Journals
[54] Suvam Swayam Mohapatra, Seshadev Sahoo, Effect of Casting Length on Solidification of Al-33 wt% Alloy in Twin-Roll Casting, Lecture Notes in Mechanical Engineering (2023), 415-421. Link
[53] Bibhu Kalyan Panda, Seshadev Sahoo, Cheruvu Siva Kumar, Ashish Kumar Nath, Simulation of microstructure evolution for laser-powder bed fusion process of AlSi10Mg alloy, Materials Today: Proceedings 74 (2023), 655-658. Link
[52] Virendra Patel, Anshul Yadav, Seshadev Sahoo, Direndranath Thatoi, Numerical study on the effect of dynamic contact angle on air entrapment and spreading of hollow droplet impacting on a surface, Microgravity Science and Technology 34 (2022), 1-11. Link
[51] Seshadev Sahoo, Prognostication of microstructure evolution during laser powder bed fusion of aluminum alloy using phase-field method, Journal of Laser Applications 34 (2022), 022014. Link
[50] Sweta Rani Biswal, Seshadev Sahoo, Structural and mechanical properties of a novel Al-Al2O3-WS2 hybrid composites, Materials Letters 307 (2022), 131017. Link
[49] Seshadev Sahoo, Prediction of residual stress and deformation of build part with variation of hatch spacing in direct metal laser sintering of AlSi10Mg built part: Thermo-mechanical modeling, Journal of Laser Applications 33 (2021), 032011. Link
[48] Jyotirmoy Nandy, Seshadev Sahoo, Hrushikesh Sarangi, Rama Krushna Sabat, Evaluation of Structural and Mechanical properties of high strength aluminum alloy components fabricated using laser powder bed fusion process, Journal of Laser Applications 33 (2021), 032009. Link
[47] Seshadev Sahoo, Self-lubricating composites with 2D materials as reinforcement: A new perspective, Reinforced Plastics 65 (2021), 101-103. Link
[46] Jyotirmoy Nandy, Seshadev Sahoo, Hrushikesh Sarangi, Study on shape dependency of Al-alloy nanoparticles during coalescence in direct metal laser sintering: A molecular dynamics approach, Materials Today: Proceedings 41 (2021), 347-351. Link
[45] Sweta Rani Biswal, Tapasmini Sahoo, Seshadev Sahoo, Prediction of grain boundary of a composite microstructure using digital image processing: A comparative study, Materials Today: Proceedings 41 (2021), 357-362. Link
[44] Ghulam Rasul Nazami, Bibhu Kalyan Panda, Seshadev Sahoo, Finite element simulation of residual stress in direct metal laser sintering of AlSi10Mg built part: Effect of laser spot overlapping, Materials Today: Proceedings 41(2021), 445-450. Link
[43] Seshadev Sahoo, Direct metal laser sintering of AlSi10Mg alloy parts: Modeling of temperature profile, Materials Today:Proceedings 35 (2021), 118-123. Link
[42] Seshadev Sahoo, Sambit Samal, Bhagyadhar Bhoi, Fabrication and characterization of novel Al-SiC-hBN self-lubricating hybrid composites, Materials Today Communications 25 (2020), 101402. Link
[41] Ghulam Rasul Nazami, Seshadev Sahoo, Influence of hatch spacing and laser spot overlapping on heat transfer during laser powder bed fusion of aluminum alloy, Journal of Laser Applications 32 (2020), 042007. Link
[40] Virendra Patel, Anshul Yadav, Seshadev Sahoo, Dhirendranath Thatoi, Jerzy Winczek, A novel fixed-grid interface tracking algorithm for rapid solidification of supercooled liquid metal, Numerical Heat Transfer, Part A: Applications 78 (2020), 306-320. Link
[39] Seshadev Sahoo, Consolidation behavior of metal powders in laser additive manufacturing, Metal Powder Report 2020 (In Press). Link
[38] Jyotirmoy Nandy, Seshadev Sahoo, Natraj Yedla, Hrushikesh Sarangi, Molecular dynamics simulation of coalescence kinetics and neck growth in laser additive manufacturing of aluminum alloy nanoparticles, Journal of molecular modelling 26 (2020), 125. Link
[37] Sweta Rani Biswal, Seshadev Sahoo, Fabrication of WS2 Dispersed Al-Based Hybrid Composites Processed by Powder Metallurgy: Effect of Compaction Pressure and Sintering Temperature, Journal of Inorganic and Organometallic Polymers and Materials 30 (2020), 2971-2978. Link
[36] Subhasisa Nath, David Waugh, Graham Ormondroyd, Morwenna Spear, Andy Pitman, Seshadev Sahoo, Simon Curling, Paul Mason, CO2 laser interactions with wood tissues during single pulse laser-incision, Optics and Laser Technology 126 (2020), 106069. Link
[35] S K Pradhan, S N Das, S Bhuyan, S Sahoo, RNP Choudhary, Temperature and Frequency Dependent Multiferroic Features of Gadolinium Doped BiFeO3-PbTiO3 Electronic System, Transactions on Electrical and Electronic Materials 21 (2020), 175-190. Link
[34] Mihir Samantaray, Dhirendra Nath Thatoi, Seshadev Sahoo, Finite Element Simulation of Heat Transfer in Laser Additive Manufacturing of AlSi10Mg Powders, Materials Today: Proceedings 22 (2020), 3001-3008. Link
[33] Jyotirmoy Nandy, Natraj Yedla, Hrushikesh Sarangi and Seshadev Sahoo, Sintering of AlSi10Mg particles in direct metal laser sintering process: A molecular dynamics simulation study, Materials Chemistry and Physics 236 (2019), 121803. Link
