AREA VIII: Physical Plant and facilities

The quality and adequacy of the physical plant and facilities of a learning institution determine to a large measure the successful implementation of its curricular programs. In a broad sense, physical plant and facilities include school campus, buildings and other physical infrastructures, equipment and services that complement institutional and program effectiveness.


Click the text above to access file.

Click the text above to access file.

PARAMETERS WITH EVIDENCE


Parameter a: SYSTEM - INPUTS AND PROCESSES

  • S.1. There is a Site Development Plan, and program of implementation.

  • S.2. The Campus has accessible good roads and pathways.

  • S.3. The Campus is well-planned, clean properly landscaped.

  • S.4. There is a system to ensure that all of the following are provided:

  • S.4.1. traffic safety in and outside the campus;

  • S.4.2. waste management program;

  • S.4.3. proper utilization, repair and upkeep of school facilities and equipment; and

  • S.4.4. cleanliness and orderliness of the school campus.

  • S.5. An area for outdoor educational activities, e.g. social, physical, athletic, cultural, military training, etc. exists.

  • S.6. There is a campus security unit that ensures safety of the academic community.

CAMPUS

Parameter a: IMPLEMENTATION

  • I.1. The site infrastructure development plan is implemented as planned.

  • I.2. The site plan is strategically displayed inside the campus indicating the location of the different buildings, driveways, parking areas, etc.

  • I.3. The infrastructure development plan is implemented in accordance with approved zoning ordinances.

  • I.4. Covered walks are provided to protect the academic community from inclement weather.

  • I.5. The institution implements a Waste Management Program.

CAMPUS

PARAMETER A:

OUTCOME

  • O.1. The Campus environment is conducive to all education activities.

  • O.2. The site can accommodate its present school population and future expansion.

  • O.3. The campus is safe and well-maintained.

CAMPUS

Parameter b: SYSTEM - INPUTS AND PROCESSES

  • S.1. The building meet all requirements of the Building Code. A Certificate of Occupancy for each building is conspicuously displayed.

  • S.2. The buildings are constructed according to their respective uses.

  • S.3. The buildings are well-planned and appropriately located to provide for future expansion.

  • S.4. Entry and exit points permit the use of the building for public and other functions with minimum interference to school activities.

  • S.5. Emergency exits are provided and properly marked.

  • S.6. The buildings are equipped with emergency/fire escapes which are readily accessible.

  • S.7. The corridors, doorways, and alleys are well-constructed for better mobility.

  • S.8. The buildings are well-ventilated and lighted.

  • S.9. The buildings have facilities for persons with disability (PWDs) as provided by law.

  • S.10. There is a central signal and fire alarm system.

  • S.11. There are readily accessible and functional fire extinguishers and other fire-fighting equipment.

  • S.12. Bulletin boards, display boards, waste disposal containers and other amenities are strategically located inside the buildings.

  • S.13. There are faculty rooms and offices.

  • S.14. The buildings are insured.

BUILDINGS

Parameter b: IMPLEMENTATION

  • I.1. The buildings are clean, well-maintained and free from vandalistic acts.

  • I.2. Toilets are clean and well-maintained.

  • I.3. Electrical lines are safely installed and periodically checked.

  • I.4. Water facilities are functional and well-distributed in all buildings.

  • I.5. There is a periodic potability testing of drinking water.

  • I.6. Floor plans indicating fire exits and location of fire-fighting equipment, stand pipes, and other water sources are conspicuously displayed each building.

  • I.7. All school facilities are periodically subjected to pest control and inspection.

  • I.8. Smoking is strictly prohibited inside the campus.

  • I.9. Periodic drill on disaster and risk reduction (earthquake, flood, fire, etc.) is conducted.

BUILDINGS

PARAMETER b:

OUTCOME

  • O.1. The buildings and other facilities are safe, well-maintained and functional.

BUILDINGS

Parameter c: SYSTEM - INPUTS AND PROCESSES

  • S.1. Classroom size (1.5 sq. m. per student) meets standard specifications for instruction.

  • S.2. The classrooms are well-lighted, ventilated and acoustically conditioned.

  • S.3. The classrooms are adequate and are provided with enough chairs, furniture and equipment.

  • S.4. There are sufficient supplies (chalkboards/whiteboards, and instructional materials) in each classroom.

CLASSROOMS

Parameter c: IMPLEMENTATION

  • I.1. The classrooms are clearly marked and arranged relative to their functions.

  • I.2. The classrooms are well-maintained and free from interference.

  • I.3. Students cooperate in maintaining the cleanliness and orderliness of the classrooms.

