International Journals

[112] Kim, S. G., Kim, I., Yu, Y., Hong, I. P., Lee, K. W., Jung, S., ... & Yook, J. G. "Design and Implementation of an X-Band 1-Bit Reconfigurable Transmitarray System with a Space-Time Coding Scheme." Journal of Electromagnetic Engineering and Science, no 3, pp. 260-270, 2025

[111] Truong, Thanh Nguyen, Anh Tuan Vo, Hee-Jun Kang, and Ic-Pyo Hong. "A Novel Model-Free Nonsingular Fixed-Time Sliding Mode Control Method for Robotic Arm Systems" Mathematics 13, no. 10: 1579. 2025

[110] Vo, Anh Tuan, Thanh Nguyen Truong, Ic-Pyo Hong, and Hee-Jun Kang. "Sliding Mode Control Method Based on a Fuzzy Logic System for ROVs with Predefined-Time Convergence and Stability" Mathematics 13, no. 10: 1573, 2025

[109] Kim, I., Noh, Y., Im, H. R., Hong, I. P., Lee, H., & Yook, J. G. "Three‐Dimensional Integral Equation‐based GSTC Method for Composite Structure With Arbitrary‐Shaped Nonpenetrating Metasurface", IET Microwaves, Antennas & Propagation, 19(1), 2025

[108]  Khoe Ta, I. -P. Hong and G. N. Tran, "SLIPT-Assisted Dual-Hop VLC/RF With Relay Selection: Outage Probability Analysis and Optimization," in IEEE Access, vol. 13, pp. 41854-41864, 2025 

[107]  T. V. Khoe and I. P. Hong, “Design and Evaluation of a Cooperative-Schedule Priority Transmission Protocol for Image Transmission in WISNs“,in IEEE Access, vol. 13, pp.1236-1248, 2025  

[106] Pham D-T, Hoang T.H.G and I. P. Hong, "RIS-Assisted CR-MEC Systems Using Deep Reinforcement Learning Approach", in IEEE Access, vol. 12, pp. 198167-198183, 2024.

[105] Tran, Ha Thi, Yun-Seok Mun, and Ic-Pyo Hong. "Drone Detection Using Dynamic-DBSCAN and Deep Learning in an Indoor Environment." Journal of Electromagnetic Engineering and Science 24.5 (2024): 510-523.

[104] I. Kim, H. -R. Im, I. -P. Hong, H. Lee and J. -G. Yook, "An Accelerated Method of a Generalized Transition Matrix Model Using Characteristic Basis Functions for Large-Scale Open-Ended Cavities," in IEEE Transactions on Antennas and Propagation, vol. 72, no. 8, pp. 6813-6818, Aug. 2024, doi: 10.1109/TAP.2024.3407382

[103] Rana B, Cho S-S, Hong I-P. “Characterization of Unit Cells of a Reconfigurable Intelligence Surface Integrated with Sensing Capability at the mmWave Frequency Band”, Electronics. 2024; 13(9):1689. https://doi.org/10.3390/electronics13091689

[102] J. -H. Kim and I. -P. Hong, “Inverse Design of Electromagnetic Metasurfaces Utilizing Infinite and Separate Latent Space Yielded by a Machine Learning-Based Generative Model”, J. Electromagn. Eng. Sci. 2024;24(2):178-190

[101] J. -H. Kim and I. -P. Hong, "An Optimization Approach based on Separated Latent Space for Inverse Design of Metasurfaces," in IEEE Antennas and Wireless Propagation Letters, doi: 10.1109/LAWP.2024.3382885

[100] Pham, The Hien, and Ic Pyo Hong. "Short‐range SAR imaging with a fast adaptive plug‐and‐play ADMM‐based approach." Electronics Letters, vol. 60, no. 3, 2024. 

[99] Hong, I.-P. Reviews Based on the Reconfigurable Intelligent Surface Technical Issues. Electronics 2023, 12, 4489.  https://doi.org/10.3390/electronics12214489

[98] Fazal, D., Umar Khan, Q. & Hong, IP. “Multiband antenna design with enhanced radiations using characteristic mode analysis”. Sci Rep 13, 17829, 2023.

