How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-26 · 8 min read · Independent comparison
• Razer BlackShark V2 — biggest strength: over-ear comfort with cooling gel-infused memory foam cushions, 50 mm Triforce titanium drivers split into three tuning zones, and software-enabled 7.1 surround for positional audio on Windows 10 64-bit.
• Razer BlackShark V2 — biggest trade-off: it's a wired, Windows-centric headset, and the surround feature simply isn't available outside Windows 10 64-bit. It also relies on a software layer rather than passive isolation for immersion.
• keephifi CCA Xyrra USB-C — biggest strength: genuine in-ear sound isolation plus a hybrid 1DD+1BA driver setup tuned so mid-to-high frequencies stay separated from ambient noise — the practical way to hear footsteps in a noisy room.
• keephifi CCA Xyrra USB-C — biggest trade-off: it's an in-ear monitor, not a headset with a boom mic, and it's explicitly not water resistant, so sweat-heavy sessions need care. The tiny 6-gram buds also mean tip fit matters more than with over-ears.
• Razer BlackShark V2 is for you if you game at a desk, want a full-size headset plus a stand, and your rig runs Windows 10 64-bit.
• keephifi CCA Xyrra USB-C is for you if you play on a handheld, console or USB-C phone and want noise isolating earbuds you can carry anywhere.
The BlackShark V2 in this bundle is a classic over-ear gaming headset paired with a Base Station V2 Chroma. The audio story starts with 50 mm dynamic drivers built as Razer's Triforce Titanium design — the driver is divided into three parts so highs, mids and lows can each be tuned separately instead of sharing one compromise curve. In practice that's the kind of tuning that keeps explosions from swallowing dialogue and keeps footsteps audible under gunfire. On top of that, the headset supports software-enabled 7.1 surround sound for positional audio, with the important caveat that it only works on Windows 10 64-bit. If you're on macOS, Linux or a console, plan on stereo.
Comfort is where this headset earns its keep for long sessions. The ear cushions are oval, filled with cooling gel-infused memory foam, which is specifically aimed at preventing the heat and pressure build-up that makes over-ears unpleasant after a couple of hours. The bundle's Base Station V2 Chroma adds a docking stand with a non-slip rubber base and a low center of gravity so the headset sits securely, plus Chroma lighting that syncs with supported games, other Razer hardware, Philips Hue and gear from a long list of partners. The base can also be separated from the stand for transport, which is a small but genuinely useful detail.
Who should buy it: desktop players who want one wired headset for everything — game audio, voice chat via the built-in mic, and a tidy place to park it between matches. It suits people who like a visible, customizable setup and who run Windows.
Who should skip it: handheld and console players, anyone who wants isolation from passive earbud fit rather than software surround, and anyone on an OS where the 7.1 feature won't activate. If you need to hear traffic or a doorbell while gaming, an over-ear headset that doesn't clamp tightly is actually the friendlier choice.
This is a completely different tool. The Xyrra is an in-ear monitor with a hybrid driver array: a 10 mm metal composite dynamic driver handles the low end, backed by a high-molecular damping layer that absorbs excess resonance for tighter, more layered bass. A separate 30118 balanced armature sits angled toward the nozzle and reproduces frequencies above 1.2 kHz, which is the region where footsteps, reloads, weapon switches and other competitive cues live. That division of labor is why the tuning can keep voices full in the midrange while treble stays crisp — and why the mid-to-high tuning is deliberately set up to separate game audio from ambient noise.
That last point is the whole reason this comparison exists. The Xyrra's noise control is listed as sound isolation — the passive kind that comes from a sealed in-ear fit, not active noise cancellation. Deep-insertion silicone tips block a meaningful amount of room noise on their own, which means you don't need a battery, an app or a Windows-only driver to get a quieter listening environment. It's the simplest form of noise isolation there is, and for a noisy household it's often more useful than a big over-ear that lets everything through.
