How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-10-03 · 7 min read · Independent comparison
• Pyle PRO On-Ear Audio — biggest strength: a full omnidirectional back-electret condenser mic with a 20Hz–20KHz frequency response, 2k Ohms output impedance, and a 4-pin mini XLR connector that works with Shure systems or a direct studio mixer connection.
• Pyle PRO On-Ear Audio — biggest trade-off: it is a wired, corded-electric microphone only. No Bluetooth, no battery-powered freedom, and it is built for speech and voice capture rather than listening to music.
• SOULWIT Ear Cushions — biggest strength: softer protein leather over high-density foam, thickened for bass response and shaped to keep a Jabra on-ear headset comfortable and looking new again.
• SOULWIT Ear Cushions — biggest trade-off: it is a replacement part, not a device. It only fits Evolve2 65, Evolve2 40, and Elite 45h models — and it explicitly does not fit the Evolve 65 Gen 1.0.
• Who each pick is for: the Pyle is for DJs, MCs, singers, actors, and anyone doing voice work who needs a hands-free headworn mic. The SOULWIT is for someone whose Jabra earpads have gone flat, cracked, or uncomfortable.
The Pyle PRO On-Ear Audio is a headworn condenser microphone, and it is honest about what it is. The element is a back electret condenser with an omnidirectional polar pattern, so it picks up your voice from every direction rather than forcing you to keep your mouth locked to one spot. That matters for performers who move — a DJ working a mixer, an MC pacing a stage, a singer who turns their head mid-phrase. The 20Hz–20KHz frequency response covers the full audible range for speech and vocals, and the sensitivity is rated at -44dB ± 3dB with a signal-to-noise ratio of 78dB. In practical terms, that is a mic designed to capture a voice cleanly at close range.
The connector is the detail that decides whether this works for you. It terminates in a 4-pin mini XLR, which the spec sheet says pairs with a Shure system or a direct studio mixer connection. If your existing setup already speaks that language, this headset slots in without a pile of adapters. If it does not, you need to plan for the interface before you buy. The power supply range is DC 1.5V–10V, and the sheet notes a lithium-ion battery is required — though the power source is listed as corded electric, so think of this as a wired mic that needs proper supply from your gear rather than something you charge and roam with.
The physical design is where this mic earns its keep. It weighs 13g at the mic itself (60g listed as the item weight), the frame is metal, and the sheet specifically calls out that the durable metal frame fits comfortably for users wearing glasses, hats, or headphones. That is not a marketing throwaway — anyone who has worn a cheap plastic headset for three hours knows exactly why a metal frame matters. The beige, skin-tone finish is meant to blend in, which is why actors and presenters tend to reach for this style. It ships with two windscreens, and you get a 1-year warranty.
SOULWIT Ear Cushions: Who It's For
The SOULWIT Ear Cushions solve a much narrower but very real problem. Your Jabra Evolve2 65, Evolve2 40, or Elite 45h on-ear headset still works perfectly — the electronics are fine — but the pads have gone flat, stiff, or flaky. That is the moment this product exists for. SOULWIT builds these from softer protein leather wrapped around high-density foam, and the pads are thickened specifically for stronger bass and longer-wearing comfort. The claim worth noting is that they will not go flat and cause discomfort over time, which is the exact failure mode that sends people shopping for replacements in the first place.
Compatibility is the whole ballgame here, and SOULWIT is admirably blunt about it. These fit Evolve2 65 in its MS and UC variants, Evolve2 40 in its UC, MS, and USB variants, and the Elite 45h on-ear headset. They do not fit the Evolve 65 Gen 1.0. Check your model number before ordering — that single step prevents the most common disappointment with any earpad purchase. The pads are black faux leather and measure 6.1 x 4.53 x 0.87 inches.
Installation is billed as a few-minute job, and the design intent is that the pads seat perfectly without fuss. SOULWIT also makes a point that their modeled pads will not degrade your headphone's sound performance — the reasoning being that worn-out original pads are already hurting your audio, so a precise replacement brings the headset back rather than changing its character. There is no warranty listed on this product, which is worth knowing going in.
Who should buy it: anyone with a compatible Jabra on-ear whose pads are worn, uncomfortable, or flaking. Who should skip it: anyone with the Evolve 65 Gen 1.0, any other headset brand, or anyone expecting these to change how their headset fundamentally sounds. These restore; they do not upgrade the headset itself.
• Best for capturing your voice → Pyle PRO On-Ear Audio. It is an actual omnidirectional condenser mic with a 20Hz–20KHz response, not an accessory.
• Best for reviving gear you already own → SOULWIT Ear Cushions. If your Jabra works but feels bad, this is the fix.
• Best for wireless freedom → neither, strictly speaking. The Pyle is corded electric, and the SOULWIT is a passive replacement part.
• Best for wearing with glasses or a hat → Pyle PRO On-Ear Audio. The metal frame is specifically designed to sit comfortably over eyewear and headwear.
• Best for stage and studio voice work → Pyle PRO On-Ear Audio. The 4-pin mini XLR and Shure/mixer compatibility point straight at performance use.
• Best for everyday office calls → SOULWIT Ear Cushions. Restoring comfort on a Jabra Evolve2 or Elite 45h is exactly the on-ear headset scenario these pads target.
• Best for long-session comfort → SOULWIT Ear Cushions. Thickened high-density foam that resists going flat is the entire pitch.
• Best for a low-effort purchase → SOULWIT Ear Cushions. Confirm your model, install in minutes, done. The Pyle demands you check your connector and power supply first.
If I had to pick one for myself, it comes down to what I already own. For anyone doing voice, stage, or studio work, I would buy the Pyle PRO On-Ear Audio — the omnidirectional condenser, the metal glasses-friendly frame, the 4-pin mini XLR, and the 1-year warranty make it a genuinely capable headworn mic for its job. But if my Jabra Evolve2 65 or Elite 45h had gone uncomfortable, I would buy the SOULWIT Ear Cushions without hesitating, because throwing away a working headset over worn foam is a waste. In my opinion, buy the Pyle to perform and the SOULWIT to repair — they are not competitors, they are answers to two different questions.
what is on ear headset
An on-ear headset rests against the outside of your ear rather than surrounding it. That is the category both products live near: the Pyle is a headworn mic that sits at the ear, and the SOULWIT pads are made specifically for on-ear Jabra models like the Evolve2 65, Evolve2 40, and Elite 45h.
what is over ear headset
An over-ear (circumaural) headset fully encloses your ear inside the cushion. Neither product here is over-ear: the SOULWIT pads are cut for on-ear Jabra headsets, and the Pyle is a lightweight headworn microphone at 13g, not a full-size listening headphone.
how to open headset ear
On most on-ear headsets you gently pull the cushion away from the housing to release it, which is how you would remove worn pads before fitting replacements. SOULWIT describes its pads as seating perfectly with installation completed in a few minutes, so the swap is designed to be straightforward.
how to wear one ear headset
A single-ear headset sits with the mic boom near your mouth and the earpiece resting on one ear, leaving the other ear open. The Pyle's omnidirectional pickup means you do not have to aim the mic precisely — it captures your voice from any direction, which suits performers who move.
If you are weighing these two, check the current price on Amazon before you commit, since they serve such different needs that cost is really the last thing to compare.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: defean Black Earpads vs RDHFTNIHU Protein Leather Earpads, SGNICS Earbuds vs AWEI Earbuds: Ipx6 Waterproof Headphones, MUSICOZY 5.4 vs TOZO NC9, TOZO NC3 vs iKmai Earbuds: Hybrid ANC Earbuds