HARD WORK NEVER FAILS
Modelling of Manufacturing Processes
Severe Plastic Deformation Processes
Design of Experiments / Optimization of process parameters
Experimental Investigations in Metal Joining / Forming
1. Title: Design and Development of low cost die – set up assembly for Superplastic forming of Light Alloys
Principal Guide.: Dr. J. Kandasamy
Sponsoring Agency: Institution of Engineers India (IEI)
Sponsored Amount: Rs. 20,000/- (Rupees Twenty Thousand only)
Project Status: Completed (October 2018 to May 2019)
2. Title: Experimental and Computational Investigations on Superplastic Forming of Aluminium Coated Magnesium alloys
Principal Investigator: Dr. J. Kandasamy
Sponsoring Agency: SERO, UGC
Sponsored Amount: Rs. 3,05,000/- (Rupees Three Lakhs Five Thousand only)
Project Status: Completed (April 2018 to February 2020)
3. Title: Design, Development and Fabrication of Equal Chanel Forming dies with Environment Friendly Lubricants
Principal Guide.: Dr. J. Kandasamy
Sponsoring Agency: Institution of Engineers India (IEI)
Sponsored Amount: Rs. 20,000/- (Rupees Twenty Thousand only)
Project Status: Completed (August 2019 to July 2020)
4. Title: 120 Tonne Die Casting Machine
Principal Investigator: Dr. J. Kandasamy
Sponsoring Agency: MODROBS, AICTE
Sponsored Amount: Rs. 9,00,000/- (Rupees Nine Lakhs only)
Project Status: Ongoing (December 2019 to November 2021)
5. Title: Computational Analysis and Experimental Investigations on Formability of Sheets Processed through Powder Metallurgy Routes
Principal Investigator: Dr. J. Kandasamy
Sponsoring Agency: RPS, AQIS, AICTE
Sponsored Amount: 17, 27,451/-
Project Status: Ongoing (August 2020 to July 2023)
13. J. Kandasamy, KVRK Subrahmanyam D Kamal Kumar, Finite Element Simulation and Experimental Investigations on Flow behavior of Aluminum Alloys in Equal Channel Angular Pressing, Materials Today: Proceedings, Elsevier, October (2019) 5515–5522.
12. J. Kandasamy, J Sairam, M Manzoor Hussain, Comparative Analysis of Temperature Variation in Friction Stir Welding, Materials Today: Proceedings, Elsevier, October (2018) 18798–18804, 2214-2221.
11. J. Kandasamy, N Shravan Kumar Reddy, Investigations on the Surface Hardness and Roughness of Roller Investigations on the Surface Hardness and Roughness of Burnished Surfaces, International Journal of Modern Engineering and Research Technology, Volume 5, Special Issue, June 2018 ISSN: 2348-8565 (Online) Pg. 339 - 346
10. J. Kandasamy, M. Madhavi, N. Haritha, Free Vibration Analysis of Thin Cylindrical Shells Subjected to Internal Pressure and Finite Element Analysis, IJRET: International Journal of Research in Engineering and Technology, Vol. 5, Special Issue 13, September 2017, ISSN: 2321-7308, pp. 40 – 48
9. Anjaiah Madarapu, Abhijith Dutta, M Manzoor Hussain, J. Kandasamy, Gas Blow Forming of AZ31 Magnesium Alloy in Box Shaped Dies, International Journal of Current Engineering and Scientific Research (IJCESR), ISSN (PRINT): 2393-8374, (Online): 2394-0697, Volume-4, Issue-8, August 2017, Pg. No. 1 – 8.
8. Anjaiah Madarapu, Abhijith Dutta, M Manzoor Hussain, J Kandasamy, Near-Net-Shape Superplastic Forming of Intricate Shaped Magnesium Alloy Components, International Journal of Emerging Technologies and Engineering (IJETE) Volume 4 Issue 7, July 2017, ISSN 2348 – 8050, Pg. No. 7 – 14.
