Android 12 Head Unit Firmware ((TOP)) Download

So I am new to CarPlay/AA, I just had an aftermarket head unit installed in my 9 year old car since it wasn't new enough for a retrofit from the manufacturer. I purchased a Sony XAV-AX5500 from Crutchfield and had them do the installation.

I've only had a chance to play around with it for a little while, but it worked flawlessly for me on a 90 minute drive with no issues to speak of. Once I got home I double-checked my firmware version and I realized I was one update behind, my head unit has version 1.12 and the most recent one on the Sony website is 1.13. According to the website the firmware update does as follows:

Android 12 Head Unit Firmware Download

DOWNLOAD 🔥 https://tiurll.com/2y849W 🔥

Note: this update is only workable for Android car radio with octa core CPU with 2GB RAM+16GB ROM . Please contact us if you are not clear your head unit system .

otherwise the head unit will be damaged .

This update has the below features:

1. Add Z-Link app to run the Android Auto and iPhone Carplay

2. Optimize the System and apps

Kindly Warning:

1). Please download it from your windows computer and unzip it

2). Copy the unzipped files into an empty USB FAT32

3). Insert the USB into your car radio left side USB connector (the side without Wifi and GPS cable), then the unit will update automatically (if the head unit cannot detect the firmware to update, you can enter the car radio Settings - System and click the System Update button)

4). When updating, pls do not operate it and just wait it until the screen remind you to move the USB

5). After you remove the USB drive, the unit will restart automatically. After it reboot you need calibrate the touch screen.

After update succeed then you will find the Z-LINK app in the system menu, for the first time to run Z-Link app, you need connect the unit with internet.

Then when you enter the Z-Link app, it will remind you to fill in the Activation Code. Pls contact us support@joyingauto.com or info@joyingauto.com to get the Activation Code.

here is the video on how to update the system , please check :

1). Pls download it from your windows computer and unzip it

2). Copy the unzipped files into High Quality empty USB disk FAT32 and empty 32GB C10 SD Card

3). Insert the USB disk into your car radio left side USB connector(the side without Wifi and GPS cable), then the unit will update automatically

4). When use the USB updating, the unit enter recovery page to upgrade, then it will show "Doing Actions Failed ! Pls Remove the USB Disk... "

5). Then Remove the USB disk(pls do not turn off the unit), and insert the SD card to unit GPS Map slot directly, and click the reset button, then the unit will upgrade automatically(Pls attention, The SD card should have the same firmware with the USB disk in)

6). When updating, pls do not operate it and just wait it until the screen remind you to move the USB

7). After you remove the USB drive, the unit will restart automatically. After it reboot you need calibrate the touch screen.

Before flashing/updating the firmware, pls clarify a few points:

1. Only if you had tried to restart or restore the car stereo to factory settings, but these methods are not working, then we recommend you to flash the machine and firmware.

2. Flashing/updating the firmware is your last choice, it is used only after other solutions had been tried but failed; and it is better to ask for customer service help before download.

3. It is necessary to know the corresponding model of your head unit, please confirm it on the ESSGOO car audio product.

4. The flashing process may not be successful just at one time, then you may need to try 3-5 times by changing the computer, or re-downloading, or changing the SD/TF card or changing the U disk.

*Note:

The flashing/firmware package only cover 50% of ESSGOO auto multimedia products. If you cannot find the compatible linke, please feel free to contact us.

Confirm the system version of the head unit which is shown as below

To meet my goals, I decided I wanted to completely remove my car's radio in lieu of doing a tablet mounting system that connects to the head unit via Bluetooth or a headphone jack, which is what you typically see with these types of builds. I wanted my tablet to BE my head unit, thus minimizing noise and loss of sound quality, as well as reducing the amount of connections and plug ins that had to be made just to get music to play.

Sergey creates custom firmware for these Android Tesla-style screens for our cars. The firmware resolves common issues, offers additional themes and customization options, and eliminates some of the performance lag which exists on older units. 006ab0faaa