CLASSROOMS

PARAMETER c:

OUTCOME

  • O.1. Classrooms are adequate and conducive to learning.

CLASSROOMS

Parameter d: SYSTEM - INPUTS AND PROCESSES

  • S.1. The administrative offices are accessible to stakeholders.

  • S.2. All offices are accessible and conveniently located in accordance to their functions.

  • S.3. There are offices and workspaces for all officials, faculty and administrative staff.

  • S.4. Administration and faculty offices and staff rooms are clean, well-lighted and ventilated.

  • S.5. Function rooms and lounge are available and accessible.

  • S.6. Storerooms are strategically located.

  • S.7. There is internal and external communication system.

  • S.8. There are clean toilets for administrators, faculty, staff, and students.

OFFICES AND STAFF ROOMS

Parameter d: IMPLEMENTATION

  • I.1. All officers are furnished with the necessary equipment, furniture, supplies and materials.

  • I.2. All offices are well-maintained.

OFFICES AND STAFF ROOMS

PARAMETER d:

OUTCOME

  • O.1. The offices and staff rooms are adequate and conducive to working environment.

OFFICES AND STAFF ROOMS

Parameter e: SYSTEM - INPUTS AND PROCESSES

  • S.1. Function rooms for holding meetings, conferences, convocations and similar activities are sufficient.

  • S.2. Facilities for athletics sports, cultural activities, military training, etc. are accessible.

  • S.3. The seating capacity conforms to standards.

  • S.4. There are adequate and well-marked entry and exits points.

  • S.5. There are storage facilities for athletic sports and other curricular training equipment.

ASSEMBLY, ATHLETIC AND SPORTS FACILITIES

Parameter e: IMPLEMENTATION

  • I.1. Indoor facilities are constructed with:

      • I.1.1. appropriate flooring;

      • I.1.2. proper lighting and ventilation;

      • I.1.3 safety measures;

      • I.1.4. toilets;

      • I.1.5. functional drinking facilities; and

      • I.1.6. enough chairs.

  • I.2. The constructed outdoor facilities are:

      • I.2.1. free from hazards;

      • I.2.2. suitably surfaced floor;

      • I.2.3. appropriately laid out for a variety of activities;

      • I.2.4. properly maintained secured; and

      • I.2.5. installed with drainage system.

  • I.3. Assembly, athletic sports and cultural facilities are sufficient and varied to meet the requirements of the institution.

  • I.4. Audio-visual room and facilities with appropriate equipment are utilized in support of the teaching-learning such as but not limited to video/overhead/slide projector, sound system, LCD projectors and screens.

ASSEMBLY, ATHLETIC AND SPORTS FACILITIES

PARAMETER e:

OUTCOME

  • O.1. Indoor and outdoors facilities are well-equipped and properly maintained.

ASSEMBLY, ATHLETIC AND SPORTS FACILITIES

Parameter f: SYSTEM - INPUTS AND PROCESSES

  • S.1. The Medical and Dental Clinic has basic facilities such as: reception area, records section, examination/treatment from room and toilets.

  • S.2. The institution has functional medical and dental section/area.

  • S.3. Potable water is available and sufficient.

  • S.4. Medical and dental equipment are provided.

  • S.5. There are enough medical and dental supplies and materials.

  • S.6. Storage facilities (refrigerator, steel cabinets, etc.) are available.

  • S.7. Medical and dental supplies and materials are properly labeled.

  • S.8. The following basic medical equipment and medicines are all available:

      • S.8.1. emergency medicines;

      • S.8.2. ambobag;

      • S.8.3. oxygen tank;

      • S.8.4. intravenous fluid;

      • S.8.5. sphygmomanometer (at least 2 sets);

      • S.8.6. thermometer (at least 10 pcs.);

      • S.8.7. diagnostic sets;

      • S.8.8. stethoscope (at least 2 units);

      • S.8.9. treatment cart; and

      • S.8.10. nebulizer.

  • S.9. The following basic dental equipment and apparatuses are available:

      • S.9.1. dental chair;

      • S.9.2. autoclave (sterilizer);

      • S.9.3. medical supplies;

      • S.9.4. filling instruments; and

      • S.9.5. basic instruments (forceps, mouth mirror, cotton fliers, explorer, etc.)

  • S.10. The Medical/Dental Clinic has ample space, adequate lightings and ventilation.

MEDICAL AND DENTAL CLINIC

Parameter f: IMPLEMENTATION

  • I.1. The Medical and Dental Clinics are managed by qualified medical and dental officers.

  • I.2. Distinct rooms and storage areas are properly labeled.

