Area of Research Interest
Incremental sheet forming (ISF)
CAD/CAM/CAE
Manufacturing processes
Non-conventional machining processes
Additive Manufacturing
Incremental sheet forming (ISF)
CAD/CAM/CAE
Manufacturing processes
Non-conventional machining processes
Additive Manufacturing
Rahul Jagtap, Sahil Bendure, Parshant Kumar and Ankush Sharma, 2022, Experimental and simulation studies on hybrid incremental sheet forming, Engineering Research Express, Vol. 4 (2), pp. 025038. doi.org/10.1088/2631-8695/ac73df (ESCI, Scopus).
S.R. More, D. V. Bhatt, J.V. Menghani, R. K. Jagtap, 2022 "CFD Simulation and Experimental Results Validation of Slurry Erosion Wear using Slurry Pot Test Rig ", Trends in Sciences, Vol. 19 (11), pp. 4524-4524. https://doi.org/10.48048/tis.2022.4524 (Scopus)
Rahul Jagtap and Shailendra Kumar, 2020, An experimental study on geometric accuracy in hybrid incremental sheet forming, Journal of Advances in Materials and Processing Technologies, Vol. 7 (4), pp. 684-695. 10.1080/2374068X.2020.1793263 (ESCI, Scopus)
Rahul Jagtap and Shailendra Kumar, 2019, “Optimization and modelling of thinning and geometric accuracy in incremental sheet forming combined with stretch forming”, International Journal of Material Engineering Innovation, Vol. 10 (1), pp. 2 - 19 DOI: 10.1504/IJMATEI.2019.097888. (Scopus)
Rahul Jagtap, Sachin Kashid, Shailendra Kumar and HMA Hussein, 2015, "An experimental study on the influence of tool path, tool diameter and pitch in single point incremental forming (SPIF)", Journal of Advances in Materials and Processing Technology, Vol. 1 (3-4), pp. 465 – 473. doi.org/10.1080/2374068X.2015.1128171 (ESCI, Scopus)
Two Papers have received Best Paper Award
Sahil Bendure, Ankush Sharma, Janhvi Patil, Jagadish Naik, Rahul Jagtap, 2022, Physico-chemical properties of compression molded glass fiber reinforced polypropylene polymer composites, In: International Conference on Current Trends In Physics And Photonics, MIT WPU, Maharashtra (9 - 11 June 2022). https://doi.org/10.1088/1742-6596/2426/1/012067 (Scopus)
Rahul Jagtap, Sahil Bendure, Parshant Kumar, Deepak Kumar, Anil Mashalkar, 2022, Mechanical & Tribological Behavior of random discontinuous glass fibre reinforce polypropylene, International Conference on Contemporary Innovations in Mechanical Engineering, RGM College of Engineering & Technology, Nandyal, AP. (22 - 23 April, 2022) - Best Paper Award
Kumar Sourav, Parshant Kumar, Rahul Jagtap, Anil Mashalkar, Deepak Kunar, 2022, Energy harvesting potential of a diamond shaped oscillator in FIV environment, International Conference on Contemporary Innovations in Mechanical Engineering, RGM College of Engineering & Technology, Nandyal, AP. (22 - 23 April, 2022) - Best Paper Award
Rahul Jagtap, Ganesh Kakandikar, Ajit Dhanawade and Satish More, 2021, Optimization of Wall Thickness and Geometric Accuracy in Stretch Forming combined with Incremental Sheet Forming using Grey Relational Analysis (GRA), Materials Today: Proceedings, Volume 44, Part 6, 2021, Pages 4393-4398. doi.org/10.1016/j.matpr.2020.10.574 (Scopus)
Ajit Dhanawade, Raju Bhosale, Rahul Jagtap, K A Sorate, 2021, Comparative study of Lead Zirconate Titanate Ceramic and Carbon Fiber Reinforced Polymer Composite Surfaces Machined by Abrasive Water Jet, Materials Today: Proceedings, Volume 44, Part 6, Pages 4628-4632. doi.org/10.1016/j.matpr.2020.10.918 (Scopus)
Rahul Jagtap, Vikas Sisodia, Kiran More and Shailendra Kumar, 2020, “Hybrid Incremental Forming: Investigation on Localized Thinning and Thickness Distribution in Formed Parts”, In: 4th International Conference on Innovative Design, Analysis & Development Practices in Aerospace and Automotive Engineering (I DAD – 2020), VEL Tech University, Chennai, India (February 24 – 26, 2020). (Scopus)