Around the buds themselves: each one weighs about 6 grams, made from skin-friendly anti-allergy resin with a mirror-finish waved cover formed by high-pressure injection molding. Impedance is 27 ohm, sensitivity 110 dB, and the frequency response reaches 40 kHz. The cable is detachable, using QDC connectors and dual parallel OFC wiring to cut electromagnetic interference, and you get both 3.5 mm and Type-C options so the same buds work on a phone, tablet, laptop, Steam Deck, ROG Ally or Switch. The model in this configuration is the TypeC Mic version, and there's a one-year warranty. A few honest limits: the buds are not water resistant, and there's no boom mic — the mic is on the cable, which is fine for calls and casual chat but not a broadcast setup.
Who should buy it: handheld and mobile gamers, commuters, students, and anyone who wants one small pair of earbuds for gaming, music and travel. The tuning is described as bright and punchy for rock, electronic and synth-heavy tracks while still handling classical, folk, vocals and pop.
Side-by-Side: Which Should You Choose?
• Best for passive noise isolation → keephifi CCA Xyrra USB-C. Its listed noise control is sound isolation from a sealed in-ear fit, so it works with no software and no power.
• Best for positional audio on a desktop → Razer BlackShark V2. Software-enabled 7.1 surround with 50 mm Triforce Titanium drivers, Windows 10 64-bit only.
• Best for long-session comfort on a big head → Razer BlackShark V2. Cooling gel-infused memory foam cushions designed to avoid heat and pressure build-up.
• Best for handheld and console gaming → keephifi CCA Xyrra USB-C. Plug-and-play with both 3.5 mm and Type-C detachable cables.
• Best for portability → keephifi CCA Xyrra USB-C. Two 6-gram buds and a thin OFC cable versus a full headset plus a Chroma stand.
• Best for a tidy desk setup → Razer BlackShark V2. The bundle includes the Base Station V2 Chroma with a non-slip rubber base and low center of gravity, plus lighting that syncs with supported games and gear.
• Best for competitive cue-tracking in a loud room → keephifi CCA Xyrra USB-C. The balanced armature targets frequencies above 1.2 kHz — footsteps and weapon switches — and the tuning pushes ambient noise back.
• Best for voice chat with a headset mic → Razer BlackShark V2. It's built as a headset; the Xyrra's mic is a cable-mounted inline type.
If I had to pick one, I'd buy the keephifi CCA Xyrra USB-C — and the reason is the noise isolating angle you came here for. Passive isolation from a proper in-ear seal does something no software surround mode can: it lowers the noise floor around you, so the cues your game is already playing become easier to hear. Add the hybrid 1DD+1BA tuning, the 6-gram resin shells, and the fact that the same buds work on a Steam Deck, a Switch and a USB-C phone, and it's the more versatile tool for most people in 2026.
That said, I'd recommend the Razer BlackShark V2 without hesitation to a desk-bound Windows player who wants a full-size headset, a built-in mic and a Chroma stand in one box. Different rooms, different jobs. Check the current price on Amazon before deciding, since value is the one thing specs can't tell you.
what is noise isolation headphones
Noise isolation means blocking outside sound passively, through a physical seal rather than electronics. The keephifi CCA Xyrra USB-C is listed with sound isolation as its noise control method, achieved by the silicone tips sealing your ear canal and reducing ambient noise — no battery or app required.
are noise cancelling headphones good for gaming
That depends on the type. Active noise cancellation cuts steady droning sounds, but pure isolation like the Xyrra's can also help by lowering the room noise floor so quiet in-game cues stand out. The Xyrra leans on isolation plus mid-to-high tuning aimed at footsteps and weapon switches, which is the part that matters competitively.
are there noise cancelling gaming headphones
Yes, and they come in two flavors. Over-ear headsets like the Razer BlackShark V2 focus on immersion through drivers and software surround rather than blocking sound, while in-ear models like the keephifi CCA Xyrra USB-C use a sealed fit and sound isolation to keep ambient noise out.
what are the best noise cancelling gaming headphones
In my opinion, the better question is isolation versus immersion. If you want to shut out a noisy room, I'd point to the keephifi CCA Xyrra USB-C for its sealed in-ear isolation and balanced armature tuned above 1.2 kHz. If you want a big over-ear with 7.1 surround on Windows, I'd point to the Razer BlackShark V2.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: SoloWIT Earpads vs Gemini Studio Headphones, MIDOLA Kids vs iKF R1, PROAR USB Condenser Microphone vs Corsair Virtuoso PRO, EKSA Gaming Headset vs MCHOSE X9