[97] Fazal, D.; Hong, I.-P. A New Unit-Cell Design for a 2-Bit Reflective Metasurface for RIS Applications. Electronics 2023, 12, 4220. https://doi.org/10.3390/electronics12204220

[96] P. T. Hien and I. -P. Hong, "Millimeter Wave SAR Imaging Denoising and Classification by Combining Image-to-Image Translation With ResNet," in IEEE Access, vol. 11, pp. 70203-70215, 2023, doi: 10.1109/ACCESS.2023.3293644. 

[95] J. H. Kim and I. P. Hong, "Cross-Domain Translation Learning Method Utilizing Autoencoder Pre-Training for Super-Resolution of Radar Sparse Sensor Arrays", in IEEE Access, vol. 11, pp. 61773-61785, 2023.

[94] Rana, B.; Cho, S.-S.; Hong, I.-P. “Passive Type Reconfigurable Intelligent Surface: Measurement of Radiation Patterns,” Micromachines, 14(4), 818. 2023

[93] Biswarup Rana, Sung-Sil Cho, and Ic-Pyo Hong, Review Paper on Hardware of Reconfigurable Intelligent Surfaces, in IEEE Access, vol. 11, pp. 29614-29634, 2023.

[92] V. P. Tuan and I. P. Hong, "IRS-Aided Wireless Communication: From Physics to Channel Modeling and Characterization," in IEEE Access, vol. 11, pp. 3184-3197, 2023, doi: 10.1109/ACCESS.2023.3234762. 

[91] Pham T-H, Kim K-H, Hong I-P. “A Study on Millimeter Wave SAR Imaging for Non-Destructive Testing of Rebar in Reinforced Concrete,” Sensors, 22(20), 8030, 2022 

[90] Rana, B.; Cho, S.-S.; Hong, I.-P. “Parameters and Measurement Techniques of Reconfigurable Intelligent Surfaces,” Micromachines, 13(11), 1841. 2022

[89] P.T.Hien, V.P.Tuan and Ic-Pyo, Hong, “IRS-aided Network Scheme Supports Unmanned Aerial Vehicle Communication”, Journal of Communication and Networks, vol. 24, no. 5, pp 579-589, Oct. 2022.

[88] Y. -H. Noh, H. R. Im, W. Kim, I. -P. Hong and J. -G. Yook, "Bistatic RCS Estimation Using Monostatic Scattering Centers With Compressive Sensing," in IEEE Transactions on Antennas and Propagation, vol. 70, no. 8, pp. 7350-7355, Aug. 2022,

[87] In-Gon Lee, Jong-Yeong Kim, Ic-Pyo Hong, “Design of Multi-Functional Transmitarray with Active Linear Polarization Conversion and Beam Steering Capabilities”, Applied Sciences, no. 12(9), p4319, 2022

[86] Sung-Geon Kim, Euibum Lee, Ic-Pyo Hong, and Jong-Gwan Yook, Review of Intentional Electromagnetic Interference on UAV Sensor Modules and Experimental Study,  Sensors, vol. 22(6), 2384, 2022.

[85] Pham Duy Thanh, Hoang Thi Huong Giang, and Ic-Pyo Hong, Anti-Jamming RIS Communications Using DQN-based Algorithm, IEEE Access, vol. 10, pp. 28422-28433, Mar. 2022.

[84]  Biswarup Rana, In-Gon Lee, and Ic-Pyo Hong, A 4×4 Digitally Reconfigurable Transmitarray: Measurement of Radiation Patterns, IEICE Electronics Express, vol. 19, No.4, pp. 20210550-20210550, 2022

[83] Hyeong-Rae Im, Woobin Kim, Yeong-Hoon Noh, Ic-Pyo Hong and Jong-Gwan Yook, RCS Estimation of Singly Curved Dielectric Shell Structure with PMCHWT Method and Experimental Verification', Sensors, 22(3), 734, 2022.

