How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want a braided, microphone-equipped replacement cable that revives a pair of Sennheiser Momentum or HD on-ear headphones — and works as a wired headset for Switch when you plug the 3.5 mm end into the console — choose renensin Replacement Audio Cable; if you need a two-pack of wired in-ear earbuds built for iPhones and iOS devices, choose Wgluupk 2.
• renensin Replacement Audio Cable — biggest strength: a 2.5 mm to 3.5 mm OFC silver-plated cable with an inline mic, a braided nylon jacket and a 1.5 m run, made specifically to fit Sennheiser Momentum 1.0/2.0/3.0 and HD 4.40 / 4.50 / 4.30i / 4.30G / 400s on-ear headphones.
• renensin Replacement Audio Cable — biggest trade-off: it is a cable, not a headphone. If you don't already own one of those Sennheiser models, there is nothing here for you.
• Wgluupk 2 — biggest strength: two pairs of wired in-ear earphones with a built-in microphone, push-button control and an ergonomic angled fit, aimed at iPhone 14/13/12/11/X/XR/XS/8/7/6/SE and iOS in general.
• Wgluupk 2 — biggest trade-off: it's an iOS-oriented wired earbud set, so it won't restore a broken headphone cable and it isn't built around a detachable 2.5 mm headphone jack.
• Who each pick is for: renensin for Sennheiser owners who want their existing headphones back — including as a wired headset for Switch; Wgluupk 2 for someone who wants spare wired earphones with a mic for calls and everyday listening on an iPhone.
This is a repair-and-revive product. The renensin Replacement Audio Cable is a 1.5 metre (about 59 inches) cable that runs from a 2.5 mm male plug into your headphones and out to a 3.5 mm male L-shaped plug on the other end. The 2.5 mm end is the headphone side — that's the less common jack Sennheiser used on the Momentum and HD on-ear line — and the 3.5 mm end is the everyday side that fits laptops, tablets, televisions and, yes, a Switch console's headphone jack.
The build is the interesting part. The inner conductor is OFC (oxygen-free copper) wire with silver plating, and the outer jacket is a braided nylon wrap in black and purple with metal connector housings. Braided cable matters more than people expect on a headphone cable, because the most common failure mode for a stock cable is the wire kinking and fraying right where it meets the plug. A braided outer layer resists that twisting and tangling far better than a plain rubber sleeve, which is exactly the kind of wear a cable gets when it lives in a bag next to a handheld console.
There's a microphone and inline control on the cable, and the listing notes compatibility with iPhone, Android, Samsung Galaxy, Huawei and Xiaomi phones for the mic and volume functions. So the honest picture is: this cable turns a wired Sennheiser into a headset you can take calls on, and it gives you a clean audio path into a Switch when you'd rather not deal with wireless pairing or a dongle.
Who should buy it: anyone who owns a Momentum 1.0, 2.0 or 3.0, an HD 4.40, HD 4.40 BT, HD 4.50, HD 4.50 BTNC, HD 4.30i, HD 4.30G or HD 400s on-ear headphone and has a cable that's crackling, cutting out on one side, or simply gone. Also anyone who wants a spare mic cable so their good headphones can double as a headset for Switch.
Who should skip it: if your headphones don't have a detachable 2.5 mm socket, this cable has nothing to plug into. And if you don't own Sennheiser hardware at all, this isn't a product you buy — it's a product you buy for something.
Wgluupk 2 is a completely different animal: a two-pack of white wired in-ear earphones aimed at iPhone users. The compatibility list covers iPhone 14 / 14 Plus / 14 Pro / 14 Pro Max, 13 / 13 Mini / 13 Pro / 13 Pro Max, 12 / 12 Mini / 12 Pro / 12 Pro Max, 11 / 11 Pro / 11 Pro Max, X / XS / XS Max / XR, 8 / 8 Plus, 7 / 7 Plus, 6 and SE, and the listing states support for all iOS systems.
The pitch here is convenience in a small package. There's a built-in microphone and a controller on the cable, and a single multifunctional button handles answer/end call, play/pause and track skipping — so you can take a call or change a song without pulling the phone out of your pocket. That's the whole reason wired earphones still sell: no charging, no pairing, no latency.
