Lab #5

Lab# 5 - Extrusions

Create a box that is 40x100 and 15mm tall on the bottom face

Click on the top face and create a new sketch

Add text in the middle of the box with your first name

Use the point tool and add a point that is 5mm from the top and bottom edge of the top left hand corner.

Select the Rectangular Pattern tool

The rectangle pattern window will appear: fill out these parameters and click OK

Three new point will appear on your sketch - click on stop sketch

Right click on the front edge of the box and click on Press-pull

The select window will appear - click on the front edge again and it will turn into a black line

The fillet window will appear - fillet the edge by 2mm

Repeat this procedure for the remaining 3 edges

Select the Hole tool and create four holes in the four points 4mm diameter

Select all four point, to create the depth through the entire piece select the Extents to All

Select the text on the front face you know that you have selected the text as the word text will appear in the bottom right hand corner

Right click on the text and select Press-Pull

Push the text in by 2mm

Final product

Google Sites

Report abuse