[82] Sung-Sil Cho and Ic-Pyo Hong, Design of assembly-type frequency selective surface structure using Lego-type blocks, Microwave & Optical Technology Letters, vol. 64, no.2, pp. 288-293, Feb, 2022.

[81] Gyeongyeong Lee, Yeong-Hoon Noh, In-Gon Lee, Ic-Pyo Hong, Jong-Gwan Yook, Jong-Yeong Kim and Jihoon Kim, 3D printing of metasurface-based dual-linear polarization converter, Flexible and Printed Electronics, vol. 6, No. 4, 045012, 2021

[80] Van Phu Tuan and Ic-Pyo Hong, Performance Analysis of IRS-aided NOMA Communications in Presence of Imperfect SIC, Journal of Electromagnetic Engineering and Science, vol. 21, No.5, pp. 341-350, 2021.

[79] Pham The Hien and Ic-Pyo Hong,  Material thickness classification using Scattering Parameters, Dielectric Constants and Machine Learning, Applied  Sciences, 10682, 11(22), 2021

[78]  Biswarup Rana, In-Gon Lee, and Ic-Pyo Hong, Digitally Reconfigurable Transmitarray with Beam-Steering and Polarization Switching Capabilities, IEEE Access, vol. 9, pp. 144140-144148, 2021

[77] Van Phu Tuan and Ic-Pyo Hong, Enhancing Secrecy Performance for NOMA Systems With Intelligent Reflecting Surface : Analysis and Optimization, IEEE Access, vol. 9, pp. 99060-99072, 2021

[76] Sung-Sil Cho, Sung-Ho Song and Ic-Pyo Hong, Analysis of the Electromagnetic Properties of Eco-friendly Transparent Wood, Microwave & Optical Technology Letters, vol.63, No.9, pp. 2237-2241, 2021

[75]  Biswarup Rana, In-Gon Lee, and Ic-Pyo Hong, Experimental Characterization of 2×2 Electronically Reconfigurable Polarization Converter Unit-Cells at X-Band, International Journal of Antennas and Propagation,  vol. 2021, June, 2021.  

[74] Biswarup Rana, In-Gon Lee, and Ic-Pyo Hong, Experimental Characterization of 2 × 2 Electronically Reconfigurable 1 Bit Unit Cells for a Beamforming Transmitarray at X Band, Journal of Electromagnetic Engineering and Science, vol. 21, No. 2, pp. 153-160, 2021.

[73] In-Gon Lee,  Young-Joon Yoon, Kwang-Sik Choi and Ic-Pyo Hong , Design of an Optical Transparent Absorber and Defect Diagnostics  Analysis  Based on Near‐Field Measurement , Sensors, vol. 21, No. 9, 2021.

[72] Yeong-Hoon Noh, Woobin Kim, Hyun-Sung Tae, Jeong-Kyu Kim, Ic-Pyo Hong and Jong-Gwan Yook, RCS Feature Extraction Using Discretization Scatterer with Compressive Sensing, IEEE Antennas and Wireless Propagation Letters, vol. 20, no. 2, pp. 165-168, 2021.

[71] Le Thi Anh and Ic-Pyo Hong, "Secrecy Performance of a Multi-NOMA-MIMO System in the UEH Relaying Network Using the PSO Algorithm ", IEEE Access, vol. 9, pp. 2317-2331, 2021

[70] Trung Kien Nguyen and Ic-Pyo Hong, Evaluation of Common Building Wall in See-Through-Wall Application of Ultra-wideband Synthetic Aperture Radar, Journal of Electrical Engineering & Technology, vol. 16, No. 1, pp. 437-442, 2021.

[69] Woobin Kim, Hyeoung Rae Im, Yeong-Hoon Noh, Ic-Pyo Hong, Hyun-Sung Tae, Jung-Kyu Kim, Jong-Gwan Yook , Near-Field to Far-Field RCS Prediction on Arbitrary Scanning Surfaces Based on Spherical Wave Expansion, Sensors, vol. 20, No. 24, 2020.

