Publications
Utkal Suresh Patil, S. M. Jagadeesh Babu, M.K. Thota, S. Avinash, Rahul Ramesh Kulkarni, S. Gangolu, Dasharath S. M., Manjesh Kumar Mishra (2025): Effect of heat treatment process parameters, cooling rate on microstructure morphology, mechanical behavior and texture evolution of two phase (α+β) Ti-6Al-4V alloy, Journal of Alloys and Compounds, Volume 1035, 181592 pp 1-13. (Scopus Indexed; Science Citation Indexed) DOI: https://doi.org/10.1016/j.jallcom.2025.181592
Akash Mahato, Saurabh Srivastava, Sujit Goswami, Suman Kumar Pandey and Rahul Ramesh Kulkarni (2025): Evaluating equipment dependent forging behavior of aluminum alloy, Materials Research Proceedings, Materials Research Forum LLC, 55 pp 34-39. (Scopus Indexed) [Corresponding Author] DOI: https://doi.org/10.21741/9781644903612-6
Nitish Kumar, Banshidhara Mallik, Rahul Ramesh Kulkarni (2025): Modification of dye/fluorescent penetrant testing in accordance with Industry 4.0. Materials Research Proceedings, Materials Research Forum LLC, 55 pp 40-44. (Scopus Indexed) DOI: https://doi.org/10.21741/9781644903612-7
Rahul Ramesh Kulkarni and Vaishali Sushil Poddar (2025): Impact of cold upset forging during heat treatment in Al-1.1Si-0.97Mg Alloy. Engineering Research Express 7(1) 015407 pp 1-11. (Scopus Indexed; Science Citation Indexed) [Corresponding Author]. DOI: http://doi.org/10.1088/2631-8695/ada3b1
Rahul R. Kulkarni (2024): Progress in Non-Ferrous Alloy Behavior in Forging Technology, Advances in Manufacturing Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore. pp 405-413. (Scopus Indexed) [Corresponding Author]. DOI: https://doi.org/10.1007/978-981-97-4324-7_32
Rahul R. Kulkarni, Vishal L. Chakote, Vaibhav V. Shevale (2023): Comparative Study on Microstructure Evolution during Cold Forging and Warm Forging in AA6082, NanoWorld J 9(S1) pp S162-S165. (Scopus Indexed) [Corresponding Author]. DOI: https://doi.org/10.17756/nwj.2023-s1-033
Abhishek Kumar, Rahul R. Kulkarni, R. K. Ohdar (2023): Towards understanding the behavior of Magnesium alloy during different forging processes: An overview, Materials Today Proceedings (In Press). (Scopus Indexed) [Corresponding Author].
DOI: https://doi.org/10.1016/j.matpr.2023.03.448
Ranjan, A., Kumar, A., Kulkarni, R. (2023): Studies on Annealing Kinetics of Cold Forged AA6082, Advances in Manufacturing Engineering, Lecture Notes in Mechanical Engineering. Springer, Singapore, pp 345-351. (Scopus Indexed) [Corresponding Author].DOI: https://doi.org/10.1007/978-981-19-4208-2_24
Rahul Ramesh Kulkarni, Ashvani Kumar, Ashutosh Ranjan (2022): The Methods of Processing to Produce Fine Grain Structure in Magnesium Alloys: An Overview, AIP Conference Proceedings, 2653 pp 030005-1 to 030005-5. (Scopus Indexed) [Corresponding Author]. DOI: https://doi.org/10.1063/5.0110832
Kulkarni R.R., Mate S., Joseph S., D’sa N. (2021): Effect of Heat Treatment on Microstructure and Room Temperature Mechanical Properties in 55Si7 Spring Steel, Recent Advances in Smart Manufacturing and Materials. Lecture Notes in Mechanical Engineering. Springer, Singapore, pp 65-75. (Scopus Indexed) [Corresponding Author].
DOI: https://doi.org/10.1007/978-981-16-3033-0_7
Rahul R. Kulkarni, Nithyanand Prabhu, Bhagwati P. Kashyap (2017): Microstructure evolution during sand casting in AZ80 Mg alloy, VJER-Vishwakarma Journal of Engineering Research, 3(1) pp 198-204. [Corresponding Author].