[32] Mihir Samantaray, Seshadev Sahoo, Dhirendranath Thatoi, Modeling of thermal and solidification behavior during laser additive manufacturing of AlSi10Mg alloy powders and its experimental validation, Journal of Laser Applications 31 (2019), 032019. Link
[31] Mihir Samantaray, Direndranath Thatoi, Seshadev Sahoo, Modeling and Optimization of Process Parameters for Laser Powder Bed Fusion of AlSi10Mg Alloy, Lasers in Manufacturing and Materials Processing 6 (2019), 356-373. Link
[30] Jyotirmoy Nandy, Hrushikesh Sarangi and Seshadev Sahoo, A Review on direct metal laser sintering: process features and microstructure modeling, Lasers in Manufacturing and Materials Processing, 6 (2019), 280-316. Link
[29] Bibhu Kalyan Panda and Seshadev Sahoo, Thermo-mechanical modeling and validation of stress field in AlSi10Mg single built layer during direct metal laser sintering process, Results in Physics 12 (2019), 1372-1381. Link
[28] Seshadev Sahoo, An approach toward multiscale modeling of direct metal laser sintering process, Metal Powder Report 74 (2019), 72-76. Link
[27] M. Caccia, M. Tabandeh-Khorshid, G. Itskos, A. R. Strayer, A. S. Caldwell, S. Pidaparti, S. Singnisai, A. D. Rohskopf, A. M. Schroeder, D. Jarrahbashi, T. Kang, Seshadev Sahoo, N. R. Kadasala, A. Marquez-Rossy, M. H. Anderson, E. Lara-Curzio, D. Ranjan, A. Henry & K. H. Sandhage, Ceramic-metal composites for heat exchangers in concentrated solar power plants, Nature 562 (2018), 406-409. Link
[26] M. Samantray, Seshadev Sahoo, D.N. Thatoi, Computational modeling of heat transfer and sintering behavior during direct metal laser sintering of AlSi10Mg alloy powder, C. R. Mecanique 346 (2018), 1043-1054. Link
[25] Jyotirmoy Nandy, Hrushikesh Sarangi and Seshadev Sahoo, Microstructure evolution of Al-Si-10Mg in direct metal laser sintering using phase field modelling, Advances in Manufacturing 6 (2018), 107-117. Link
[24] SN Das, SK Pardhan, S Bhuyan, Seshadev Sahoo , RNP Choudhary, MN Goswami, Dielectric and Impedance Characteristics of Nickel-Modified BiFeO 3-BaTiO3 Electronic Compound, Journal of Electronics Materials 47 (2018), 843-854. Link
[23] Jyotirmoy Nandy, Seshadev Sahoo and Hrushikesh Sarangi, A microstructure modeling and neck growth analysis of laser sintered AlSi10Mg nanoparticles, Asian Journal for Convergence in Technology 4 (2018), 1-6. Link
[22] Jyotirmoy Nandy, Seshadev Sahoo, Hrushikesh Sarangi, Bibhu Kalyan Panda, Phase Field Modeling of Coalescence of AlSi10Mg Particles in Direct Metal Laser Sintering, International Journal of Engineering & Technology (UAE) 7 (2018), 330-334. Link
[21] Akash Ojha, Mihir Samantaray, Dhirendra Nath Thatoi, Seshadev Sahoo, Continuum simulation of heat transfer and solidification behavior of AlSi10Mg in direct metal laser sintering process, IOP Conference Series: Materials Science and Engineering 338 (2018), 012052. Link
[20] Bubloom Bimal Satpathy, Jyotirmoy Nandy, Seshadev Sahoo, Investigation of consolidation kinetics and microstructure evolution of Al alloys in direct metal laser sintering using phase field simulation, IOP Conference Series: Materials Science and Engineering 338 (2018), 012045. Link
[19] Bibhu Kalyan Panda, Seshadev Sahoo, Numerical simulation of residual stress in laser based additive manufacturing process, IOP Conference Series: Materials Science and Engineering 338 (2018), 012030. Link
[18] S Halder, S Bhuyan, SN Das, Seshadev Sahoo, RNP Choudhary, P Das, K Parida, Structural, morphological, dielectric and impedance spectroscopy of lead-free Bi(Zn 2/3 Ta 1/3) O 3 electronic material, Applied Physics A 123 (2017), 781. Link
[17] Seshadev Sahoo, Simulation study on rapid solidification of eutectic Al-Cu alloy: A Molecular Dynamics approach, International Journal of Computational Materials Science and Surface Engineering 7 (2017), 18-25. Link
[16] Chinmaya Mund, D. N. Thatoi and Seshadev Sahoo, Analysis of heat transfer and solidification characteristics of Al-4.5Cu in a top side pouring high speed twin toll strip caster, Heat Transfer Research 48 (2017), 1693-1706. Link
[15] Jyotirmoy Nandy, Hrushikesh Sarangi, Seshadev Sahoo, Modeling of microstructure evolution in direct metal laser sintering: a phase field approach, IOP conference series: materials science and engineering 178 (2017), 012028. Link
[14] Chinmaya Mund, D. N. Thatoi and Seshadev Sahoo, Effect of Nozzle Shape on solidification behaviour in high speed Twin Roll Strip Caster: A Simulation Approach, Advances in Materials and Processing Technologies 2 (2016), 367-376. Link
[13] Seshadev Sahoo, Review on Vertical Twin roll strip casting process: A Key technology to produce quality strips, Journal of Metallurgy 2016 (2016), 1-13.