[68] In-Gon Lee, Won-Seok Oh, Yoon-Jae Kim and Ic-Pyo Hong, "Design and Fabrication of Absorptive/Transmissive Radome Based on Lumped Elements Composed of Hybrid Composite Materials", IEEE Access, vol. 8, pp. 129576-129585, 2020

[67] Van Phu Tuan and Ic-Pyo Hong, "Secrecy Performance Analysis and Optimization of Intelligent Reflecting Surface-aided Indoor Wireless Communications ", IEEE Access, vol. 8, pp. 10940-10952, 2020

[66] Chan-Sun Park, Yoon-Jae Kim, Ic-Pyo Hong, and Jong-Gwan Yook, “Acceleration of Multilevel Characteristics Basis Function Method by Multilevel Multipole Approach,”, IEEE Trans. on Antennas and Propagation, Vol. 68, No. 10, pp. 7109-7120, Oct. 2020. 

[65] Van Phu Tuan and Ic-Pyo Hong, Secure Communication in Cooperative SWIPT NOMA Systems with Non-Linear Energy Harvesting and Friendly Jamming, Sensors, Vol. 20, Iss 4, 2020.

[64] Trung Kien Nguyen and Ic-Pyo Hong, Application of Metaheuristic Optimization Algorithm and 3D Printing Technique in 3D Bandpass Frequency Selective Structure, Journal of Electrical Engineering & Technology, Feb. 2020.

[63] In-Gon Lee, Won-Seok Oh, Yoon-Jae Kim and Ic-Pyo Hong, Chipless frequency selective rasorber with stable performance for oblique incidence, Electronics Letters, Vol.55, 2019.

[62] In-Gon Lee, Yoon-Jae Kim and Ic-Pyo Hong, Practical absorptive frequency selective surface based on printed electronics technology for radome applications, Microwave & Optical Technology Letters, Vol.61, No.12, pp. 2709-2719, Dec. 2019.

[61] H.J.Kim, S.S.Cho, O.B.Kwon, Y.J.Kim and I.P.Hong, Paper-based uniplanar ultra-wideband frequency-selective surface design, Electronics Letters, Vol. 55, No.9, pp.506-508, May. 2019.

[60] Trung Kien Nguyen, In-Gon Lee, Obum Kwon, Yoon-Jae Kim, Ic-Pyo Hong, Metaheuristic Optimization Techniques for an Electromagnetic Multilayer Radome Design, Journal of Electromagnetic Engineering and Science, vol. 19, No. 1, pp.31-36, Jan. 2019.

[59] Sangsu Lee, Heejae Jun, Kyungyoung Jung, Hosung Choo, Icpyo Hong, YongBae Park, Dual Band RCS Reduction Using Modulated Grooves in A Conducting Plane, Journal of Electrical Engineering & Technology, Vol. 13, No. 1, Jan. 2019.

[58] Dong-Chan Son, Hokeun Shin, Yoon-Jae Kim, Ic-Pyo Hong, Heoung-Jae Chun, Hosung Choo, Yong-Bae Park, “Design of a Multi‑Layered Reconfigurable Frequency Selective Surface Using Water Channels,”Journal of Electrical Engineering & Technology, Vol. 13, No. 1, Jan. 2019.

[57] Dong-Chan Son, Hokeun Shin, Yoon-Jae Kim, Ic-Pyo Hong, Heoung-Jae Chun, Kyung-Young Jung, Hosung Choo, Yong-Bae Park,“Design of a Hemispherical Reconfigurable Frequency Selective Surface Using Water Channels”, IEEE Access, Vol. 6, No.1, pp. 61445-61451, Dec. 2018.

[56] Sung-Sil Cho, Sun-Hong Yoon, and Ic-Pyo Hong, “Design of Three-Dimensional Frequency Selective Structure With Replaceable Unit Structures Using a 3-D Printing Technique”, IEEE Antennas and Wireless Propagation Letters, Vol. 17, No. 11, pp. 2041-2045, Nov. 2018.

