FOR INSTRUCTORS ONLY!
FOR INSTRUCTORS ONLY!
Charge the Pyxel
Check Pyxel's leg adjustment.
See: https://www.educationalinsights.com/codewith-pyxel-setup
Reset the WiFi password (see above)
Put stickers on the Pyxel and remote control / "Code Activator"
Upload the "idle" program and assign it to button 1.
Check that the "Code Activator" is paired with the Pyxel.
If not, see "Re-Pair the Code Activator (IR remote control)
To reset the password for the Pyxel dog, turn the unit on and allow it to sit, then quickly turn it off and on 3 times. The waist light will turn yellow and will play 2 beeps, indicating a successful reset. Wait for the another single beep. Turn off and on.
Connect to the "Pyxel Pet xxxx" WiFi.
If you get a prompt to enter a WiFi password, repeat the above reset process.
Clear the browser's site data (cookies) for local.codewithpyxel.com.
Open local.codewithpyxel.com and follow the proompt enter a new password.
(Be sure to remember the password.)
Pyxel will restart
Reconnect WiFi and enter the password
The Code Activator will only work with the PYXEL it is paired with. After trying the above, if the Code Activator still isn't working, reset the pairing following the instructions below:
Turn PYXEL off and on six times, leave it on, on the sixth time.
PYXEL will say "six" and then beep twice.
Waist light will turn Red.
PYXEL will beep one more time and the lights will turn off.
Turn PYXEL off and wait three seconds.
Turn PYXEL back on.
PYXEL's ears will flash red.
Point the Code Activator at PYXEL and press any button three times in a row to pair
If PYXEL reacts, you've paired your Code Activator.
https://www.educationalinsights.com/codewith-pyxel
https://www.educationalinsights.com/item-pyxel-a-coders-best-friend
https://www.amazon.com/dp/B0BQ8LJBR6