7. Anjaiah Madarapu, Abhijith Dutta, M Manzoor Hussain, J. Kandasamy, Some Investigations on Super Plastic Forming of Magnesium Alloys in Cylindrical Dies, Journal of Manufacturing Engineering, June, 2017, Vol. 12, Issue. 2, pp.108-113
6. Syed Mohibuddin Bukhari, J. Kandasamy, M Manzoor Hussain, Investigations on drilling process parameters of Hybrid Composites with different stacking sequence, Materials Today: Proceedings Volume 4, Issue 2, Part A, April 2017, Pages 2184–2193, https:// doi.org/10.1016/ j.matpr.2017.02.065
5. Syed Mohibuddin Bukhari, J. Kandasamy, M Manzoor Hussain, Development of a new Drilling Tool for Drilling Hybrid Composites, International Journal on Mechanical Engineering and Robotics, ISSN: 2321 – 5747, Volume 4, Issue 5, 2016, pp. 17 – 20.
4. Syed Mohibuddin Bukhari, J. Kandasamy, M Manzoor Hussain, Optimization of the Drilling Process Parameters of glass reinforced plastic composites, International Journal of Emerging Technology and Research, ISSN: 2347 – 6079, Volume 1, Issue 6, September 2014, pp. 14 – 19.
3. J. Kandasamy, M. Manzoor Hussain, S. Rajesham, Heterogeneous Friction Stir Welding: Improved Properties in Dissimilar Aluminium Alloy Joints through Insertion of Copper coupled with External Heating, International Journal of Materials and Manufacturing Processes, 27:12, 1429-1436, Taylor and Francis Group, Link to the article: http://dx.Doi.org/10.1080/10426914. 2012.709340, 2012
2. J. Kandasamy, M. Manzoor Hussain, S. Rajesham, Experimental Investigations and Comparative analysis of Friction Stir Welded AA7075 alloy with and without copper as external alloying element in different forms, International Journal of Microstructure and Materials Properties Vol.7, No.4, 2012. Inderscience Publications.
1. J. Kandasamy, M. Manzoor Hussain, S. Rajesham, Modifications in friction stir welding fixture design for stronger IMC and superior mechanical properties in AA7075 alloys, International Journal on Mechanical & Automobile Engineering (IJMAE) ISSN 0974 -231X, August 2011 – September 2011, Fall Edition 2011, Volume 17, Issue No. 01, pp. 21 – 26.
9. J. Kandasamy, M. Anjaiah, M Manzoor Hussain, Investigations on Temperature Distribution in Friction Stir Welded Aluminum Plates, Technology Spectrum: Journal of Jawaharlal Nehru Technological University Hyderabad, Hyderabad ISSN: 0974 – 6854, Volume 4, No.2, Feb 2018, pp. 145 – 152.
8. J. Kandasamy, B. Ravikumar, M. Madhavi, Experimental Investigations on Natural frequencies of a Mono Composite and Steel Leaf springs using Fast Fourier Transforms, i-manager’s Journal on Material Science, Vol. 1, No. 2, July – September 2013, pp.12 – 18.
7. J. Kandasamy, M. Manzoor Hussain, S. Rajesham, Computational Analysis and Experimental Investigations on the Influence of the FSW tool pin profiles towards superior IMC in AA7075 Aluminum alloys, i-manager’s Journal on Mechanical Engineering, Vol. 2, No. 2, February - April 2012, pp. 9 – 16.
6. J. Kandasamy, M. Manzoor Hussain, S. Rajesham, Investigations on the effect of rolling direction on the IMC formed during Friction Stir Welding of AA7075 alloys, The IUP Journal of Mechanical Engineering, Vol.4, No.3, August 2011, pp. 44 – 54.