[55] Yi-Ru Jeong, Ic-Pyo Hong, Jong-Gwan Yook,“Application of a CMP to an EFIE-TDS surface integral equation”, IET Microwaves, Antennas & Propagation, Vol. 12, No. 13, pp.2046-2052, Oct. 2018.

[54] Chan-Sun Park, Yi-Ru Jeong, Ic-Pyo Hong, and Jong-Gwan Yook, “Block Size Optimization of CBFM for Scattering Problems”, IEEE Trans. on Antennas and Propagation, Vol. 66, No. 10, pp. 5370-5377, Oct. 2018.

[53] J. Kim, M. Jeong, I. Hong, S. Rhee, I. Cho and N. Kim “A hybrid shielding structure for reduction of the leakage magnetic field in wireless power transfer system”, Microwave & Optical Technology Letters, Vol.60, No.10, pp.2547-2551, Sept. 2018.

[52] In-Gon Lee, Nam Kim, In-Kui Cho and Ic-Pyo Hong,“Design of a Mu-Near-Zero Metamaterial for Reducing the Backward Magnetic Flux Leakage of a Wireless Power Transfer System”, IEICE Electronics Express, Vol.15, No.15, 1-11, 2018.

[51] Sang-Hwa Lee, Min-Sik Kim, Jong-Kyu Kim, Jongin Lim, and Ic-Pyo Hong, “Security Paper Design with Frequency-Selective Structure for X-band Electromagnetic Detection system”, International Journal of antenna & propagation, Vol. 2018, Aug. 2018.

[50] Sang-Hwa Lee, Min-Sik Kim, Jong-Kyu Kim, Ic-Pyo Hong, “Design of Security Paper with Selective Frequency Reflection Characteristics”, Sensors, Vol. 18, No. 7, pp. 2263, Jul. 2018.

[49] Dong Chan Son, Hokeun Lee, Yoon Jae Kim, Ic Pyo Hong, Heoung Jae Chun and Yong Bae Park, “Design and Fabrication of a Reconfigurable Frequency Selective Surface Using Fluidic Channels”, Journal of Electrical Engineering & Technology, Vol. 12, No. 6, pp. 2342-2347, Nov. 2017.

[48] In-Gon Lee, Yong-Bae Park, Heung-Jae Chun, Yoon-Jae Kim and Ic-Pyo Hong,“Design of Active Frequency Selective Surface with Curved Composite Structures and Tunable Frequency Response”, International Journal of antenna & propagation, Vol. 2017, Nov. 2017.

[47] Yun-Seok Seo, Heoung-Jae Chun, Ic-Pyo Hong, Young-Bae Park, Yoon-Jae Kim, “Fabrication of Hybrid Composite Plates with an Active Frequency Selective Surface”, Composites Research, Vol. 30, No. 5, pp.273-279, Oct. 2017.

[46] Sung-Sil Cho, Jae-Sung Yoo, Jin-Man Kim and Ic-Pyo Hong, “Prediction of Electromagnetic Transmission Properties Using Dielectric Property Modeling of Foamed Concrete Containing BFS”, Construction & Building Materials, Vol. 151, pp. 650-660, Oct. 2017.

[45] In-Gon Lee, Nam Kim, In-Kui Cho and Ic-Pyo Hong,“Design of a Patterned Soft Magnetic Structure to Reduce Magnetic Flux Leakage of Magnetic Induction Wireless Power Transfer Systems”, IEEE Trans. on Electromagnetic Compatibility, Vol. 59, pp. 1856-1863, Dec. 2017

[44] Sung-Sil Cho and Ic-Pyo Hong, “Reduction of Wireless Signals in Indoor Environments using an Active Frequency Selective Wall Based on Spectrum Sensing”, International Journal of Communication Systems, Vol. 30, Dec. 2017

[43] Sung-Sil Cho, Jin-Man Kim and Ic-Pyo Hong, "Electromagnetic Shielding Characteristics of Eco-Friendly Foamed Concrete Wall', International Journal of antenna & propagation, Vol. 2017, Apr. 2017.

