As we all know, Amazon Fire stick is an easy way to both stream live TV, media services and add premium channels like HBO or ESPN. However, sometimes you may have difficulties operating its remote. Are you suffering from the same condition? Is your firestick remote not working at all properly? If yes, then you are at the right point. In this article, we are going to give some tips by which you can resolve your Amazon Fire stick remote related issues and get it back smoothly and working properly.

Tips to resolve issues related to Amazon Fire Stick: -

Unplug the firearms from the terminal for 1 minute and plug it back in. Many times, a quick restart of Fire Stick or Fire TV can resolve the case and present you with a well-operating remote control in a short time.

If the above tip doesn't work for you, take out the batteries and put them back in again. Try replacing the old batteries with new ones, sometimes, the problem can also be caused by dead batteries.

If the problem persists, also check for the conditions below.

Check if your Fire Stick remote is fully ready.

If your firestick remote is not working, chances are it is not connected properly. Typically, FireStick is already paired with the device.

In the event of this not happening, here are the steps by which you can pair your igneous pair with the device.

First, plug in the HDMI port of your TV into your FireStick.

Now, turn on the firestick along with the power of your TV.

Once the firestick boots, hold down the home button of your remote for at least 10 seconds.

This will pair Amazon Firestick with your device and it will start working.

In case, your device is not connected to FireStick, you can repeat this process and press the Home button for another 10 seconds. As, on many occasions, it does not add up to one attempt and has to be done several times. Thus, do not panic when you do not connect in one try and try again.

Check if your fire stick remote is broken

If you have tried all the solutions and replaced the battery and still cannot figure out what the problem is, then chances are your FireStick remote is damaged.

In such cases, you can replace it with a new remote. The good news is that the new Fire Stick remote comes at a price of $ 10 with additional buttons for Netflix and other applications.

Apart from this, some of them also come with volume control buttons. You can look for it on the Amazon application as it is readily available there. However, be sure to purchase a well-reviewed Fire Stick remote.

Amazon Fire TV Remote Application: Try Backup, if you find that your Fire Stick remote control is not working for some reason or has run out of battery, you can install the Amazon Fire TV Remote application which is accessible on both Android as well as iOS programs.

Using this application, your phone will turn into a TV remote and you can easily operate it without any problem.

However, make sure that both your device and Amazon Fire TV are connected to the same WiFi.

We also Additional solution: -

On some occasions, the cause of the issue may be related to the remote's distance from the TV. The Fire Stick Remote works efficiently within a range of 10 feet. So, if by any means you have a large space room, try bringing the remote fire to Amazon Fire TV.

If you have attached the device within a cabinet, there is a possibility that it may not operate well. However, it operates with the help of Bluetooth, no infrared rays, you can still try to take your device out of the cabinet and then check if the remote is working.

Try not to place any electrical equipment near your fire stick, as it may conflict with the signal and cause errors. Thus, make sure that your Amazon Fire Stick does not have any electrical devices.