5. J. Kandasamy, M. Manzoor Hussain, S. Rajesham, Mechanical and Metallurgical Characterization of the IMC formed in copper coated aluminum alloys in friction stir welding, i-manager’s Journal on Mechanical Engineering, Vol. 1, No. 2, February - April 2011, pp. 9 – 16
4. J. Kandasamy, M. Govindaraju M. Manzoor Hussain, S. Rajesham, Investigations on the Friction Stir Welded AA6351 Aluminum Joints with Copper Inserts, Journal of Cooperation among University Research and Industrial Enterprises CURIE, Vol. 5, Issue 3 & 4, October 2010 – January 2011, ISSN: 0974 – 1305, pp. 43 – 50.
3. J. Kandasamy, M. Govindaraju M. Manzoor Hussain, S. Rajesham, Experimental Investigations on the influence of the position of plates in FSW for dissimilar aluminium alloys, MTT, Manufacturing Technology Today, Volume 9, Issue 7 – 8, July August 2010, ISSN: 0972 – 7396, pp. 3 – 10
2. J. Kandasamy, M. Manzoor Hussain, S. Rajesham, Brazing of Silicon Carbide using Ni based alloy and characterization of the joints, MTT, Manufacturing Technology Today, Volume 9, Issue 7 – 8, July August 2010, ISSN: 0972 – 7396, pp. 3 – 10
1. J. Kandasamy, M. Govindaraju M. Manzoor Hussain, S. Rajesham, Dissimilar Friction Stir Welds in Aluminium Alloys: Optimization of the Process Parameters for Tensile strength and Metallurgical Characterization, Technology Spectrum: Journal of Jawaharlal Nehru Technological University Hyderabad, Hyderabad ISSN: 0974 – 6854, Volume 4, No.2, July 2010, pp. 43 – 51.
22. J. Kandasamy, FE Analysis of Super Plastic Forming of complex shapes in Aluminum Coated Magnesium Alloys, Proceedings of the 3rd International conference on Innovations in Mechanical Engineering, ICIME – 2020, Guru Nanak Institutions, Hyderabad, 9 – 10 January 2020, pp. 120.
21. J. Kandasamy, M Ranjith Kumar, Formability Analysis on the Gas Formed Aluminum coated Magnesium alloys in Conical Dies, Proceedings of the International Conference on Emerging Trends in Engineering, ICETE – 2019, University college of Engineering, Osmania University, Hyderabad, 22 – 23 March 2019, pp.113
20. J. Kandasamy, KVRK Subrahmanyam D Kamal Kumar, Finite Element Simulation and Experimental Investigations on Flow behavior of Aluminum Alloys in Equal Channel Angular Pressing, Proceedings of the 9th International Conference of Materials Processing and Characterization, ICMPC-2019, GRIET, Hyderabad, 08 – 10, March, 2019, pg. No.99
19. J Kandasamy, Anjaiah Madarapu, D Sri Sai Ganesh, Near Net Shape Forming of Magnesium Alloys Superplastically – Computational Analysis and Experimental Investigations, ISBN: 978-93-80689-28-9, pp. 47 – 52, Proceedings of 10th International Conference on Meso, Micro and Nano Engineering, COPEN – 10, December 07 – 09, 2017 Indian Institute of Technology Madras, Chennai – 600 036, INDIA.
18. M. Manzoor Hussain, V. Pitchi Raju, J. Kandasamy, D.Govardhan, Prediction of Tensile and Shear Strength of Friction Surfaced Tool Steel Deposit by Using Artificial Neural Networks, IOP Conference Series: Materials Science and Engineering, 346 (2018) 012086, doi:10.1088/1757-899X/346/1/012086, International Conference on Materials and Manufacturing Technology, 28 – 29 November, 2017, BITS Dubai Campus.
17. Syed Mohibuddin Bukhari, J. Kandasamy, M Manzoor Hussain, Development of a new Drilling Tool for Drilling Hybrid Composites, Proceedings of International Conference on Technological Innovations in Mechanical Engineering, 10 – 11, February 2016, CBIT, Hyderabad.
