We study the dynamics, wear and shock response of high-performance machines, from aero-engine rotors to protective structures.
Research Areas
Rotordynamics of Aero Engines (Curvic and Hirth couplings)
Tribology and Wear Testing
Blast and Shock Response Analysis
Vibration and Modal Testing
Tools We Use
Simulation: ANSYS, LS-DYNA, MATLAB
CAD: SolidWorks, CATIA
Measurement: DEWESoft (vibration and modal testing)
Test Equipment: Pin/Ball-on-Disc Tester (MPW110), Reciprocating Wear Tester (RFW160, up to 800 °C), Surface Profiler
Blast and Shock Response Analysis (폭발·충격 구조 응답 해석 )
We study how blast waves load protective structures and how the resulting shock reaches the equipment inside.
Test Data Analysis
Signal processing of blast pressure and acceleration data from full-scale shock tube tests.
Blast Load Reconstruction
Estimating the loads on every face of a structure from a single pressure measurement.
Explicit FE Analysis (LS-DYNA)
Transient simulation of structural response, validated against measured acceleration.
Shock Response Spectrum (SRS)
Quantifying the shock severity that on-board equipment must withstand.
Pin/Ball-on-Disc Wear Test (핀-온/볼-온 디스크 마모시험기)
Rotary sliding friction and wear testing of metals, ceramics, composites, coatings and lubricants. (NEO-TRIBO MPW110)
Test Capabilities
Pin-on-disc and ball-on-disc tests (ASTM G99)
Normal load 5–500 N, speed 1–1,500 rpm
Dry, water-lubricated, and heated conditions (room temperature to 150 °C)
Real-time friction coefficient, wear depth (0.5 μm resolution), and disc temperature
Applications
Material and coating screening, lubricant evaluation, temperature-dependent wear of rotating contacts
Reciprocating Wear Test (왕복동 마모 시험기)
Reciprocating sliding tests reproducing fretting and micro-slip contacts in bearings and couplings. (NEO-TRIBO RFW160)
Test Capabilities
Normal load 5–200 N, stroke 0.2–10 mm, frequency up to 12 Hz
Room temperature to 800 °C heated stage (specimen at 485 °C verified)
Friction coefficient and wear depth in real time; wear loss (0.0001 g balance)
Applications
High-temperature wear of gas turbine and aero-engine materials (curvic couplings), ball screw material pairs, Archard wear coefficient for life prediction
Wear Surface Analysis (마모면 분석)
Surface Profiler: 2D roughness and wear-track profile (wear depth, cross-sectional area)
Precision Balance: Wear loss with 0.0001 g resolution
SEM: Worn-surface morphology and wear mechanism analysis
Testing Services (시험 의뢰)
We provide friction and wear testing for industry and research partners. Results include friction curves, specific wear rate, wear coefficient, and worn-surface analysis (SEM, roughness), along with wear mechanism interpretation.
마찰·마모 시험 및 분석 의뢰를 받고 있습니다. 시험 조건과 시편에 대해 편하게 문의해 주세요.
Dynamics and Vibrations (동역학 및 기계진동): The foundation of rotor vibration and modal testing
Solid Mechanics (고체역학): Stress and contact analysis of couplings and structures
Numerical Analysis (수치해석): MATLAB coding for signal processing and in-house solvers
Engineering Programming (공학프로그래밍): Data processing and automation in MATLAB and Python
Finite Element Method (유한요소법): ANSYS and LS-DYNA simulation, and our in-house FE code
Rotordynamics (회전체 동역학, graduate): Advanced analysis of rotor systems
학부연구생 모집
위 과목을 모두 듣지 않았어도 괜찮습니다. 실제 연구 과제에 참여하면서 CAD, 유한요소해석, 실험을 단계별로 배웁니다.
항공엔진, 마모, 충격 해석에 관심 있는 학생은 언제든 연락 주세요.