[42] In-Gon Lee and Ic-Pyo Hong, "Scalable Frequency Selective Surface with Stable Angles of Incidence on a Thin Flexible Substrate,', International Journal of antenna & propagation, Vol. 2016, Sep. 2016.

[41] Sung-Sil Cho and Ic-Pyo Hong,“Design of a paper-based reconfigurable frequency selective surface structure”, IEICE Electron. Express, Vol.13, No.16, pp.1-7, Aug. 2016.

[40] In-Gon Lee, Yoon-Jae Kim, Yong-Bae Park, Heung-Jae Chun, and Ic-Pyo Hong,“Design of X-band reconfigurable frequency selective surface with high isolation”, IEICE Electron. Express, Vol.13, No.16, pp.1-8, Aug. 2016.

[39] S.Y. Hyun, I. Jung, I.P.Hong, C.Jung, E.J. Kim and J.G.Yook, "Modified Sheet Inductance of Wire Mesh Using Effective Wire Spacing", IEEE Trans. on Electromagnetic Compatibility, Vol. 58, No. 3, pp. 911-914, June. 2016.

[38] Yi-Ru Jeong, Ic-Pyo Hong, Kyung-Won Lee, Jong-Hyun Lee, and Jong-Gwan Yook, “Fast frequency –sweep using asymptotic waveform evaluation technique and thin dielectric sheet approximation”, IEEE Trans. on Antennas and Propagation, Vol. 64, No.5, pp. 1800-1806, May. 2016.

[37] I. G. Lee, S. H. Yoon, J. S. Lee and I. P. Hong, “Design of Wideband Radar Absorbing Material with Improved Optical Transmittance by Using Printed Metal-Mesh,” Electronics Letters, Vol. 52, no. 7, pp. 555-557, Apr. 2016.

[36] Yi-Ru Jeong, Ic-Pyo Hong, Heoung-Jae Chun, Yong Bae Park, Youn-Jae Kim and Jong-GwanYook, “Fast Scattering Analysis over a wide frequency band using Clenshaw-Lord type Pade-Chebyshev approximation”, IET Microwaves Antennas & Propagation, Vol. 10, pp. 245-250, Feb. 2016.

[35] In-Han Hwang, Heoung-Jae Chun, Ik-Pyo Hong, Yong-Bae Park, Yoon-Jae Kim, “Change of transmission characteristics of FSSs in hybrid composites due to residual stresses”, Steel and Composite Structures, Vol. 19, No. 6, pp. 1501-1510, Dec, 2015.

[34] In-Gon Lee, Ic-Pyo, Hong, “Design of a Flexible and Reconfigurable Frequency Selective Surface”, International Journal of Circuits, Systems and Signal Processing, Vol. 9, pp. 296-299, Sep. 2015.

[33] Ic-Pyo Hong, “Transparent Electromagnetic Absorber for Stable Angle of Incidence”, Microwave & Optical Technology Letters, Vol.57, No.9, pp.2023-2025, Sep. 2015.

[32] Ic-Pyo, Hong, “Paper-based frequency selective surface for stable angle of incidence”, IEICE Electron. Express, Vol.12, No.7, pp.1-6, Apr. 2015.

[31] Kyung-Mi Park, Yun-Seok Seo, Heoung-Jae Chun, Ik-Pyo Hong, Yong Bae Park and Yoon-Jae Kim, "Residual stress and electromagnetic characteristics in loop type frequency selective surface embedded hybrid structures", Journal of Mechanical Science and Technology, Vol. 29, No.1, pp.99-102, Jan. 2015.

[30] Yi-Ru Jeong, Ic-Pyo Hong, Heoung-Jae Chun, Yong Bae Park, Youn-Jae Kim and Jong-GwanYook, “Scattering analysis of curved FSS using Floquet harmonics and asymptotic waveform evaluation technique”, Steel and Composite Structures, Vol. 17, No. 5, pp. 561-572, Nov, 2014.

