日本語 / English
Soft materials such as gels, rubber, and polymers behave in complex ways depending on how forces are applied and the timescale of observation. We aim to understand this behavior through molecular motion and connectivity.
Below, we introduce relatively recent papers grouped into five research themes. For the projects assigned to individual students, please see our conference presentation lists and student profile pages.
1 | Shared Fate — 一蓮托生
Networks were formed by varying the concentration, number of arms, and reaction conversion of star polymers, and their fracture under uniaxial extension was simulated. Their fracture properties can be organized in terms of the network cycle rank, but the relationship also depends on concentration. The results show that the modulus alone does not uniquely determine fracture properties.
Reproduced from Y. Masubuchi et al., Soft Matter, 2024, 20, 7103–7110 with permission from the Royal Society of Chemistry.
Article / DOI: 10.1039/D4SM00726C · TOC image source
The arm molecular weight of star polymers was varied, and the resulting end-linked networks were stretched uniaxially until they fractured. The stretch ratio at break depends on approximately the 0.67 power of the molecular weight of the network strands. This dependence cannot be explained solely by the initial strand length or nonaffine deformation; increasing concentration relative to the overlap concentration and the fraction of broken strands help explain the behavior.
Y. Masubuchi, Macromolecules 58, 6399–6405 (2025). © 2025 American Chemical Society.
Article / DOI: 10.1021/acs.macromol.5c00475 · TOC image source
Brownian dynamics simulations incorporating thermal motion were used to stretch star-polymer networks at different rates. For networks with different numbers of arms and reaction conversions, the strain and stress at break can be organized in terms of the cycle rank. Both decrease as the extension rate decreases.
Article / DOI: 10.1038/s41428-024-00992-9 · Summary source
A model incorporating slip-springs into dissipative particle dynamics was tested by systematically varying the density of entanglement constraints. When the average number of constraints per chain is matched and length, time, and modulus are rescaled, models with different constraint densities give consistent diffusion and linear relaxation moduli, in agreement with results from existing models.
Y. Masubuchi et al., Macromolecules 57, 4867–4877 (2024). © 2024 American Chemical Society.
Article / DOI: 10.1021/acs.macromol.4c00280 · TOC image source
Bending stiffness was introduced into a primitive chain network model to examine its effects on chain conformation and the relaxation modulus. With the entanglement length held constant, the plateau modulus increases in proportion to the persistence length to the two-thirds power, consistent with the increasing trend observed experimentally.
Article / DOI: 10.1678/rheology.53.119 · Summary source
Multichain slip-link simulations were used to study the two peaks in the viscosity growth of densely branched pom-pom polystyrene melts. The first peak corresponds to arm orientation and the second to backbone stretching. Cooperative molecular rotation at flow startup suppresses backbone stretching, resulting in two peaks of comparable magnitude.
Article / DOI: 10.1007/s00397-025-01502-1 · Summary source
The steady-state extensional viscosity of wormlike micellar solutions was calculated to investigate its increase with extension rate, followed by a maximum and a subsequent decrease. This nonmonotonic behavior arises from competition between micellar stretching and scission. A relation was proposed to describe unentangled systems across different temperatures, concentrations, and extension rates within a unified framework.
Y. Koide et al., Macromolecules 58, 12039–12051 (2025). © 2025 American Chemical Society.
Article / DOI: 10.1021/acs.macromol.5c01993 · TOC image source
Dissipative particle dynamics simulations of dilute polymer solutions under uniaxial extension were used to investigate the relationship between chain stretching and strain hardening. The extensional viscosity growth function was shown to be determined by the instantaneous radii of gyration parallel and perpendicular to the extension direction and their time derivatives. This approach also provides a framework for describing steady-state extensional viscosity in systems with different chain lengths and concentrations in terms of the radius of gyration.
Article / DOI: 10.1678/rheology.54.85 · Summary source
Uniaxial, planar, and biaxial extensional flows were compared to investigate why the extensional viscosity of dilute polymer solutions depends on flow kinematics. An expression based on a single-chain model separates the kinematic contribution, determined by the velocity gradient, from the contribution of changes in chain conformation. When the chains are sufficiently stretched, the radius of gyration in the extension direction governs the differences in viscosity.
Article / DOI: 10.1038/s41428-026-01216-y · Summary source
Oxidation reactions were combined with coarse-grained molecular dynamics to investigate how radical diffusivity affects degradation kinetics and spatiotemporal heterogeneity. Changing diffusivity does not qualitatively alter the degradation behavior. In heterogeneous systems, however, slower diffusion increases fluctuations in local reaction conversion and slows oxidation, while in nearly homogeneous systems it slightly enhances the initial heterogeneity.
Article / DOI: 10.1038/s41428-024-00942-5 · Summary source
The effect of oxygen concentration was incorporated through the rate of oxygen addition to investigate its influence on oxidative degradation kinetics, heterogeneity, and the extent of cross-linking. At low oxygen concentrations, conversion to peroxy radicals and hydrogen abstraction are delayed. The resulting increase in polymer radicals promotes cross-linking between radicals.
Article / DOI: 10.1016/j.polymdegradstab.2025.111404 · Summary source
Photo-aged polypropylene was stirred in water under laboratory conditions to examine changes in the size distribution of the resulting small fragments. The distribution changed from an exponential form at short stirring times to a power-law form as stirring continued, while the fragmentation rate decreased. The high crystallinity of the resulting fragments suggests a relationship between fragmentation and chemicrystallization under these controlled experimental conditions.
K. Haremaki et al., Marine Pollution Bulletin 228, 119556 (2026). Graphical abstract: author-posted version, arXiv:2503.21373v2, p. 1. The content of the figure has not been modified.
Article / DOI: 10.1016/j.marpolbul.2026.119556 · TOC image source
Methods for constructing mutually orthogonal normal modes were examined for a star-polymer model in which a central particle is connected by springs to multiple arm particles. Methods using permutations or Hadamard matrices yield simple symmetric modes for particular numbers of arms, while a method using the discrete Fourier transform matrix applies to any number of arms.
Article / DOI: 10.1678/rheology.52.255 · Summary source
Information geometry was used to show that the logarithm of relaxation time is the natural variable for representing a relaxation spectrum. Information theory then yielded the log-normal distribution as the most probable distribution. The properties of this model were compared with those of the fractional Maxwell model and with experimental linear viscoelasticity data for high-density polyethylene in both the melt and solid states.
Article / DOI: 10.1678/rheology.53.215 · Summary source
Non-Gaussian diffusion arising from heterogeneous environments was investigated for hydrogen and oxygen molecules in dry cement paste. Behavior that cannot be described by the conventional diffusion equation with a constant effective diffusion coefficient is analyzed using a two-state fluctuating diffusivity model.
Article / DOI: 10.1678/rheology.52.83 · Summary source
Rheology Physics Group (Masubuchi Laboratory)
Department of Materials Physics, Graduate School of Engineering, Nagoya University
7th Floor, EI Building, Furo-cho, Chikusa-ku, Nagoya 464-8603, Japan
Contact: Yuichi Masubuchi
Earlier Posts (Blogs)