Vikas Sisodia, Shailendra Kumar, Rahul Jagtap, and Kiran More, 2020, Experimental Investigation on Geometric Error in Single-Point Incremental Forming with Dummy Sheet, In: 4th International Conference on Innovative Design, Analysis & Development Practices in Aerospace and Automotive Engineering (I DAD – 2020), VEL Tech University, Chennai, India (February 24 – 26, 2020). (Scopus)
Sunandkumar Gajjar, Vikas Sisodia, Rahul Jagtap, Kiran More, and Shailendra Kumar, 2020, Experimental Investigation on Geometric Accuracy and Surface Roughness of Formed Part in Multistage Single Point Incremental Forming (SPIF) Process, In: 4th International Conference on Innovative Design, Analysis & Development Practices in Aerospace and Automotive Engineering (I DAD – 2020), VEL Tech University, Chennai, India (February 24 – 26, 2020). (Scopus)
Rahul Jagtap and Shailendra Kumar, 2018, “An Experimental Investigation on Thinning and Formability in Hybrid Incremental Sheet Forming Process”, In: 14th Global Congress on Manufacturing and Management (GCMM – 2018), Brisbane, Australia (December 5 – 7, 2018). (Scopus)
Rahul Jagtap and Shailendra Kumar, 2018, “Incremental sheet forming: an experimental study on the geometric accuracy of formed parts”, In: Int. Conf. on Innovative design, Analysis and Development Practices in Aerospace and Automotive Engineering (I DAD – 2018), VEL Tech University, Chennai, India, (February 22-24, 2018). (Scopus)
Rahul Jagtap and Shailendra Kumar, 2017, “An experimental study on geometric accuracy in hybrid incremental sheet forming”, In: Int. Conf. on Advanced Materials and Processing Technologies (AMPT 2017), VIT Chennai. (December 11 – 14, 2017).
Rahul Jagtap, Amol Patil and Shailendra Kumar, 2015, “An experimental study on the effect of process parameters on surface roughness in single point incremental forming”, Proc. of The Third Intl. Conf. on Advances in Mechanical and Robotics Engineering - AMRE 2015, 10-11 October, 2015, Zurich, Switzerland, pp. 33-37. DOI: 10.15224/978-1-63248-066-8-60
Rahul Jagtap, Sachin Kashid, Shailendra Kumar and HMA Hussein, 2014, “An experimental study on the influence of tool path, tool diameter and pitch in single point incremental forming (SPIF)”, In: Int. Conf. on Advanced Materials and Processing Technologies (AMPT 2014),November 16-20, Atlantis, The Palm, Dubai, UAE.
Rahul Jagtap and Shailendra Kumar, 2013, “An experimental study on the influence of process parameters in single point incremental forming”, Int. Conf. on Industrial Engineering, 20-22 November 2013, SVNIT Surat, India.
Rahul Jagtap, Mehul Choudhari, and S. Kumar, 2016, “Experimental investigation on accuracy and surface roughness in single point incremental forming process”, 6thNational Conf. on Recent Advances in Manufacturing (12-14 May, 2016), SVNIT, Surat, pp. 137-142.
Balkesh, Rahul Jagtap and Shailendra Kumar, 2016, “An investigation on surface roughness in multistage incremental forming process”, 6thNational Conf. on Recent Advances in Manufacturing (12-14 May, 2016), SVNIT, Surat, pp. 149-154.
Pratik Parvatwar, Rahul Jagtap and Shailendra Kumar, 2016, “An investigation on surface quality in hybrid incremental sheet forming”, Proc. of 6th Nat. Conf. on Recent Advances in Manufacturing (12-14 May, 2016), SVNIT, Surat, pp. 131-136.
Vikas Sisodia, Rahul Jagtap, and Shailendra Kumar, 2016, “A review on experimental study of incremental sheet forming process”, 6th National Conf. on Recent Advances in Manufacturing (12-14 May, 2016), SVNIT, Surat, pp. 143-148.
Amol Patil, Rahul Jagtap and Shailendra Kumar, 2015, “An investigation on the effects of process parameters on surface roughness in single point incremental forming (SPIF) of cold rolled steel sheet DC004”, 5th National Conf. on Recent Advances in Manufacturing (15-17 May, 2016), SVNIT, Surat, pp. 113-118.
Rahul Jagtap and Shailendra Kumar, 2012, “A review on research and development in incremental sheet forming (ISF) process”, 3rd National Conf. on Recent Advances in Manufacturing (27-29 July, 2012), SVNIT, Surat, pp. 64-68.