[29] Ic-Pyo Hong, “Investigation of the Finite Planar Frequency Selective Surface with Defect Patterns", Journal of Electrical Engineering & Technology, Vol. 9, No. 4, pp. 1360-1364, Jun. 2014.

[28] Ji-Hyung Kim, Heoung-Jae Chun, Ic-Pyo Hong, Yoon-Jae Kim, and Yong-Bae Park, “Analysis of FSS Radomes Based on Physical Optics Method and Ray Tracing Technique”, IEEE Antennas and Wireless Propagation Letters, Vol. 13, pp. 868-871, 2014.

[27] In-Gon Lee, Ic-Pyo Hong, “3D Frequency Selective Surface for stable angle of incidence”, Electronics Letters, Vol. 50, No. 6, pp. 423-424, Mar. 2014.

[26] In-Gon Lee, Ic-Pyo Hong, “Design of Window Applicable Blind-type Frequency Selective Surface”, Journal of Electrical Engineering & Technology, Vol. 9, No. 2, pp. 682-685, Mar. 2014.

[25] Yi-Ru Jeong, Ic-Pyo Hong, Heoung-Jae Chun, Jong-Gwan Yook, “Transmission characteristics of a composite made with ground granulated blast furnace slag”, IEICE Electron. Express, Vol.11, No.2, pp.1-7, Jan. 2014.

[24] Ic-Pyo Hong, “Propagation path loss characteristics of vertical dipole above perfect ground”, IEICE Electron. Express, Vol.10, No.21, pp.1-8, Nov. 2013.

[23] Ic-Pyo Hong and In-Gon Lee, “Design of a Film Antenna Using a Cloverleaf-Shaped Monopole Structure for WiBro and WLAN”, IEICE Electron. Express, Vol.9, No.7, pp.654-659, Apr. 2012.

[22] Ic-Pyo Hong, Young-Jin Jung and Soon-Young Eom “Design of a Vertically Stacked Reconfigurable Dipole Antenna for a Base Station, Microwave & Optical Technology Letters, pp.964-967, Vol. 54, No. 3, Mar. 2012.

[21] Soon-Young Eom, Seong-Keun Kim, Ic-Pyo Hong and Jong-Gwan Yook, “High-gain multilayered disk array structure excited by stacked microstrip patches, Microwave & Optical Technology Letters, pp.768-770, Vol. 54, No. 2, Feb. 2012.

[20] Kyung-Won Lee, Yi-Ru Jeong, Ic-Pyo Hong, Myung-Gun Lee, Heoung-Jae Chun and Jong-Gwan Yook, “Simple design method of FSS radome analysis using equivalent circuit model”, IEICE Electron. Express, Vol. 8, No. 23, pp.2002-2009, Dec. 2011.

[19] S.Y.Eom, I.P.Hong and J.M.Kim, "Broadband Printed Cross-Dipole Element with Four Polarization Reconfigurations for Mobile Base Station Array Antenna Applications,', International Journal of antenna & propagation, Vol. 2011, Jul. 2011.

[18] K.W.Lee, I.P.Hong, Y.C.Chung, and J.G.Yook, "Studies on a Fiber-Reinforced Ceramic Composite Layer for On-Board Antenna Protection', IEICE Transactions on Electronics, Vol.E94-C, No.6, pp1135-1137. Jun. 2011.

[17] Y.C.Chung, K.W.Lee, I.P.Hong, M.G.Lee, H.J.Chun and J.G.Yook, "Simple prediction of FSS radome transmission characteristics using an FSS equivalent circuit model', IEICE Electronics Express, Vol.8, No.2, pp89-95. Jan. 2011.

[16] S.Y.Eom and I.P.Hong, "A Novel Band Rejection Filter of Transmission Line Type Using Double Spur-Lines", Microwave & Optical Technology Letters, pp.1880-1883, Vol. 52, No. 8, Aug. 2010.

[15] Y.C.Chung, K.W.Lee, I.P.Hong, K.H.Oh and J.K.Yook, "A New CCM Material with Improved Shielding Effectiveness for X-band Applications", IEICE Tran. on Electronics, pp.929-931, Vol.E93-C, No.6, Jun. 2010.

