At the nexus of microelectronics, nanoelectronics, and biosensing technologies, with an emphasis on advancing both fundamental knowledge and practical applications
At the nexus of microelectronics, nanoelectronics, and biosensing technologies, with an emphasis on advancing both fundamental knowledge and practical applications
Initial investigations focused on the characterization of interface charges and traps in ultra-thin high-k dielectric metal–oxide–semiconductor (MOS) and fin field-effect transistor (FinFET) devices, utilizing the capacitance-voltage (C-V) and conductance-voltage (G-V) techniques to optimize the gate dielectric-semiconductor interfaces. The research was primarily centered on the analysis and optimization of MOS structures incorporating ultra-thin high-k dielectrics such as hafnium(IV) oxide (HfO₂), aluminum oxide (Al₂O₃), and zirconium dioxide (ZrO₂).
Special emphasis was placed on understanding dielectric behavior in aggressively scaled devices, where interface quality critically impacts threshold voltage stability, subthreshold swing, and gate leakage. By characterizing and engineering these dielectric interfaces, the work contributes to the development of more reliable, power-efficient, and scalable MOS technologies suitable for advanced complementary metal-oxide-semiconductor (CMOS) nodes. This foundational work enabled significant improvements in device performance, reliability, and scalability, which are critical for the development of next-generation nanoelectronic circuits.
Building upon these findings contributed to the advancements in carrier transport and interface engineering within sophisticated multi-gate and gate-all-around FinFET architectures, including the innovative Quantum (Q)-FinFET design. This research explores advanced FinFET and Q-FinFET architectures with a focus on interface engineering, carrier transport, and quantum effects at nanoscale dimensions.
By optimizing the steep retrograded doping profiles and evaluating dielectric behavior under varying geometries, the studies contribute to enhanced electrostatic control, reduced leakage, and improved device reliability. The research addresses pivotal challenges related to carrier scattering and quantum confinement at the nanoscale, facilitating breakthroughs in low-power, high-speed logic and system-on-chip (SoC) technologies.
The Q-FinFET, a novel structure introduced in this work, demonstrates superior electrostatic control and scalability for sub-5 nm logic nodes. Explorations highlight improvements in drive current, leakage suppression, and reliability—establishing Q-FinFETs as promising candidates for ultra-low power, high-speed SoC applications in next-generation nanoelectronics.
Extending beyond silicon-based architectures, the research advances into Gallium Nitride (GaN) Nanowire Field-Effect Transistors (FETs), leveraging wide-bandgap properties to meet the demands of extreme scaling, high-speed logic, and multifunctional sensing applications. Research focuses on exploring Gate-All-Around (GAA) and Direct-Coupled FET Logic (DCFL) architectures to investigate their potential for ultra-scaled, high-performance, and low-power electronic devices. Further, comparative analysis with silicon (Si) and zinc oxide (ZnO) nanowires demonstrates GaN’s superior electrostatic control, especially when combined with high-k dielectrics, enabling enhanced device performance at aggressively scaled nodes.
In addition to digital logic, GaN nanowire FETs are being adapted for chemical and biomedical sensing, leveraging their high surface-to-volume ratio and carrier mobility. These devices exhibit high sensitivity and low detection limits for disease biomarkers and various other analytes, making them suitable for next-generation biosensors. Additionally, investigations into GaN and ZnO nanowire FETs explore device scalability beyond the 5 nm technology node, highlighting their potential for ultra-low-power logic applications and novel chemical and biomedical sensing. This work bridges nanoelectronics with emerging biomedical technologies.
Complementing work in device physics, lead cutting-edge investigations on GaN-based high electron mobility transistors (HEMTs) for power electronics and highly sensitive biosensors. Notably, a major thrust in biosensing led to the first demonstration of a GaN HEMT biosensor-based standalone handheld system for early, label-free, and noninvasive detection of United States Food and Drug Administration (US-FDA)-approved brain injury biomarkers ubiquitin C-terminal hydrolase L1 (UCH-L1) & glial fibrillary acidic protein (GFAP) and Alzheimer’s disease biomarker amyloid-beta (Aβ), alongside rapid detection of Scandinavian Neurotrauma Committee (SNC)-recommended brain injury biomarker S100 calcium-binding protein B (S100B) and immune response markers interferon gamma (IFN-γ) and interleukin-6 (IL-6) in the clinically relevant concentration ranges.
The handheld biosensing platforms employ optimized surface chemistries, including optimized blocking layers, to ensure exceptional specificity and reliability in complex biological fluids such as serum and saliva. The standalone first-in-field handheld system has the potential to support early disease detection and point-of-care healthcare—bridging advanced semiconductor technology with life sciences for impactful unmet clinical applications. The handheld diagnostic platforms represent a significant step toward integrated point-of-care solutions, bridging semiconductor device physics with translational biomedical diagnostics.
This body of work has been recognized with the AcSIR Best Thesis Award from the Academy of Scientific and Innovative Research (AcSIR), honoring outstanding doctoral research in semiconductor device engineering and GaN-based biosensing technologies. The research was accomplished through a collaborative framework involving the Council of Scientific & Industrial Research–Central Electronics Engineering Research Institute (CSIR-CEERI); Birla Institute of Technology and Science (BITS), Pilani; and Academy of Scientific and Innovative Research (AcSIR), bringing together complementary strengths in advanced transistor design, wide-bandgap electronics, and translational biosensor development. This recognition reflects the interdisciplinary depth, institutional synergy, and real-world translational impact achieved across a research program spanning emerging semiconductor technologies and point-of-care diagnostic systems.
Collectively, the body of work pushes the frontiers of semiconductor device engineering and applied biosensing, aiming to develop scalable, high-performance platforms that address critical challenges across healthcare, environmental monitoring, and information technology. It bridges micro- and nanoelectronics with healthcare and environmental diagnostics, enabling the design of scalable, energy-efficient devices and compact sensor systems. By combining rigorous materials and interface engineering with real-world sensing platforms, this research lays the foundation for next-generation technologies that are not only high-performing but also transformative in their societal impact.
Point-of-Care Medical Diagnostics
Handheld System Engineering and Development
Advanced Sensor Design and Development
Sensing and Biosensing Platforms Development
Scalable Power and RF Electronics
Modeling and Simulation of Semiconductor Devices
Computational Framework Design for Nano-Regime Devices
Micro- and Nanoelectronics