The asterisk card TDM800P is bundled with 4 DUAL FXO / FXS modules,total 8 FXO / FXS ports.
The FXO module is red ,connects a PSTN line (traditonal telephone line).
The FXS module is green, connects an analog telephone (traditonal telephone).
You can get any combination of FXO & FXS modules without any additional cost.
The FXS FXO card is compatible with Asterisk,FreePBX,Issabel,Dahdi,Free PBX... with the card,users can build an Asterisk PBX,IP telephone system for home or business.
- Interface : PCI
- With low profile for 2U computer / server
-The Asterisk card TDM800P is a half-length PCI 2.2-compliant card that supports FXS and FXO station interfaces for connecting analog telephones and analog POTS lines through a PC.
-It's a PCI Card for Asterisk,FreePBX,Issabel,Free PBX and other Open Source Telephony projects
-The card is fully compatible with all similar analog cards and modules with no changes to the drivers.
-FXO modules are used to plug existing analog telephone lines into your phone system.
With the Asterisk card TDM800P, Open Source Asterisk PBX software and a standard PC, users can create a Small Office Home Office (SOHO) telephony environment which includes all the sophisticated features of a high-end PBX/Voicemail platform.
Scalable and Effective SOHO Solution, Target Applications
-Small Office Home Office (SOHO) applications
-Gateway Termination to Analog Telephones
-Add Inexpensive Analog Phones to Existing PBXs
-Voice over IP Telephone System,Asterisk PBX Server
TDM800P Services and Features
- Telephone System for Home / Business
- Asterisk PBX
- SIP Phone System
- Asterisk Open-Source Phone System
- VoIP PABX Telephone Solution
- Call Center
- Free PBX Asterisk Voice Server
- PSTN Telephone PABX System
-Supports Asterisk,FreePBX,Issabel,Dahdi,Free PBX,...
-Interface : FXS / FXO (RJ11)
TDM800P
Modules
Motherboard: TDM800P(PCI)
Dual FXO modules FXO-200 : 0~4 pcs
Dual FXS modules FXS-200 : 0~4 pcs
Hardware Requirement
500-Mhz Pentium III or better with 64MB RAM
- Issabel / FreePBX / Free PBX Settings :
[ChinaRoby.localdomain ~]# dahdi_genconf
[ChinaRoby.localdomain ~]# dahdi_cfg -vvvv
DAHDI Tools Version - 2.2.0
DAHDI Version: 2.2.0
Echo Canceller(s): MG2
Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 04)
Channel 05: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 05)
Channel 06: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 06)
Channel 07: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 07)
Channel 08: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 08)
[ChinaRoby.localdomain ~]# asterisk -vvr
ChinaRoby*CLI> dahdi show channels
Chan Extension Context Language MOH Interpret Blocked State
pseudo default en default In Service
1 from -pstn en default In Service
2 from-pstn en default In Service
3 from-pstn en default In Service
4 from-pstn en default In Service
5 from-pstn en default In Service
6 from-pstn en default In Service
7 from-pstn en default In Service
8 from-pstn en default In Service