[14] J.H.Jung, I.P.Hong and R.Nevels, "The Time Domain Propagator Method for Lossless Multiconductor Quasi-TEM Lines", IEEE Trans. on Advanced Packaging, pp.619-626, Vol. 32, No. 3, Aug. 2009.

[13] I.P.Hong, N.I.Yun and J.K.Yook, "Design of Tight Coupled Backward-wave Directional Coupler Using Coupled Lines with Dielectric Guide and Finite Metallization Thickness", IEE Proceeding - Microwave, Antenna, Propagation, pp.283-286, Vol. 151, No. 4, Sep. 2004.

[12] I.P,Hong and S.K.Park, "Design of Novel Parallel-Coupled Band-Pass Filter With Dielectric Guide in Coupled Sections", IEICE Tran. on Electronics, pp.423-424, Vol. E87-C, No. 3, Mar. 2004.

[11] I.P,Hong and S.K.Park, "Implementation of Coupling Improvement in Coupled Lines With the Different Metallization Thickness", Microwave & Optical Technology Letters, Vol. 39, No. 5, pp.426-428, Dec. 2003.

[10] N.I.Yun, I.P.Hong and H.K.Park, "Investigation of Asymmetrical Coupled Microstrip Lines with Finite Metalization Thickness", Microwave & Optical Technology Letters, Vol. 28, No. 1, pp. 45-47, Jan. 2001.

[9] I.P.Hong and H.K.Park, "Quasi-static Analysis of Traveling-Wave Electrodes with Asymmetrical Finite Thickness for Electro-Optic Modulators", IEE Proceeding - Optoelectronics, vol. 147, No. 2, pp 120-122, Apr, 2000.

[8] I.P.Hong and H.K.Park, "Design of Parallel-Coupled Band-pass Filter with the Asymmetrical Metallization Thickness", Electronic Letter, Vol. 35, No. 20, pp 1751-1752, Sep, 1999.

[7] I.P.Hong, S.K.Park and H.K.Park, "Quasi-static Analysis of the Coupled Microstrip Lines with Asymmetrical Finite Metallization Thickness on Anisotropic Substrate", IEEE Trans. on Microwave Theory & Tech., Vol. 47, No. 9, pp 1739-1742, Sep, 1999.

[6] I.P.Hong, S.K.Park and H.K.Park, "Quasi-static Analysis of Coupled Coplanar Waveguide Traveling-Wave Electrodes for Electro-Optic Modulators", Microwave & Optical Technology Letter, Vol. 20, No. 2, pp 284-286, Feb, 1999.

[5] I.P.Hong, S.K.Park and H.K.Park, "Analysis on the Effect of Metal Penetrating Depth into the Anisotropic Substrate in Shielded Microstrip Line", International Journal of RF and Microwave Computer-Aided Engineering, Vol. 9, No. 1, pp 49-53, Jan, 1999.

[4] I.P.Hong, N.I.Yoon, S.K.Park and H.K.Park, "Investigation of Metal Penetrating Depth in Shielded Microstrip Line", Microwave & Optical Technology Letter, Vol. 19, No. 6, pp 396-398, Dec, 1998.

[3] J.W.Lee, I.P.Hong, T.H.Yoo and H.K.Park, "Quasi-static Analysis of Conductor-Backed Coupled Coplanar Waveguide", Electronic Letter, Vol. 34, No. 19, pp 1861-1862, Sep, 1998.

[2] I.P.Hong, Y.K.Lee and H.K.Park, "Dispersion Characteristics of a Broadside-Coupled Coplanar Wavegude", Electronic Letter, Vol. 33, No. 11, pp 965-966, May, 1997.

[1] I.P.Hong, and H.K.Park, "Dispersion Characteristics of a Unilateral Fin-Line using 2D-FDTD", Electronic Letter, Vol. 32, No. 21, pp 1992-1994, Oct, 1996.