[12] Seshadev Sahoo and Kevin Chou, Phase-field simulation of microstructure evolution of Ti-6Al-4V in electron beam additive manufacturing process, Additive Manufacturing 9 (2016), 14-24. Link
[11] Seshadev Sahoo and Sudipto Ghosh, Microstructure evolution of eutectic Al-Cu strips by high speed twin roll strip casting, Journal of Applied Physics A 121 (2015), 45-50. Link
[10] Seshadev Sahoo, Effect of process parameters on solidification of Al-33Cu strip in high speed twin roll strip casting-A numerical study, IOP Conference Series: Materials Science and Engineering 75 (2015), 012013. Link
[9] Seshadev Sahoo, Microstructure Simulation of Ti-6Al-4V biomaterial produced by Electron Beam Additive Manufacturing process, International Journal of Nano and Biomaterials 5 (2014), 228-235. Link
[8] Seshadev Sahoo and Sudipto Ghosh, Heat transfer, solidification and microstructure evolution in Al-33Cu alloy during the starting of twin roll strip casting, Steel Research International 85 (2014), 207-218. Link
[7] Seshadev Sahoo, Kevin Chou, Phase field simulation of microstructural evolution of Ti-6Al-4V in electron beam additive manufacturing process, Materials Science and Technology Conference & Exhibition 2014, MS and T 2014, 2 (2014), 2117-2124. Link
[6] Seshadev Sahoo, Kevin Chou, Review on phase-field modeling of microstructure evolutions: application to electron beam additive manufacturing, International Manufacturing Science and Engineering Conference 45813 (2014),1-9, American Society of Mechanical Engineers. Link
[5] Karthik V., Seshadev Sahoo, S. K. Pabi, S. Ghosh, On the phononic and electronic contribution to the enhanced thermal conductivity of water based silver nanofluids, International Journal of Thermal Science 64 (2013), 53-61. Link
[4] Seshadev Sahoo, Amitesh Kumar, B.K. Dhindaw and Sudipto Ghosh, High Speed Twin Roll Casting of Al-Cu strips with Layered Structure, Materials and Manufacturing Processes 28 (2013), 61-65. Link
[3] Seshadev Sahoo, Amitesh Kumar, B.K. Dhindaw and Sudipto Ghosh, Modeling and Experimental Validation of Rapid Cooling and Solidification during High-Speed Twin- Roll Strip Casting of Al-33wt pct Cu, Metallurgical and Materials Transactions B 43 (2012), 915-924. Link
[2] Seshadev Sahoo and Sudipto Ghosh, Effect of rolling speed on microstructure of Al-33wt.% Cu alloy strip prepared by twin roll strip casting, Materials Science Forum 710 (2012), 192-196. Link
[1] Amitesh Kumar, Seshadev Sahoo, Sudipto Ghosh, B. K. Dhindaw, Effect of process parameters on splat formation during impingement of liquid metal droplets over a cold substrate, Materials science Forum 710 (2012), 186-191. Link
Books/Book Chapters
[1] Seshadev Sahoo and J. Nandy, Multiscale Modeling of the Laser Additive Manufacturing Process. In Balasubramanian, K., Senthilkumar, V. (Ed.), Additive Manufacturing Applications for Metals and Composites, 2020, 235-248, IGI Global.
[2] Seshadev Sahoo, B. C. Ray, A. Mallik, Sono-Electrodeposition of thin films: A study on effect of operating parameters on electrochemical deposition of metallic thin films in presence of ultrasound, LAP LAMBERT Academic Publishing, Germany, 2010, ISBN – 13: 978-3-8433-6265-8.
[3] Seshadev Sahoo and Sudipto Ghosh, High speed twin roll casting of Al-33 wt.% Cu strips with layered structure-Inspired by mathematical modelling, Materials Processing Fundamentals, John Wiley and Sons, USA, 2013, 143-149, ISBN: 9781118605981.
[4] M. Samantaray, D.N. Thatoi, Seshadev Sahoo, An Approach to Numerical Modeling of Temperature Field in Direct Metal Laser Sintering Lecture Notes on Multidisciplinary Industrial Engineering, Advances in Materials, Mechanical and Industrial Engineering, Springer, 2018, ISBN: 978-3-319-96967-1.