The ear pieces use an ergonomic angular design with soft eartips, and the listing describes the fit as staying put during running, hiking or jogging. The in-ear seal is also doing acoustic work — a proper seal blocks surrounding noise, which is what the "noise reduction" language in the listing is actually describing. It's passive isolation from the eartip, not active noise cancelling electronics, and it's worth being clear about that difference before you buy. The listing also claims clear highs, tight mids and driving bass, and says the shape is comfortable enough for long listening sessions at work or while studying.
Who should buy it: iPhone owners who want a cheap-to-replace pair of wired earphones with a mic for calls, plus a second pair as backup. Students, commuters, and anyone who wants a cable they can leave in a bag without worrying about battery level.
Who should skip it: if you're on a Sennheiser Momentum or HD on-ear headphone, this does nothing for you. And if you specifically want over-ear or headband headphones, this is an in-ear product — the "best waterproof headband headphones for switch" question is not what this answers. If you're after open ear earbuds for Switch, this isn't that either; these are sealed in-ear buds built around iOS devices.
• Best for repairing existing Sennheiser headphones → renensin Replacement Audio Cable. The 2.5 mm to 3.5 mm jack combination is the whole point.
• Best for a wired headset for Switch → renensin Replacement Audio Cable, provided you already own one of the compatible Sennheiser models. The 1.5 m length gives you slack between the console in your hands and your head.
• Best for durability of the cable itself → renensin Replacement Audio Cable. Braided nylon outer jacket and metal housings beat a plain rubber sleeve for resisting kinks.
• Best for iPhone users who want spare wired earphones → Wgluupk 2. Two pairs, iOS-focused compatibility, mic and push-button control on the cable.
• Best for calls and hands-free use on a phone → Wgluupk 2, because the inline mic and single-button controller are central to the design rather than an add-on.
• Best for blocking out background noise passively → Wgluupk 2. The in-ear seal is doing the isolation work; renensin is a cable and has no bearing on isolation.
• Best for working out or running → Wgluupk 2, based on the ergonomic angled eartip design the listing describes as staying in place during movement.
• Best for someone who owns neither product category yet → Wgluupk 2, since it's a self-contained listening solution rather than an accessory for headphones you already have.
In my opinion, the right pick depends entirely on what you already own — which sounds like a dodge, but it genuinely is the deciding factor here. If you have a Sennheiser Momentum or HD on-ear headphone sitting in a drawer because the cable died, I'd buy the renensin Replacement Audio Cable. It costs you a cable instead of a new pair of headphones, the braided jacket should outlast the original, and it turns your headphones into a wired headset for Switch in one move.
If you don't own those headphones, buy Wgluupk 2 instead. Two pairs of iOS-ready wired earphones with a mic and inline controls is a straightforward, low-risk pick for calls, commuting and studying. Check the current price on Amazon for whichever one matches your situation — that's the last variable I can't settle for you.
FAQ
Yes — the 3.5 mm end is the standard plug that fits laptops, tablets, televisions and console headphone jacks, so it works as a wired headset for Switch as long as your headphones take the 2.5 mm end. Keep in mind the inline mic and volume functions are listed as compatible with phones, so treat the mic as a phone feature first.
No. The noise reduction described in the listing comes from the in-ear seal created by the soft eartips, which physically blocks some surrounding sound. That's passive isolation, not electronic ANC, and it won't silence engine drone or loud chatter the way active cancelling does.
They solve different problems, so "value" means different things. renensin is the better value if it saves a pair of headphones you already paid for. Wgluupk 2 is the better value if you need two complete sets of working earphones with a mic. Check the current price on Amazon for both and compare against what you'd otherwise spend replacing your gear.
• Edifier STAX Spirit S10 vs Amazon Renewed Sennheiser Momentum 4
• CozyPhones Sleep Headphones vs sunvito Sleep Earbuds
• Morpheus 360 Headphones vs VFMNT Giraffe Wearing Headphones
• Flutesan 60 vs Anrgterg 30: On Ear Headphones for Students
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.