Rahul R. Kulkarni, Nithyanand Prabhu, Peter D. Hodgson, Bhagwati P. Kashyap (2016): Temperature Dependent Flow Behavior and Microstructural Evolution during Compression of As-cast Mg-7.7Al-0.4Zn, Journal of Materials Engineering and Performance, 25 (10) pp 4145-4156. (Scopus Indexed, Science Citation Indexed). [Corresponding Author] DOI: https://doi.org/10.1007/s11665-016-2269-z
Rahul Ramesh Kulkarni, Nithyanand Prabhu, Peter D. Hodgson, Bhagwati Prasad Kashyap (2014): Kinetics of γ-Mg17Al12 Phase Dissolution and its Effect on Room Temperature Tensile Properties in as-cast AZ80 Magnesium Alloy, Solid State Phenomena, 209 pp 207-211. (Scopus Indexed).
DOI: https://doi.org/10.4028/www.scientific.net/SSP.209.207
Rajendra Doiphode, Rahul Kulkarni, S.V.S. Narayana Murty, Nithyanand Prabhu, Bhagwati Prasad Kashyap (2013): Effect of Severe Caliber Rolling on Superplastic Properties of Mg-3Al-1Zn (AZ31) Alloy, Materials Science Forum, 735 pp 327-331. (Scopus Indexed). DOI: https://doi.org/10.4028/www.scientific.net/MSF.735.327
Rahul R. Kulkarni, Nithyanand Prabhu, Peter D. Hodgson, Bhagwati P. Kashyap (2013): Temperature effect on second phase (Mg17Al12) and flow behavior in as-cast AZ80 Mg alloy, The proceedings of the International Conference on Emerging Material Technology ICEMT 2013 April 8-10, 2013, Jabalpur, Madhya Pradesh, India pp.1-6. [Corresponding Author].
Conference information page: https://ggits.org/international-conference-icemt-2013/
Kulkarni R.R., Prabhu N., Hodgson P.D., Kashyap B.P. (2012): Phase dissolution of γ-Mg17Al12 during homogenization of as-cast AZ80 Magnesium alloy and its effect on room temperature mechanical properties, Magnesium Technology 2012, PP 543-548. (Scopus Indexed). [Corresponding Author]. DOI: https://doi.org/10.1007/978-3-319-48203-3_96
Rahul R. Kulkarni, Nithyanand Prabhu, Peter D. Hodgson, Bhagwati P. Kashyap (2012): Effects of homogenization and rolling on microstructure and tensile properties of Mg-8.5Al-0.5Zn (AZ80) alloy at room temperature, Proceedings of the 3rd Asian Symposium on Materials & Processing ASMP 2012, IIT Madras, Chennai, 30-31, August 2012, p. NDTC_P1. [ISBN:978-93-80689-09-8] [Corresponding Author].
Kulkarni Rahul Ramesh, Jagannath Nayak, K. R. Hebbar (2009): Low temperature embrittlement studies on stainless steel 304LN TIG welds, Conference Proceeding, NCAME’09 (National Conference on Advances in Mechanical Engineering-2009), Mumbai pp. 282-285. [Corresponding Author].
Krishnan Sivaraman, Rahul Kulkarni, Jaydeep Joshi (2008): Lamellar Tearing - Causes and Prevention, Design Symposium-2008, Larsen & Toubro Limited, Mumbai. pp. 1-8.
Akash Mahato, Saurabh Shrivastava, Sujit Goswami, Suman Kumar Pandey, Rahul Ramesh Kulkarni: Evaluating Equipment- Dependant Forging Behavior of Aluminum Alloy, International Symposium on " Recent Advances in Materials Joining and Manufacturing Processes organized by the Department of Mechanical Engineering, Alva's Institute of Engineering and Technology, Moodbidri, Karnataka, on 27th and 28th February 2025.
Kulkarni Rahul Ramesh: Progress in Non-Ferrous Alloy Behavior in Forging Technology, 2nd International Conference on Futuristic Advancement in Materials, Manufacturing and Thermal Sciences (ICFAMMT-2024) held during 19-21January 2024 at IIT RAM Ahmedabad, Gujarat, India in association of Space Society of Mechanical Engineers (SSME), Space Application Center, ISRO Ahmedabad.
