Wifi Guide

Logging into Open Roberta

Watch the video or follow the steps below to connect your robot to wifi

Quick Guide:

• Use the directional buttons on the LEGO Robot to navigate to the wifi symbol and push the center button (enter).

• The robot may take several seconds to find all nearby wifi signals (If your robot displays "No APs detected", contact Sandra and/or Jennifer).

• Use the directional buttons to navigate to the name of the wifi and push the center button (enter).

• Enter your wifi password. 

  • Use the directional buttons to navigate to each character.

  • Use the enter button to select each character (if can't find a character for your password, contact Sandra and/or Jennifer. You may need to change the wifi password to make it compatible with the robot).

  • Select the "arrow button" to change the letters to Uppercase or lowercase.

  • Select "x arrow button " to delete characters.

  • Select "check mark symbol" to submit your password.

• The robot will run through a few protocols to connect you to the wifi.

  • When it's done you will see the wifi symbol in the top right corner of the robot's screen.

  • It will also have an IP address (long string of numbers) under the 10.0.1.1.

• That's it! You're robot is connected! (If it didn't work, let Sandra and/or Jennifer know as soon as possible.)

Connecting your Robot to Open Roberta

• Login to Open Roberta

• Make sure to select "EV3Lejos 0.9.1" 

• Click on the robot icon in your EV3 robot (see image to the right) and press the center button

• Select "lab.open.roberta.com".  Your robot will show you a random code.

• Enter the code into Open Roberta (see image to the right)

  • Click on "EV3" in the upper left corner of lab.open-roberta.org

  • Enter the random code and hit OK

  • The robot will play a chime when it's connected.

  • Robot must be connected to the wifi first.