16. J. Kandasamy, M.Govindaraju, Thin Sheet Magnesium Alloy Composite – Novel Materials for Automotive and Aerospace sectors, Proceedings of International Conference and Expo on Magnesium, 2 – 4, February 2016, Jointly organized by Indian Institute for Metals, Chennai Chapter and VIT Chennai.
14. Syed Mohibuddin Bukhari, J. Kandasamy, M Manzoor Hussain, Computational Analysis on the stacking sequence on Hybrid Composites and drilling process parameters optimization experimental analysis. Proceedings of International Conference on Material Processing and Characterization. 12 – 13, March 2016, Jointly organized by Maulana Azad National Institute of Technology, GRIET Hyderabad.
15. Govindaraju M, J. Kandasamy, Friction Based Manufacturing (FBM) Processes, Proceedings of the International Conference on Advances in Materials, Manufacturing and Applications (AMMA 2015), April 9 – 11, 2015, National Institute of Technology, Tiruchirapalli. pp. 223 – 230.
14. J. Kandasamy, K.Krishnakanth, Some Investigations on Superplastic forming of Titanium alloys, Proceedings of the International Conference on Advances in Materials, Manufacturing and Applications (AMMA 2015), April 9 – 11, 2015, National Institute of Technology, Tiruchirapalli. pp. 475 – 482.
13. S V Narasimha Rao, J. Kandasamy, M Manzoor Hussain, S Rajesham, Experimental Investigations on Microhardness of ECAP Al Alloys at different temperatures, Proceedings of International Conference on Recent Trends in Mechanical Engineering, 20 – 21, November 2015, Narasorapeta Engineering College, AP.
12. J. Kandasamy, Lokeswari, Finite Element Analysis of Super Plastic Forming of Titanium alloys, Proceedings of International Conference on Recent Trends in Mechanical Engineering, 20 – 21, November 2015, Narasorapeta Engineering College, AP.
11. M. Anjaiah, Abhijith Dutta, J. Kandasamy, M. Manzoor Hussain, Computational Analysis on the strength coefficient and strain rate sensitivity Index in Superplastic forming of Titanium alloys, International Conference on Emerging Technologies in Mechanical Sciences, 26 – 27, December 2014, Malla Reddy College of Engineering and Technology, Hyderabad.
10. S. V. Narasimha Rao, J. Kandasamy, M. Manzoor Hussain, S. Rajesham, Computational and Microstructural Analysis of Equal Channel Angular Pressing through different Channel Angles, International Conference on Recent Advances in Material Processing Technology, 07 – 09 January 2013, National Engineering College, Kovilpatti.
9. M. Anjaiah, Abhijith Dutta, J. Kandasamy, M. Manzoor Hussain, Indigenous Die Design for Superplastic Forming of Pb-Sn Alloys by Gas Pressure, International Conference on Recent Advances in Material Processing Technology, 07 – 09 January 2013, National Engineering College, Kovilpatti.
8. J. Kandasamy, M. Govindaraju M. Manzoor Hussain, S. Rajesham, Some aspects of copper coating and external heating on the temperature gradient in Friction Stir Welding of aluminium alloys, International Conference on Material Processing and Characterization, 08 – 10 March 2012, Gokaraju Rangaraju Institute of Engineering and Technology, Bachupally, Hyderabad.
7. M Govindaraju, J. Kandasamy, M Manzoor Hussain, K Prasada Rao, Some Aspects of Cross Butt Friction Stir Weldments of Rare Earth Magnesium Alloys – Novel attempts in Friction Stir Welding, Proceedings of the International Conference on Intelligent Manufacturing Systems (ICIMS 2012), SASTRA University, Tanjore, 16 – 17 February 2012.
6. J. Kandasamy, M. Govindaraju M. Manzoor Hussain, S. Rajesham, Experimental Investigations on the influence of external heating on the mechanical and metallurgical properties in Friction Stir Welding of AA7075 alloys, ICDAAME-2011, 16 – 17 December 2011, SKP Engineering College, Tiruvannamalai, Tamilnadu, India.
