Vehicles

Losi XXX-S Sport roller - foam bumper is a bit chewed up, but otherwise in decent shape for its age - bag of parts included

Tamiya TL01 1/10 4WD F150 SVT Lightning - Tamiya brushed ESC and silver can motor included - servo included but not installed - includes original manual and a few extra bits and pieces from the kit - does not appear to have ever been run

HPI RS4 Sport 1/10 4WD chassis - needs new belts and some steering linkage work

HPI E10 "drift" roller - new chassis tub, upgraded aluminum center shaft and motor mount (included but not installed) - includes original hard plastic drift wheels and normal rubber wheels

Tamiya TA04-SS 1/10 4WD - Bulletstorm brushless sensored ESC and sensored motor - original manual and some spared included

Tamiya M01 mini 1/10 RWD - novatech brushless ESC, sensorless brushless motor, and EXI servo included - nearly enough spares to build another full chassis - 210mm body (forget make/model) is cut/painted, but protective film still in place -

Sprint 1/43 RWD micro cars - one buggy, one hatchback - proportional steering - radios and USB chargers included

Venom Creeper 1/10 MoA crawler roller - aluminum beadlock wheels up front, plastic beadlocks in back - proline hammer tires in good shape - proline jeep rubicon body is a little rough, but still serviceable

Duratrax Nitro Quake 1/8 RWD baja bug brushless conversion roller - center dif locked, front drivetrain removed, and electric motor mount installed - new proline 1/8 VW beetle body - rear 1/8 monster truck tires/wheels brand new - parts chassis included - battery/ESC tray included, but not pictured - just need to add electronics, rig up some body posts, and you're good to go - $150

Tamiya FF-01 FWD 1/10 car with HK 45A brushless ESC and Forward Pro 11.5t brushless motor - new proline Celica body with all stickers - a bunch of spares included -

Tamiya TT-01 1/10 4WD chassis with new exceed 350Z body, a servo, and a bunch of extra parts

Associated RC10B44 4WD 1/10 buggy. New T-bone bumpers front and back. Tacon 3200KV motor and Brushless Hobbies 80A ESC (USB programming tool included). Saddle pack lipos included but in unknown condition. Car is in very good overall condition. Used dish wheels with new tires and some spare parts included - $225

Redcat Sandstorm 4WD 1/10 baja buggy - only driven twice - includes battery (probably dead) and radio

Ofna Pirate 1/10 4WD roller - Spares, leftover nitro bits, and electric conversion motor mount included

Associated MGT shelf queen roller - upgrade FT chassis, aluminum A-arms, towers, shocks, etc. Totally impractical but very bling. The body is a bit dusty and has stupid stickers on it, but otherwise in great shape. Some extra parts included -

Traxxas E-Maxx roller - includes steering and shifter servo but no other electronics

Traxxas T-Maxx roller - a bit grungy and in rough shape -

DIY quadcopter - built but never flown. I honestly don't remember the exact specs of the parts.

Takara Tomy GX buggy 1/32 scale - original Japanese version with original box - probably collectible, but then what isn't if it's what you're into

Sakura FF 1/10 FWD carbon fiber chassis - lightly used -

Turnigy 1/16 brushless Mini Rally Extreme - they call it a 1/16, but the body is about the size of a 1/12 road car - run maybe twice

Active Hobby JL12e 1/10 mini (210mm wheelbase) 4WD (belt) ARR with Skoda Fabia rally body - stock brushed electronics - never run

Losi Highroller roller - complete minus electronics, but could use new body posts -

Ofna Hyper8 1/8 4WD buggy - brushless conversion with turnigy 160A esc, turnigy motor (forget the KV), and solar high torque servo. Needs a pinion, some motor screws, and a body, but otherwise ready to go. Good condition overall

Ofna Ravager 1/8 brushless rally conversion - 1400kv brushless motor & hobbyking 100A ESC - crashed by a friend of mine, trashing the front tower, shocks, and putting some ugly creases in the difficult-to-replace rallygame body

Losi LST2 1/8 nitro monster truck roller - new (uncut, unpainted) body and a bunch of spares - clean and in good shape overall

Losi mini LST2 1/18 - brushless conversion with HK 25A ESC, carbon fiber deck, exotek single-servo mount, t-bone bumpers, and a brand new body sprayed metallic purple - 2 extra sets of wheels/tires and some misc spares - There may be an issue with the servo, (maybe just linkage adjustments?) I don't fully remember -