격자기법을 이용한 유도무기의 기체분리운동 모사,
한국 항공우주학회지, Vol. 34, No. 5, pp. 19-29, 2006.
16. 이상욱, 권오준, 비정렬 적응 격자계를 이용한 헬리콥터 로터 블레이드의 다점 공력 최적설계,
한국 항공 우주 학회 2005년 추계 학술발표회, 평창, Nov. 10-11, 2005.
15. 정문승, 이상욱, 권오준, 허기훈, 변우식, 비정렬 중첩격자기법을 이용한 유도무기의 기체 분리 해석,
제 13차 유도무기 학술대회, 대전, Oct. 6-7, 2005. pp. 296-299.
14. 이상욱, 권오준*, 비정렬 격자계에서 연속 Adjoint 방법을 이용한 헬리콥터 로터 블레이드의 제자리 비행 공력 형상 최적설계,
한국 항공우주학회지, Vol. 33, No. 1, pp. 1-10, 2005.
13. Sang Wook Lee and Oh Joon Kwon*, 2-D Robust Design Optimization on Unstructured Meshes,
5th Asian CFD Conference, BEXCO, BUSAN, KOREA, Oct. 27-30, 2003, pp. 240-242.
12. Sang Wook Lee and Oh Joon Kwon*, Multi-point Aerodynamic Shape Optimization of Rotor Blades Using Unstructured Meshes,
30th European Rotorcraft Forum, Marseilles, France, Sep. 14-16, 2004.
11. Sang Wook Lee and Oh Joon Kwon*, Aerodynamic Shape Optimization of Rotor Blades in Hover Using Unstructured Meshes,
American Helicopter Society, 60th Annual Forum, Baltimore, Maryland, June 7-10, 2004.
10. 이상욱, 권오준, 비정렬 격자계를 이용한 로터 블레이드 다점 최적설계,
한국 슈퍼컴퓨팅 워크숍 2004, 대전, Oct. 4-6, 2004. pp. 441-454.
9. 이상욱, 권오준, 비정렬 격자계에서 adjoint 민감도 해석 기법을 이용한 공력형상 최적설계,
제 3회 한국 유체공학 학술대회, Aug. 2004, pp. 133.
8. 이상욱, 권오준, 헬리콥터 로터 블레이드의 정지비행 공력 최적설계,
한국항공우주학회 2004년 춘계 학술발표회, Apr. 2004, pp. 43-46.
7. Sang Wook Lee and Oh Joon Kwon*, Parallel 3-D Aerodynamic Shape Optimization on Unstructured Meshes,
IJASS, Vol.4, No.1, pp.45-52, May, 2003.
6. 이상욱, 권오준*, 비정렬 격자계에서 Continuous Adjoint 방정식을 이용한 공력 형상 최적 설계,
한국 항공우주학회지, Vol. 30, No. 4, pp. 18-28, 2002.
5. Sang Wook Lee and Oh Joon Kwon*, Aerodynamic Shape Optimization by Using a Continuous Adjoint Method on Unstructured Meshes,
JSASS 16th International Sessions in 40th Aircraft Symposium, Incorporating Japan-Korea Joint Symposium 2002, Yokohama Port-Opening Memorial Hall, Yokohama, Japan, Oct. 9-11, 2002, pp. 95-98.
4. 이상욱, 권오준, 비정렬 격자계에서 Continuous Adjoint 방정식을 이용한 공력 형상 최적설계에 관한 연구,
한국항공우주학회 2001년 추계 학술발표회, Nov. 2001, pp. 435-438.
3. 이상욱, 권장혁, 선형 격자 형성 방정식을 이용한 직교격자 형성에 관한 연구,
한국 전산유체공학회 2000년 춘계학술발표회, May 2000, pp. 99-106.
2. Sang Wook Lee and Jang Hyuk Kwon*, Orthogonal Grid Generation for Three-Dimensional Bodies Using the Covariant Laplace Equation with Control of Spacing,
7th International Grid Generation in Computational Field Simulations. Numerical Grid Generation in Computational Field Simulations, Chateau Whistler Resort, Whistler, British Columbia, Canada, Sep. 25-28, 2000, pp. 179-188.
1. 이상욱, 권장혁*, 권오준, 선형 격자 형성 방정식을 이용한 직교 격자 형성에 관한 연구,
한국 전산유체공학회지, Vol. 5, No. 1, pp. 14-21, 2000.
1. Orthogonal Grid Generation Using Linear Grid Generating Equations, Matster Thesis, KAIST, 2000.
2. Aerodynamic Shape Optimization of Helicopter Rotor Blades Using an Adjoint Method, Ph.D Thesis, KAIST, 2006.