  • I.3. Medical and dental services are regularly monitored and evaluated

MEDICAL AND DENTAL CLINIC

PARAMETER f:

OUTCOME

  • O.1. The medical, dental clinic and services are functional.

MEDICAL AND DENTAL CLINIC

Parameter g: SYSTEM - INPUTS AND PROCESSES

  • S.1. The institution has a Student Center with supplies and materials.

  • S.2. Policies and guidance on the proper utilization of Student Center are in place.

  • S.3. The Student Center is well-lighted and ventilated.

  • S.4. A conference room is available for students’ use.

  • S.5. There are facilities and equipment for table games, music, appreciation, and TV or video viewing.

  • S.6. Clean and sanitary toilets, for men separate from those of women are available.

  • S.7. Toilet fixtures for students with special needs and PWD’s are provided.

  • S.8. There are offices for student leaders, the editorial staff of the student publication and the officers of other student organizations.

STUDENT CENTER

Parameter g: IMPLEMENTATION

  • I.1. Student activities at the student center are regularly conducted and monitored.

  • I.2. The Student Center is properly maintained.

STUDENT CENTER

PARAMETER g:

OUTCOME

  • O.1. The Student Center is fully equipped and functional.

STUDENT CENTER

Parameter h: SYSTEM - INPUTS AND PROCESSES

  • S.1. The canteen/cafeteria is well-lighted, ventilated, screened and provided with potable water supply.

  • S.2. There are enough;

      • S.2.1. cooking and preparatory equipment;

      • S.2.2. serving tools and utensils;

      • S.2.3. cleaning supplies and materials; and

      • S.2.4. dining table and chairs.

  • S.3. Wash area and toilets are available.

FOOD SERVICES/CANTEEN/CAFETERIAL

Parameter h: IMPLEMENTATION

  • I.1. The institution requires business and sanitary permits for the operation of the Food Center/Cafeteria/Canteen.

  • I.2. Food served is varied, nutritious, safe and sold at affordable price.

  • I.3. The Food Center/Cafeteria/Canteen is well managed by qualified and competent staff.

  • I.4. Cleanliness and orderliness are enforced.

  • I.5. The food services are prompt.

FOOD SERVICES/CANTEEN/CAFETERIAL

PARAMETER h:

OUTCOME

  • O.1. The Canteen/Cafeteria/Food Center is well-patronized.

  • O.2. The food services generate income for the institution.

FOOD SERVICES/CANTEEN/CAFETERIAL

Parameter i: SYSTEM - INPUTS AND PROCESSES

  • S.1. The Accreditation Center (AC) is accessible and conveniently located.

  • S.2. The AC has the following equipment and fixtures:

  • S.2.1. working tables and chairs;

  • S.2.2. cabinets for display and filing;

  • S.2.3. good ventilation and lighting;

  • S.2.4. computer unit;

  • S.2.5. toilets; and

  • S.2.6. lounge.

ACCREDITATION CENTER

Parameter i: IMPLEMENTATION

  • I.1. The Institution/College maintains the AC with the required resources, furniture, and documents.

  • I.2. The AC is managed by a qualified and committed staff/faculty.

  • I.3. Required documents/information and exhibits are updated systematically packaged and readily available.

ACCREDITATION CENTER

PARAMETER i:

OUTCOME

  • O.1. The AC is well-equipped and managed.

ACCREDITATION CENTER

Parameter j: SYSTEM - INPUTS AND PROCESSES

  • S.1. There are dormitories and housing facilities for students, faculty and staff.

  • S.2. There is an Implementing Rules and Regulation for in-campus housing services.

  • S.3. There is a system of coordinating with LGU’s on privately owned boarding houses.

HOUSING

(optional)

Parameter j: IMPLEMENTATION

  • I.1. The housing facilities are functionally designed.

  • I.2. The housing facilities and surroundings are properly maintained and monitored.

  • I.3. The IRR on housing service is strictly followed (e.g. dormitory fees, etc.)

  • I.4. The institution coordinates with LGU’s and owners of private boarding houses.

HOUSING

(optional)

PARAMETER j:

OUTCOME

  • O.1. The housing facilities are safe, habitable and well-maintained.

  • O.2. There is wholesome coordination among the institution, the LGU’s and the owners of private boarding houses.

HOUSING

(optional)

Click the text above to access file.

OTHER EXHIBITS

Click the text above to access files.

ASSOC. PROF. EMEJIDIO C. GEPILA JR.

AREA VIII, FACULTY-IN-CHARGE

Email Address: ecgepilajr@pup.edu.ph