Rahul R. Kulkarni, Vishal L. Chakote, Vaibhav V. Shevale: Comparative Study on Microstructure Evolution during Cold Forging and Warm Forging in AA6082, International Conference on Innovation in Mechanical and Materials Engineering -2022 (IMME-2022) at Organized by Department of Mechanical Engineering, Motilal Nehru National Institute of Technology Allahabad, UP, India, November 04-06, 2022.
Ashutosh Ranjan, Ashvani Kumar, Rahul Kulkarni: Studies on Annealing Kinetics of Cold Forged AA6082, International Conference on Futuristic Advancement in Materials, Manufacturing and Thermal Sciences (IC-FAMMT 2022) at Institute of Infrastructure, Technology, Research and Management, Ahmedabad (An Autonomous University established by Government of Gujarat), January 20-22, 2022.
Rahul Kulkarni, Ashvani Kumar and Ashutosh Ranjan: An Overview on Processing Methods to Produce Fine Grain Structure in Magnesium Alloys, Virtual International Conference on Product Design, Development and Deployment (PD3-2021) at Vellore Institute of Technology (Recognized as Institution of Eminence (IoE) by Government of India), Vellore, September 11-12, 2021.
Rahul Kulkarni, Sumit Mate, Stephen Joseph and Nigel D’sa: Dependency of Heat Treatment on Microstructure and Room Temperature Mechanical Properties in 55Si7 Spring Steel, International Conference on Evolution in Manufacturing (ICEM 2020) at Department of Mechanical Engineering MNIT Jaipur in association with NIT Uttarakhand and NIT Warangal, December 10-12, 2020.
Rahul R. Kulkarni, Nithyanand Prabhu, Bhagwati Kashyap: Microstructure evolution during sand casting in AZ80 Mg alloy, 1st International Conference on Recent Trends in Engineering and Technology (ICRTET-2017) at Vishwakarma Institute of Information Technology, Pune, Maharashtra, India in association with Savitribai Phule Pune University, Pune Maharashtra, India, February 17-18, 2017.
Rahul R. Kulkarni, Nithyanand Prabhu, Peter Hodgson, Bhagwati Kashyap: Effects of Solutionizing and Deformation on Morphology of second phase in as cast AZ80 Mg alloy, International Conference on Emerging Material Technology (ICEMT-2013) at Jabalpur, Madhya Pradesh, India, April 8-10, 2013.
Rahul R. Kulkarni, Nithyanand Prabhu, Peter Hodgson, Bhagwati Kashyap: Effects of homogenization and rolling on microstructure and tensile properties of Mg-8.5Al-0.5Zn (AZ80) alloy at room temperature, 3rd Asian Symposium on Materials & Processing (ASMP 2012) at Indian Institute of Madras, Chennai, August 30-31, 2012.
Rahul R. Kulkarni, Nithyanand Prabhu, Peter Hodgson, Bhagwati Kashyap: Temperature dependence of flow behavior and microstructure evolution during compression of as-cast 7.7Al-0.4Zn-Mg alloy, 16th International conference on strength of Materials (16th ICSMA-2012) at Indian Institute of Science Bangalore August 19-24, 2012.
Nithyanand Prabhu, Bhagwati Kashyap, Peter Hodgson, Rahul Kulkarni, Pabitra Palai, V Srinivas: The effect of Die-Shape and die Parameters in ECAP on the microstructure and flow Properties of Some 2- Phase alloys, The Minerals, Metals & Materials Society (TMS 2012) at 141st Annual Meeting and Exhibition at Orlando, Florida, United States of America (USA) March 11-15, 2012.
1. Krishnan Sivaraman, Rahul Kulkarni, Jaydeep Joshi: Lamellar Tearing, Design symposium 2008 at FPEX and CGPP Leadership team, Larsen & Toubro Mumbai based on the theme of Business Excellence through Knowledge sharing, 2008.
2. Rahul R. Kulkarni: Laser Machining, National conference in Mechanical Engineering in G.H. Raisoni College of Engineering, Nagpur, Maharashtra, India, 2004.