5. J. Kandasamy, M. Govindaraju, M. Manzoor Hussain, S. Rajesham, Design, manufacture and analysis of a friction stir welding tool to join aluminium 6 series alloys, International Conference on Intelligent Design and Analysis of Engineering Products, Systems and Computation, 09 – 10 July 2010, Sri Krishna College of Engineering & Technology Coimbatore 641 008, India.
4. J. Kandasamy, M.Manzoor Hussain, R.Aditya, S.Rajesham, Effect of the Weld Direction on Tensile Strength and Hardness in Friction Stir Weldments of AA 6351 Alloys, Proceedings of the International Conference on Emerging Research and Advances in Mechanical Engineering, ERA - 2009, organized by Department of Mechanical Engineering, Velammal Engineering College, Chennai, 19 – 21 March, 2009.
3. S.Rajesham, M.Manzoor Hussain, J. Kandasamy, Optimization Of Jig-Boring Process Parameters Using Mahalanobis Taguchi System, Proceedings of the International Conference on Computational Methods in Engineering and Sciences, CMES – 2009, 8 – 10 January, 2009, CBIT, Hyderabad
2. J. Kandasamy, M.Manzoor Hussain, S.Rajesham, Development of a Soft Tool for pattern recognition of Rolled threads using MTS, Proceedings of the International Conference on AECOSIM 07 at Arunai Engineering College, 30 – 31 March, 2007.
1. J. Kandasamy, G.Tirupathi Reddy, K. Srinivasa Rao, Perceptional views of Students on Quality in Technical Education – A Lagrangian Approach, Proceedings of the International Conference on Advances in Mechanical Engineering – 2005, Sree Venkateshwara University, Tirupathi.
6. J. Kandasamy, D. Nithin Kumar Gupta, Computational Analysis of Superplastic Forming of Magnesium alloys coated with Aluminum in Conical Dies, Proceedings of the National Conference on Emerging Trends in Mechanical Engineering, ETME – 2019, 09 – 10, January 2019, Department of Mechanical Engineering, National Institute of Technology, Warangal, pp. No.274 – 278.
5. S. V. Narasimha Rao J. Kandasamy, M. Manzoor Hussain, S. Rajesham, Computational Analysis and Modeling of ECAP Process, National Conference on Advances in Mechanical Engineering, 11th and 12th October 2012, Vasavi College of Engineering, Hyderabd.
4. J. Kandasamy, M. Govindaraju M. Manzoor Hussain, S. Rajesham, Automatic Tool Design for Friction Stir Welding Tools to Weld Aluminium Alloys, National conference on Excellence in New Technologies in Mechanical Engineering (ENTIME) 12th & 13th December 2009, Malla Reddy Engineering College for Women, Hyderabad 500 014, India.
3. M. Manzoor Hussain, J. Kandasamy, S. Rajesham, Optimization Of Reaming Process Parameters Using Mahalanobis Taguchi System, Proceedings of the National Conference on Robotics and Intelligent Manufacturing Process, RIMP January 2009, organized by Centre for Intelligent Machines and Robotics, Corporate R&D Division, BHEL, Vikasnagar, Hyderabad.
2. J. Kandasamy, M.Manzoor Hussain, S.Rajesham, Mahalanobis Taguchi System – Pioneering A Brand New Quality Concept For The Indian Industries, Proceedings of the National Conference on Trends and Innovations in Mechanical Engineering, TIME – 2007, organized by Department of Mechanical and Production Engineering, Deccan College of Engineering and Technology, Hyderabad.
1. J. Kandasamy, K.Sudhakar, M.Manzoor Hussain, S.Rajesham, Analysis Of Surface Roughness And Hardness On Wire Cut EDM Machined MMC’s ( 6061 Al/Sicp ) Using Taguchi Techniques, Proceedings of the National conference of CAME – 2005, JNTUCEA, Ananthapur.