Projects
Projects
Embedded Files
Rescue Robot
Rescue Robot
Designing and construct a robotic drone cable of locating disaster victims before first responders.
Designing and construct a robotic drone cable of locating disaster victims before first responders.
For this project I worked with a group of nine other students as a team. As a team we were able to assign tasks to different members and coordinate design choices with other members. The team was split into two groups, electrical and mechanical, in order to more effectively delegate labor. The electrical team was in charge of the motors, wiring, lights, and coding for the robot. The mechanical team was in charge of designing and building the body, top casing, drive system, and winch. The project was completed in the time allotted and functioned properly.
For this project I worked with a group of nine other students as a team. As a team we were able to assign tasks to different members and coordinate design choices with other members. The team was split into two groups, electrical and mechanical, in order to more effectively delegate labor. The electrical team was in charge of the motors, wiring, lights, and coding for the robot. The mechanical team was in charge of designing and building the body, top casing, drive system, and winch. The project was completed in the time allotted and functioned properly.
PLC Washing Machine
PLC Washing Machine
Using a PLC simulation software to design a "Washing Machine" using a batch mixer simulation.
Using a PLC simulation software to design a "Washing Machine" using a batch mixer simulation.
For this project I had to use my knowledge of PLC instructions to meet the requirements of having a batch mixer simulation display the water level in real time, have three different selectable wash settings with different timings and water levels, for the program to be able to stop and then resume during operation if the stop button is pressed, and to display if the machine is either running, idle, or full with three lights. The project was completed on time and met all requirements given.
For this project I had to use my knowledge of PLC instructions to meet the requirements of having a batch mixer simulation display the water level in real time, have three different selectable wash settings with different timings and water levels, for the program to be able to stop and then resume during operation if the stop button is pressed, and to display if the machine is either running, idle, or full with three lights. The project was completed on time and met all requirements given.
Worm Gear Reducer
Worm Gear Reducer
Using provided schematics to create a 3d assembly using CAD software.
Using provided schematics to create a 3d assembly using CAD software.
Final Assembly
Worm Gear
Worm Gear Shaft
Offset Shaft
Side Covering
Top Covering
Housing
For this project I was tasked with creating a 3D model of a worm gear reducer using schematics that were provided to me. Each individual component needed to be created as separate parts and then combined into one final assembly. The models were to be made with and assembled in Solid Works. The project was completed in the allotted amount of time and turned in with all required components.
For this project I was tasked with creating a 3D model of a worm gear reducer using schematics that were provided to me. Each individual component needed to be created as separate parts and then combined into one final assembly. The models were to be made with and assembled in Solid Works. The project was completed in the allotted amount of time and turned in with all required components.
Page updated
Google Sites
Report abuse